1058 Commits (72220aa811087e8f4ee49639ff1798995d127ae5)

Author SHA1 Message Date
Pedro Alvarez bb0e31feda Reduce log level of SDUs dropped in the stack to info. Added ul_dropped_sdus to stack metrics. 4 years ago
Xavier Arteaga a19671802e Added SRSUE NR-PUSCH initial procedures 4 years ago
David Rupprecht 3dab82c42f Added interface that allows to update the lcid in case of a nr reconfiguration
nr rrc updates gw lcid if reconf was received
4 years ago
faluco 821925a273 - Upgrade to srslog the loggers in lib/mac.
- Adapted users of these classes and tests.
4 years ago
Xavier Arteaga a2d9b436d9 SRSUE: add NR stack to PHY and initial decoded PDU push 4 years ago
Xavier Arteaga e65c145704 SRSUE: Added hard-coded NR-PUSCH resources 4 years ago
Xavier Arteaga 77f0a53abd Added DCI Format 0_0 unpacking and more NR-PUSCH procedures 4 years ago
Xavier Arteaga b150e45129 Renamed NR-PHY state and fix license headers 4 years ago
Andre Puschmann 8e13f04684 mac_pcap: refactor MAC PCAP and include NR RAT into same object
after adding the thread-safe PCAP writer functionality to the EUTRA
MAC object it became clear that we don't wont to replicate the
same for the NR object.

This patch therefore refactors the class that now supports both EUTRA and
NR rats. The old mac_nr_pcap.[h/cc] has been deleted. All test-cases
and usages now use the new object that needs to pass the RAT type in
the ctor.

this patch addresses the last open point of #2160
4 years ago
faluco a7bb3ce7d0 Remove unused variable in vnf_phy_nr. 4 years ago
faluco d37a07a47f Replaced loggers in buffer_pool.h 4 years ago
Andre Puschmann ecf7eaec5c ue_stack_lte: expose MAC NR interface for NSA configs 4 years ago
Xavier Arteaga aaa789f530 Removed unused logger 4 years ago
Xavier Arteaga 92c4a38fc2 Fix logger for NR PHY 4 years ago
Xavier Arteaga 2421f2cd99 Multiple PHY fixes and NR-PHY configuration refactor 4 years ago
Xavier Arteaga b652cd68a5 Refactored NR PHY configuration to accept multiple CORESETs/SearchSpaces 4 years ago
Xavier Arteaga 10a7b63c6a NR-UE PHY transmits PRACH in all oportunities 4 years ago
Andre Puschmann f5c945dc2f mac_nr: add interface to set C-RNTI and contention ID from RRC
used during contention-based/free RA
4 years ago
Andre Puschmann 1aadc5c53e mac_nr: tiny cleanups of MAC class, use of new logger 4 years ago
Andre Puschmann 73cb0dabf2 mac_nr: move UE MAC class into own subfolder
this should simplify further MAC NR extensions and lead
to a more organized folder structure
4 years ago
Andre Puschmann da9e3363f1 mac_pdu_nr: rename MAC PDU class for NR to adhere naming conventions
* mainly to have _nr as trailing name for filename and class
* also add "sch" to class and filename (RAR PDU will have extra class)
4 years ago
faluco 5981469f9f
Upgrade loggers in srsue (#2163)
* Replaced UE logger in the ue class.

* Replaced loggers in the main phy class and prach.

* Replaced loggers in phy common and ta_control.

* Replace loggers in cc and sf workers.

* Replaced loggers in intra_measure, scell_recv, search, sfn_sync, sync.

* Remove last uses of the old loggers in the main phy class.

* Remove stray newline in logs.

* Replaced loggers in ue gw.

* - Started to replace loggers in the ue stack.
- Replaced loggers in usim and pcsc.
- Adapted nas and usim tests.

* Replace loggers in nas.

* Added missing log init calls in two previously modified tests.

* Replaced logger in nas idle procs.

* Replaced loggers in nas emm state.

* Replaced loggers in tft packet filter and adapted tft test.

* Replaced loggers in main RRC class.

* Replaced loggers in RRC cell.

* Replaced loggers in RRC meas.

* Replaced loggers in rrc procedures.

* Started logger replacement in MAC layer, more precisely in demux and dl_harq classes.
Been unable to inject loggers in construction for dl_tb_process due to very weird static assertions in the std::vector code being the type not constructible which is not true, so instead use the main MAC logger directly.

* Replaced loggers in mac mux class.

* Replaced loggers in mac pro_bsr.

* Replaced loggers in mac proc phr.

* Replaced loggers in mac proc SR and RA.

* Replace loggers in mac UL HARQ.

* Replaced loggers in main ue stack class.

* Fixed nas test crashing due to a null string.

* Ported mac_test to use the new loggers.

* Removed TTI reporting for the PHY log as the old logger did.

* Replaced loggers in UE phy tests.

* Configure loggers in nas_test.

* Replaced loggers in rrc_meas_test.

* Replaced loggers in rrc_reconfig_test.

* Added missing newline in tft_test.

* Fix compilation errors in TTCN3 tests.

* Fix linker error detected in CI and warning.

* Replaced loggers in TTCN3 tests.

* Fix a text replace error in some log messages.

* Remove trailing newlines from log entries.

* Remove old logger from rrc.

* Flush backend before printing the test status.

* - Fix compilation error from previous rebase.
- Remove trailing newlines from some missing log entries.
4 years ago
Andre Puschmann 4709bacefd srsue: add DL NR-ARFCN param
* add PHY param to set DL NR-ARFCN
* use new band_helper class to convert ARFCNs to supported bands
* signal supported NR bands in UE capabilities
4 years ago
David Rupprecht 9ccc36d4fa Make fake measurement frequency depend on measurement config 4 years ago
David Rupprecht 1b19ee40e7 Added usim features for key derivation 4 years ago
David Rupprecht ceda458bb3 Added MAC NR to EUTRA and NR with stack interfaces including MAC config build
Moved MAC logical channel config to MAC interface types
4 years ago
David Rupprecht e0420049e3 Build infrastucture for reconfig 4 years ago
David Rupprecht 64299960bd Added procedure for NR reconfiguration and RRC with NR complete 4 years ago
Xavier Arteaga 2baccc8b13 Set NR-PDSCH default table to 256QAM 4 years ago
Xavier Arteaga 3ee667c4a5 SRSUE: added NR-PDSCH constellation in GUI 4 years ago
Xavier Arteaga 59114206ae SRSUE: Unify PRACH reconfiguration conditions 4 years ago
Andre Puschmann a09fb95c25 proc_ra: protect RA procedure from concurrent thread access
that patch addreses issue #2199 by defering RA-related calls that
are executed from within PHY workers.

The time-critical bits of more complex functions such as tb_decoded()
are still executed in the PHY worker thread but the state machine
manipulation is defered.
4 years ago
Ismael Gomez a6423442c2
Refactor NR RA files and fix header includes all over library (#2162)
* Refactor NR resource allocation classes. Use DCI instead of grant for dummy PDSCH UE/eNB test

* Minor refactors in NR workers and ue_dl

* Fix include issues

* fix compilation issues
4 years ago
David Rupprecht 1a10c783b5 Faking measurements 4 years ago
David Rupprecht f7d313147a Added infrastrukture for measurements
Init rrc_nr as part of the LTE stack
4 years ago
David Rupprecht 4305929ec7 Hardcoded NR/MRDC-Capabilities 4 years ago
David Rupprecht b79eef0860 Introducing nr_rrc <-> rrc interface for eutra and nr cap query 4 years ago
David Rupprecht 9eb0b72cb4 Added rrc function has_nr_dc 4 years ago
Andre Puschmann 37fc1c59e3 fix DRB release logging
this caused wrong logs because the LCID was printed based on the assumption
that the DRB LCID is alwasy 2 + drb ID

Use drb_id as drb_cfg key
4 years ago
Xavier Arteaga b3200d9ef5 Renaming common UL/DL DMRS related types and initial NR PUSCH implementation 4 years ago
Xavier Arteaga 909e5de34f Fix NR workers 4 years ago
Andre Puschmann c8801578df gw: use std::chrono for metrics and fix nan display
* replace gettimeofday with std::chrono
* fix nan printing when nof_tti is zero (at startup)
4 years ago
David Rupprecht 81609d48dd Added measurment report for interrat nr15
Added function for removing interrat triggers
4 years ago
David Rupprecht 5df2fb1fa1 Added rrc has nr neighbour cells 4 years ago
David Rupprecht 0e4d77da76 Refactor eutra reporting code and add report triggers for inter rat measurements 4 years ago
David Rupprecht e4e67eebce Added infrastucture to process measurments and evaluate interrat triggers 4 years ago
David Rupprecht 25e5b88704 Added NR range_to_value function and debug logging for measurements 4 years ago
David Rupprecht ce4526a935 Extended measurements interrat nr r15 testcase with measurements 4 years ago
David Rupprecht 826dd32c89 Rename meas_cell to meas_cell_eutra
Added meas_cell_nr class

Make meas_cell list as template class

Inheritance rrc_cell to meas_cell_nr
Added process_new_cell_meas_nr function
4 years ago
David Rupprecht 62b558fccf Move rat type to common header
Removed phy measurement from rrc interface phy

Updated rrc interface for handling measurements
4 years ago
David Rupprecht 848496bb0f Moved get_earfcn to srslte get_carrier_freq func 4 years ago
David Rupprecht d4fb2dfb16 Added handling of inter rat measurement config function
Make report config more agonistic
4 years ago
David Rupprecht f4b0042c10 Added minimal interrat and nr measurement testcase
Added the handling of nr_r15 meas config
Added seperate handling of reportConfig for eutra
4 years ago
Andre Puschmann ab598dae3b gw: calculate GW throughput based on TTI timing
similiar like the RLC patch, MAC TTIs are passed to GW so the
rx/tx rate can be calculated based on the LTE timing
4 years ago
Xavier Arteaga d5d3594f49 Removed unused attribute 4 years ago
Xavier Arteaga f9643843a0 SRSENB/UE Fixed NR workers 4 years ago
Xavier Arteaga ac930003be SRSUE: Integrated NR workers 4 years ago
Xavier Arteaga a908fb6c5b Fix NR srsue/srsenb. Initial PHY NR in SRSENB. 4 years ago
Xavier Arteaga 2b2db90933 SRSUE: initial NR workers 4 years ago
Xavier Arteaga eed9405e40 Moved NR MAX MIMO layers to carrier 4 years ago
Xavier Arteaga c6798653be SRSUE: created initial PHY LTE worker pool 4 years ago
Andre Puschmann 07d2bc4fe8 change license header to agnostic version with hint to root LICENSE file 4 years ago
Xavier Arteaga 53d8319d2b SRSUE: protect secondary serving cell synch from concurrent access 4 years ago
Xavier Arteaga 287e651ef1 SRSUE: Protect nullptr buffer in secondary serving cell synch 4 years ago
Xavier Arteaga 959f37ae81 SRSUE: Renamed PHY scell_state to cell_state 4 years ago
Xavier Arteaga 4b8cd7ce92 SRSUE: protect scell state 4 years ago
Xavier Arteaga c5cb4d9984 SRSUE: Added time accurate SCell activation 4 years ago
Xavier Arteaga f64c268a69 SRSUE: Refactored MAC/RRC SCell Activation/Deactivation 4 years ago
Pedro Alvarez 454162cea7 Deleted nas_interface_stack. 4 years ago
Pedro Alvarez 604e79214d Changed NAS is_attached interface to is_registered. 4 years ago
Pedro Alvarez 5649ecaab0 Renamed nas_common.h to nas_config.h. Moved emm_state_t into nas_emm_state.h and nas_emm_state.cc. 4 years ago
Pedro Alvarez 96f39da5d7 Fixes for airplane simulator. 4 years ago
Pedro Alvarez 14844a168a Created new class to hold all NAS states for the NAS state machine. Added EMM-DEREGISTERED substates and EMM-REGISTERED substates.
Decoupled PLMN selection, attach request and service request. Removed RRC connect procedure from NAS.
4 years ago
Andre Puschmann 2be85217fd mac,ue: reset demux when restting MAC
this potentially fixes the issue we see during HO and RLF
under high DL load.

The issue happens because buffered DL PDUs are delivered to
RLC after reestablishing RLC that confuse the receiving
RLC entity bc the sequence numbers are very high, as opposed
to begin with zero again after reestablishment.
4 years ago
Andre Puschmann 7cf919e2af Fix MAC PDU packing after sending Truncated BSR (#2004)
* mac_test: add extended TBSR unit test

unit test to MAC UL packing after sending a TBSR

this fixes the MAC issues described in issue #2002

* mux: fix updating of LCG buffer state after packing PDU

we've previously lowered the buffer state of the LCG according
to the bytes that have been scheduled, but not according to
those that have been actually included in the PDU.

* proc_bsr: fix LCG buffer state updating for TBSR

when sending a TBSR do not update the internal buffer
state of the BSR proc.

This caused issues because the buffer state for all LCG that
are not included in the TBSR are set to zero, although at least
one LCG does have data to transmit.

* rlc_am: include LCID when logging retx of SN
4 years ago
Francisco Paisana 510959b50f update nr asn1 files, and asn1 tests 4 years ago
Andre Puschmann 082e002b67 nas: fix airplane mode simulation
the current implementation was somehow broken after a
NAS refactor. It was undetected because we didn't really
use it.

this fixes the simulation by using a single timer to simulate
airplane mode transitions.
the timer is rearmed in the timer_expire() function
if the correspondig event is set.

Has been tested to work well with, e.g.:

--sim.airplane_t_on_ms 5000 --sim.airplane_t_off_ms 10000
4 years ago
Xavier Arteaga 32ea840a30 INTRA: better ring-buffer protection 4 years ago
Xavier Arteaga 369cffec00 More deterministic SCell search test 4 years ago
Andre Puschmann fd5cde525c proc_bsr: fix race condition in BSR reporting
fix for #1934

This fixes a race condition between Stack thread and DL
PDU processing that lead to updates of the RLC buffer that
are undetected by the BSR routine.

What happens is that in a UL SCH PDU all outstanding data is transmitted
and and a LBSR with all zero buffers is sent.

14:39:47.327301 [MAC ] [D] [ 3793] BSR:   LCID=3 old_buffer=59
14:39:47.330600 [MAC ] [I] [ 3793] UL LCID=3 len=58 LBSR: b=0 0 0 0

Note that "old_buffer" isn't set to zero here.

At the same time (same TTI), the MAC PDU processing thread handles DL-SCH PDUs
that may generate new UL PDUs:

14:39:47.330749 [RLC ] [I] DRB1 Tx SDU (54 B, tx_sdu_queue_len=1)
14:39:47.330762 [RLC ] [I] DRB1 Tx SDU (54 B, tx_sdu_queue_len=2)
14:39:47.330775 [RLC ] [I] DRB1 Tx SDU (54 B, tx_sdu_queue_len=3)
..

Those PDUs are "new data" since the previous buffer state was zero.

Here is the race now between the threads, at the end of the bsr::step() function
old_buffer of each LCG is updated with the previous new_buffer, so
the buffer state of LCG=2 is now 59.

Now MAC starts the next TTI:

14:39:47.331910 [MAC ] [D] [ 3794] Running MAC tti=3794
14:39:47.331928 [MAC ] [D] [ 3794] Update Bj: lcid=0, Bj=0
14:39:47.331934 [MAC ] [D] [ 3794] Update Bj: lcid=1, Bj=0
14:39:47.331938 [MAC ] [D] [ 3794] Update Bj: lcid=2, Bj=0
14:39:47.331941 [MAC ] [D] [ 3794] Update Bj: lcid=3, Bj=-1752
14:39:47.331951 [MAC ] [D] [ 3794] BSR:   LCID=0 update new buffer=0
14:39:47.331960 [MAC ] [D] [ 3794] BSR:   LCID=1 update new buffer=0
14:39:47.331964 [MAC ] [D] [ 3794] BSR:   LCID=2 update new buffer=0
14:39:47.331971 [MAC ] [D] [ 3794] BSR:   LCID=3 update new buffer=335
14:39:47.331976 [MAC ] [D] [ 3794] BSR:    check_new_data() -> get_buffer_state_lcg(0)=0
14:39:47.331980 [MAC ] [D] [ 3794] BSR:    check_new_data() -> get_buffer_state_lcg(1)=0
14:39:47.331984 [MAC ] [D] [ 3794] BSR:    check_new_data() -> get_buffer_state_lcg(2)=59
14:39:47.331988 [MAC ] [D] [ 3794] BSR:    check_new_data() -> get_buffer_state_lcg(3)=0
14:39:47.331993 [MAC ] [D] [ 3794] BSR:   LCID=0 old_buffer=0
14:39:47.332000 [MAC ] [D] [ 3794] BSR:   LCID=1 old_buffer=0
14:39:47.332003 [MAC ] [D] [ 3794] BSR:   LCID=2 old_buffer=0
14:39:47.332007 [MAC ] [D] [ 3794] BSR:   LCID=3 old_buffer=335

And since the buffer state of LCG=2 isn't zero, the new data for LCID=3 of that LCG is considered.
So effectivly, the BSR missed the "empty" buffer state for a fraction of time and doesn't
consider the outgoing data generated in the same TTI as new. It therefore
doesn't transmit a BSR.

in which a BSR wasn't
4 years ago
Andre Puschmann d5286e70aa proc_bsr: refactor and add extra print_state() method
allows to call the print_state() routine from other places in the BSR
4 years ago
Francisco Paisana 514deaf25b fix resetting of phy and mac during reestablishment 4 years ago
Andre Puschmann a366500a78 rrc_proc: init cs_result to none
detected by Coverity CID 363053
4 years ago
Francisco Paisana 665b3996bb now the phy controller handles the scenario where the phy cell selection failed to be initialized 4 years ago
Andre Puschmann 937067a205 proc_phr: rename start_periodic_timer() and make sure its only started if a valid config is present 4 years ago
Andre Puschmann fab86382c1 mac,rrc: add interface to set SR config explicitly without touching any other MAC function
when releasing PUCCH/SRS (see 5.3.13 in 36.331) we need to reset the SR config as well.
In our case, SR is handled by MAC so we need to (re-)configure MAC, not all of
MAC though, just SR.
4 years ago
Francisco Paisana e7239163e9 silence noisy unhandled in_sync_ev logs 4 years ago
Francisco Paisana f185272367 added comments explaining the meaning of the cell reselection procedures 4 years ago
Francisco Paisana 49e7b8e36e - Change periodicity of cell reselection after a new serving cell has been selected
- Enable PHY intra measurements during RRC_IDLE
4 years ago
Francisco Paisana 585d7c923a refactor and simplification of cell selection procedure. Using now a SIB3 threshold to decide whether to select neighbor cell while in RRC_IDLE 4 years ago
Pedro Alvarez 5a4e71a6e4 Created k_enb_context structure that holds k_enb, NCC and NH to make it easier to restore context from failed handover. 4 years ago
Pedro Alvarez bcb422736c Save and restore NH on handover and handover failure. 4 years ago
Pedro Alvarez 3eb525563a Fix issue reading MNC length in USIM. 4 years ago
Xavier Arteaga 6ae47b6510 SRSUE: Deafult PUCCH/SRS does not imply full PHY dedicated defaults 4 years ago
Pedro Alvarez 22a6dc305f Moved common variables and functions from the usim and pcsc_usim classes into usim_base class. 4 years ago
Francisco Paisana 4ebe92f6a3 refactor phy configuration in the rrc to keep track of activated scells, and cells configurations 4 years ago
Francisco Paisana d910c910a4 rrc::meas_cell now uses stack timers instead of system timers. 4 years ago
Francisco Paisana 023d32975a avoid use of pointers to meas_cells in ho_proc as they may become dangling 4 years ago
Francisco Paisana 072b7be582 renamed rrc::cell_t to rrc::meas_cell 4 years ago
Andre Puschmann 0ef8e1fdac rrc: include pci when logging serving cell measurement
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell

15:49:11.357447 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS:  New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
4 years ago
Andre Puschmann ddbf4e1645 metrics_stdout: print new table header if neighbour cells change
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.

--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci  rsrp    pl    cfo  pci  rsrp  mcs   snr turbo  brate   bler   ta_us  mcs   buff  brate   bler
 0   2   -66    61  -3.3k   1   -76    11    18   1.1   8.4M     3%   0.0    21    262   167k     0%
 0   2   -65    60  -3.3k   1   -76    12    19   1.1   9.6M     2%   0.0    22    476   214k     0%
 0   2   -65    60  -3.3k   1   -76    16    22   1.3    13M     3%   0.0    23   1.1k   734k     0%
 0   2   -64    59  -3.3k   1   -76    17    23   1.3    15M     2%   0.0    23    602   424k     0%
 0   2   -63    58  -3.3k   1   -77    20    25   1.4    19M     3%   0.0    23    501   304k     0%
 0   2   -62    57  -3.3k   1   -77    22    27   1.8    20M    10%   0.0    22    417   418k     0%
 0   2   -61    56  -3.3k   1   -77    24    28   1.8    25M     9%   0.0    23    396   439k     0%
 0   2   -61    56  -3.3k   1   -77    26    29   1.5    23M    22%   0.0    23    841   407k     0%
 0   2   -60    55  -3.3k   1   -77    27    31   1.3    27M    11%   0.0    23    890   1.1M     0%
 0   2   -59    54  -3.3k   1   -77    27    32  1.00    30M     3%   0.0    23    583   524k     0%
 0   2   -59    54  -3.3k   1   -77    27    32  0.92    32M     1%   0.0    23   1.1k   503k     0%

--------Signal--------------DL-------------------------------------UL----------------------
cc pci  rsrp    pl    cfo   mcs   snr turbo  brate   bler   ta_us  mcs   buff  brate   bler
 0   2   -59    54  -3.3k    27    31   1.1    30M     4%   0.0    23   1.2k   529k     0%
 0   2   -60    55  -3.3k    27    30   1.4    25M    18%   0.0    23    540   442k     0%
 0   2   -61    56  -3.3k    26    29   1.6    23M    21%   0.0    23    536   429k     0%
 0   2   -62    57  -3.3k    24    28   1.8    23M    13%   0.0    23    834   456k     0%
 0   2   -62    57  -3.3k   1   -78    21    26   1.6    20M     7%   0.0    23    723   425k     0%
 0   2   -63    58  -3.3k   1   -76    17    22   1.1    15M     3%   0.0    23    470   267k     0%
 0   2   -64    59  -3.3k   1   -77    17    22   1.3    15M     3%   0.0    23    167   280k     0%
 0   2   -65    60  -3.3k   1   -76    14    21   1.3    11M     2%   0.0    22     57   223k     0%
 0   2   -65    60  -3.3k   1   -76    12    19   1.2   9.0M     3%   0.0    21    135   182k     0%
 0   2   -66    61  -3.4k   1   -70   9.3    17   1.0   6.9M     2%   0.0    21    246   126k     0%
 0   2   -67    62  -3.3k   1   -75   8.2    16   1.1   4.9M     3%   0.0    20    0.0   122k     0%
4 years ago
Pedro Alvarez 2f0125ef4e Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging. 4 years ago
Francisco Paisana 1f2cca8909 in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy 4 years ago
Francisco Paisana c6f4776a6f send the nassdus sooner in the rrc reconf procedure 4 years ago
Francisco Paisana fc49b5a030 implemented rrc reconfiguration procedure that includes a continuation when phy configuration is complete 4 years ago
Francisco Paisana b3eb9651d6 disable cqi in scells during handover procedure 4 years ago
Francisco Paisana 8a9a95a937 ensure sibs are acquired if cell selection calls cell search 4 years ago
Francisco Paisana 045f647914 fix edge case where serving cell is good enough for reestablishment but the sibs are not yet acquired 4 years ago
Francisco Paisana 5ecbe8fb17 cleanup of the reestablishment procedure state machine. It does not need to wait for the serving cell configuration because such procedure is already included in the cell selection procedure 4 years ago
Pedro Alvarez b3bfe336a9 Make sure that remote address test has a ip mask 4 years ago
Sylvain Munaut 5783c01cbb tf_packet_filter: Improve support for the different filter types 4 years ago
Francisco Paisana 0997daa7a0 now the handover procedure in the srsUE does not wait for the phy cell selection result. It only waits for the RA result 4 years ago
Ismael Gomez c75c463263
Use SNR instead of SINR for RLF threshold (#1769)
* Use SNR instead of SINR for RLF threshold

* Send in/out-sync only for cc_idx=0
4 years ago
Pedro Alvarez 86f4d469c6 Added some functions to save and restore AS keys for the case of failed handover in the USIM 4 years ago
Ismael Gomez b94d24ed98
Take into account CRS from neigbhour cells when measuring interference (#1757)
* Take into account CRS from neigbhour cells when measuring interference

* fix std::isnormal compilation

* Fixed compilation of test

* Address comments

* Remove unused overrides
4 years ago
Francisco Paisana cf89d6645b add comments explaining each function of the reest procedure 4 years ago
Francisco Paisana d068d594af implemented rrc reestablishment procedure part after sending reest request 4 years ago
Francisco Paisana 73e21daeb2 refactor reestablishment procedure to more closely follow TS. 4 years ago
Andre Puschmann 1afc137032
[REBASE] Make PHY non-blocking and fefactor HO procedure (#1753)
* Make PHY non-blocking and fefactor HO procedure

* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers

Co-authored-by: Ismael Gomez <ismagom@gmail.com>
4 years ago
Francisco Paisana 7f8af023b8 added a callback that always gets triggered when the phy cell selection completes. This callback checks if cell selection failed, and if so, sets the rsrp of the selected cell to -infinity 4 years ago
Ismael Gomez 5968157ea5
Protect better the access to shared variables in phy_common and metrics (#1750) 4 years ago
faluco 5acc1c9a73 - Cleaned up style in the PRACH class:
* Removed magic numbers.
* Reduced indentation of statements with early exists.
* Removed elses after a return statement.
* Trimmed unnecessary include files.
* Default initialized members in the class.
4 years ago
faluco 79f5b62551 - Calculate PRACH buffers on the fly when required instead of pregenerating all of them. 4 years ago
Andre Puschmann b616944a13 ue,rrc: fix security config during HO/reestablishment
we fix a number of very related issues for HO/reestablishment
in the success/error case:

* this patch removes the hard-coded check that intra-cell HO aren't
allowed. There are cases where eNBs use this method to update
the security context.

* the patch also fixes an issue after failed HO where the security context
of the source eNB should be used for the reestablishment.

* update security keys according to specs when mobilitycontrol
indicated change of key
4 years ago
Andre Puschmann 6827c2df21 rrc_meas: disable layer3 filtering until quantity config is received
the filter alpha was initialized to zero by default which causes an
issue because the first measurement for a cell can't be updated,
because the filtering function will always return the current value.

According to 36.331 Sec 5.5.3.2 Note 2, a k-value of 0 should turn
off filtering, which should be used as the default value until
an update is received from the network.
4 years ago
faluco 5e8a4c898d
Bring back the circular array object. (#1712) 4 years ago
Xavier Arteaga 52355024e7 SRSUE PHY: move mutex lock to cc worker and unlock for stack calls 4 years ago
Ismael Gomez f49fbd6d02
Fix the order of HO/reest measurement actions (#1696) 4 years ago
Andre Puschmann aec18a93d1 mux,bsr: refactor UL buffer status reporting
this patch fixes the UL BSR as per TS 36.321, it includes following
main changes:

* report UL buffer state to reflect the UEs transmit buffer after
  the MAC UL PDU containing the BSR has been built.
  In other words, if the UE, for example, can transmit all outstanding
  data in an UL grant, it will not report any pending data to transmit.

* refactor MUX routines and subheader space calculation
4 years ago
Ismael Gomez 06a5bdaab2 Process all calls to RLF in the main RRC task 4 years ago
Francisco Paisana 92221eb780 update of rrc_interface_mac to remove signal from mac to rrc that RA failed in case of handover failure 4 years ago
Francisco Paisana fca1273b3e avoid spurious warnings of trying to start the PRACH when it is already running during handover 4 years ago
Francisco Paisana fddcc3d8ea In the case of Handover, postpone the activation of the CQI and SR config present in the HO command for after the RA proc completion to the target eNB 4 years ago
Francisco Paisana 5242f9422b fix deadlock in handover 4 years ago
Francisco Paisana 834c0b3929 integrated new observer pattern into phy controller fsm 4 years ago
Francisco Paisana 48dd436d86 integrated observer pattern into rrc phy ctrl fsm 4 years ago
Francisco Paisana b1670c005b remove shadowed variables for reestablishment during handover 4 years ago
Francisco Paisana 8d10aa906e move defer_task to switch case in the rrc 4 years ago
faluco cfd3f51931
Import of srslog into srsepc and srsenb. (#1574)
* - Import of srslog into srsepc and srsenb.
* - Removed logger_file and logger_stdout files.
4 years ago
Xavier Arteaga 4e1e8cea1a SRSUE: MAC HARQ entities vector is fixed 4 years ago
Andre Puschmann 1199a79851 fix Scell sync for large cells
the PSS detection needs more temporary buffer than a full subframe.
we therefore need to allocate and initialize the sync object with
larger maximum size to support Scell search of large cells, e.g.
20 MHz

this fixes issue #1538
5 years ago
Xavier Arteaga 0192130742 SRSUE/SRSENB: UCI bits are carrier by the lowest serving cell index
SRSENB: Fix UCI in lowest serving cell index PUSCH transmission
5 years ago
Francisco Paisana 4fb8011a6d updated phy controller to use task scheduler 5 years ago
Francisco Paisana 9c5471b094 more ergonomic event callback 5 years ago
Francisco Paisana 58a9610efa use of stack event loop to propagate cell search and selection results 5 years ago
Francisco Paisana d48a45976e moved cell selection/search complete event signalling out of phy_controller 5 years ago
Francisco Paisana 48138b5281 removal of phy cell selection procedure as it now it is replaced by phy controller 5 years ago
Francisco Paisana 489969722e implemented phy controller FSM to perform cell selection & search. The controller also tracks the phy sync state 5 years ago
Andre Puschmann a7911f0dab pdcp,rlc: refactor SDU queueing policy
this patch refactors the SDU queuing and dropping policy of the RLC and PDCP layer.
the previous design had issues when packets have been generated at a higher
rate above the PDCP than they could be consumed below the RLC.

When the RLC SDU queues were full, we allowed two policies, one to block on the write
and the other to drop the SDU. Both options are not ideal because they either
lead to a blocking stack thread or to lost PDCP PDUs.

To avoid this, this patch makes the following changes:

* PDCP monitors RLC's SDU queue and drops packets on its north-bound SAP if queues are full
  * a new method sdu_queue_is_full() has been added to the RLC interface for PDCP
* remove blocking write from pdcp and rlc write_sdu() interface
  * all writes into queues need to be non-blocking
  * if Tx queues are overflowing, SDUs are dropped above PDCP, not RLC
* log warning if RLC still needs to drop SDUs
  * this case should be avoided with the monitoring mechanism
5 years ago
Francisco Paisana 5e06430455 removal of stack handler interface 5 years ago
Francisco Paisana 7c364070ee creation of task scheduler interface for classes/functions running outside the main control thread 5 years ago
Francisco Paisana 039977aeb5 renamed interfaces 5 years ago
Francisco Paisana 1a9c04bf2f use of task scheduler handle in pdcp 5 years ago
Francisco Paisana 4f5e65781f created task scheduler class to deal with timers, thread pool, multiqueue, internal tasks 5 years ago
Francisco Paisana 8c920837d6 fix issue when adding neighbour cell that matches serving cell 5 years ago
Francisco Paisana d746115130 moved serving cell to meas_cell_list 5 years ago
Francisco Paisana 928459408e fix cell meas sorting issue 5 years ago
Francisco Paisana d2dd30c8cb rrc_meas_test failing 5 years ago
Francisco Paisana 9a1f69113f created class for managing neighbor cells of rrc 5 years ago
Francisco Paisana 069dc1f751 moved cell struct of srsue::rrc to separate file 5 years ago
Andre Puschmann bd0c13aad0 ue_stack: bump priority of stack thread
the stack thread should really run with the next highest priority after
sync + phy workers to make sure it gets enough CPU
5 years ago
Francisco Paisana d12b037e0d make cell reselection periodic and with period of 20msec 5 years ago
Francisco Paisana c6f422d23e improved cell selection test in srsue::rrc 5 years ago
Francisco Paisana 3e016b8095 select serving cell during cell selection if it is stronger than neighbors 5 years ago
Ismael Gomez e378a45db0 Reorganized priorities to avoid GW starve the CPU 5 years ago
Andre Puschmann a5c0f96fa7 srsue: limit sync queue length to 1 for ZMQ radio
apply same change that we've done on the eNB also on the UE
to avoid the PHY processing TTIs faster than the stack.

Without that, we see lots of those in the logs:

...
08:39:17.580325 [STCK] [W] Detected slow task processing (sync_queue_len=7).
...
5 years ago
Andre Puschmann d16897c09a scell_sync: fix missing dtor freeing sync object 5 years ago
Andre Puschmann e981d5ee70 rrc,ue: refactor wait conditions before transition to RRC idle
before entering RRC idle, after receiving a RRC connection release for example,
we need to wait until the RLC for SRB1 or SRB2 have been flushed, i.e.
the RLC has acknowledged the reception of the message.

Previously we have only waited for SRB1 but the message can also be received on SRB2
and in this case both bearers need to be checked.

The method is now streamlined to check both SRBs and is also used when
checking the msg transmission of an detach request.
5 years ago
Xavier Arteaga f8cc2d176d Fix typo 5 years ago
Xavier Arteaga 2f0c38fc70 SRSUE: avoid deadlock while configuring cell from stack 5 years ago
Francisco Paisana fddcbc9879 fix vnf-ue stack interface 5 years ago
Daniel Willmann 31f1516d74 Use callback to establish connection before sending PDUs in TestmodeB 5 years ago
Francisco Paisana f0874b780b add radio_base/null classes 5 years ago
Xavier Arteaga 0e415260e9 SRSUE: scell_sync vector changed to map 5 years ago
Xavier Arteaga e0e8405285 SRSUE: initial scell sync
SRSUE: SCell Synch feedbacks delay

SRSUE: Implemented SCell Radio offset correction
5 years ago
Ismael Gomez 54b331c504
Adds best neighbour to CSV and stdout metrics (#1440) 5 years ago
Xavier Arteaga f04cf2090a Integrates number of samples in radio buffer
Fix minor issue

Radio: Fix minor bug and add unit test
5 years ago
Xavier Arteaga de230826b9 Added string helper for removing spaces and parsing list
Fix

Fix string parser
5 years ago
Xavier Arteaga 89b24b54e5 Refactored radio class for acommodating multiple RF devices 5 years ago
Francisco Paisana 0d38c33a60 rename ue phy nr class 5 years ago
Francisco Paisana 27e5d98ef9 added vnf phy nr 5 years ago
Francisco Paisana 81848deae2 extended handover procedure to accommodate all the handover (phy cell select + ra) 5 years ago
Francisco Paisana 556fcb69e7 fix handover my defering to next tti the reestablishment of bearers 5 years ago
Francisco Paisana 37ce475398 fix+refactor of the ue rrc handover preparation procedure to avoid deadlocking 5 years ago
Francisco Paisana 8f4f37e89b remove more unused rrc variables 5 years ago
Francisco Paisana 29fd147d41 remove unused rrc variables 5 years ago
Francisco Paisana b2aae8763b made mac_nr and rrc_nr final to avoid using virtual dtors 5 years ago
Francisco Paisana 452c043370 created a global map of lcids to srbs/drbs for NR 5 years ago
Francisco Paisana 4cf756434f add srsue::rrc_nr srsue::ue_stack_nr 5 years ago
Francisco Paisana 6a164e032d added srsue::rrc_nr 5 years ago
Francisco Paisana edba7f57e4 corrected mac_nr_pdu includes 5 years ago
Francisco Paisana 0b701022a3 added ue nr mac 5 years ago
Ismael Gomez b5ccbf1891 Simplify relationship between BSR, SR and RA procedures. Fix issue #1346 5 years ago
Xavier Arteaga ac0e347d94 SRSUE: refactored sync.cc and clean up 5 years ago
Xavier Arteaga dc927b745a SRSUE Removed async_scell_recv.h 5 years ago
faluco 9efa24bfa9 More warning fixes. 5 years ago
faluco 7ff251f112 - Fixed warnings caught by Clang 9.0.0 5 years ago
Pedro Alvarez 2ea78c8feb Added configuration options for stack logging. 5 years ago
Francisco Paisana de4d58d8fe fix coverity scan issues in master 5 years ago
Francisco Paisana af9ca9f9e5 remove unecessary moves 5 years ago
Francisco Paisana 12b2ea7dde remove warnings for base classes with no virtual dtors 5 years ago
yagoda 8e0b106c22 fixing some warnings from LGTM 5 years ago
Andre Puschmann 1e0c8ead4c srsue,sync: fix TTI gap calculation and reporting
The current TTI gap calculation assumes strict continuity
of radio time stamps, even when retuning, changing sample rate, etc.

This is certainly desireble but not necessaritly the case and may cause
issues when negative time gaps or too large gaps are detected and reported
to the stack.

this patch makes the assumption that valid TTI jumps are between 1ms
and 1s and that larger gaps are the result of screwed time-stamps
or too long radio operations.
5 years ago
Xavier Arteaga 58803d1b3e Added UL EARFCN map and UE PHY interface cleanup 5 years ago
Xavier Arteaga 89dcd6339f More LGTM fixes 5 years ago
Xavier Arteaga 77d5dedddc Fix LGTM warnings and recommendations 5 years ago
Francisco Paisana 6ddedd5972 moved pdu to common mac folder 5 years ago
Xavier Arteaga 11a2d2cc4a Fix and tidy up time offset in srsue 5 years ago
Francisco Paisana c09f76ed6c unified stack task defer method 5 years ago
Andre Puschmann d35c9e2b89 nas: add support ot UE test loop mode B
extend GW-NAS interface to signal test mode activation.
The method is a noop in the normal GW but is implemented in
the TTCN3 DUT according to TS 36.509 for Mode B
5 years ago
Andre Puschmann 66a799661e gw,tft: move traffic flow template matching into own class
this prepares the reuse of the matching functions for the TTCN3 DUT.
create own matcher class that the GW uses.
5 years ago
Xavier Arteaga 198684ce32 SRSUE: all TA control logic into a single class and faster TA response 5 years ago
Francisco Paisana a2ade9edd1 break down rrc_interface_types.h into multiple files. moved pdcp_config.h to same folder 5 years ago
Daniel Willmann 925225dbeb Implement Close UE Test Loop/Complete messages
This commit implements support for the CLOSE_UE_TEST_LOOP message.
Currently the mode is not saved and looping the data is not implemented.
Only the *_COMPLETE message is sent back as a response.
5 years ago
Andre Puschmann acc2948b45 nas: fix security handling
First of all, with this the NAS conformance tests pass with ciphering and
integrity turned on. Before only integrity was working.

Mainly the NAS was applying the integrity protection and/or ciphering
incorrectly because it wasn't taking the secuirty status of the PDUs
into account. Some where already correct, some not. The patch
streamlines the handling for all outgoing messages.
5 years ago
Xavier Arteaga 25312e81b4 SRSUE: cell select RRC MEAS CFO is carried to PHY Cell object 5 years ago
Xavier Arteaga 051e8fcc52 SRSUE: Apply default PHY config to SCell as well 5 years ago
Xavier Arteaga e9813375eb SRSUE: set SNR threshold for MIB decoding 5 years ago
Xavier Arteaga 6d355ab61e SRSUE: Fix HO initial CFO 5 years ago
Francisco Paisana 30ae2226c1 common interface for stack multiqueue tasks, background tasks and timers 5 years ago
Andre Puschmann 62e4bd9469 log_ptr: fix issue if accessing log_ptr that was reset already
during deinit of the UE/eNB it could happen that the log_ptr
was already set to null but the stack thread was still accessing
it through log_h->info()

i've moved the old macro into a new header and used as as much
as possible. there are still places in the code where similar
macros are used but we would need to change the variable name
to replace them
5 years ago
Andre Puschmann dbb8b6a360 nas: add helper for entering new state in FSM
the helper will log the event
5 years ago
Andre Puschmann d8680cc9a8 nas: add helper to pack attach request and send to RRC 5 years ago
Andre Puschmann cf28276a3a nas: add helper function to reset NAS security context 5 years ago
Andre Puschmann 94c6034339 nas: rename start_attach_request to start_attach_proc
this is to better differentiate from "send_attach_request" that
only packs and send the actual attach request message. The
entire attach procedure may include PLMN search, etc.
5 years ago
Andre Puschmann 15c47fab56 nas: adding t3402 to restart attach after initial attach attempt counter expired 5 years ago
Andre Puschmann 7ef56cb637 nas: add an attach attempt counter as described in 24.301 5 years ago
Francisco Paisana 599588ff51 removed uneeded locks in the rlc, moved ue stack get_metrics to stack thread, solved the idle procedure double-locking 5 years ago
Ismael Gomez 95c6916987
Improve robustness in RF Overflow (#1124)
* Use task id to track old background tasks in RA procedure

* Improve robustness against RF overflow in PHY

* Increase SNR out-of-sync threshold

* Do not change frequency if it's the same

* Increase sync priority

* Increase time to start receiving to reduce input buffer occupation

* Use scoped lock in sf_worker
5 years ago
Francisco Paisana 8e837e173d printf has already a way to pad spaces. If we use it, we can avoid accidentally adding extra logs because we did srslte::logmap::get("MAC") instead of srslte::logmap::get("MAC ") 5 years ago
Francisco Paisana aeed623734 removed pdu processing from the ue rrc cmd queue. Instead, now the rrc processes the incoming pdus right away. This is essential to fix the security cmd issue in the ue 5 years ago
Andre Puschmann b9a2217355 fix uninit vars reported by Coverity 5 years ago
Andre Puschmann 3f10224729 refactor airplane mode simulation and move to NAS
- move handling to NAS
- use switch off to enable airplane mode (don't wait for EPC response)
- add tiny FSM to control airplane mode activation/deactivation
- only start on/off counter after state has been entered
5 years ago
Francisco Paisana e91a7ea513 removed stack-mac interface dedicated methods. We use now the task dispatch methods instead 5 years ago
Francisco Paisana de03c96c3b mac::process_pdus now uses the stack task dispatch interface 5 years ago
Francisco Paisana 7f6bde59fc move write_pdu_pcch and write_pdu_bcch_bch to stack thread 5 years ago
Francisco Paisana de3c28e52d added task dispatch capabilities to stack interface 5 years ago
Francisco Paisana 46a1be3e76 updated mac-rlc interface to use unique_byte_buffer 5 years ago
Francisco Paisana 82cb6baef0 now the whole ue and enb mac uses the logmap 5 years ago
Francisco Paisana 45bc123967 remove manual tti counters from the rrc 5 years ago
Francisco Paisana 138347b6b5 nas using stack timers 5 years ago
Francisco Paisana 770f04b92a the rrc now only works with the stack latest tti, instead of mac's tti 5 years ago
Francisco Paisana e3e5b5be11 removed tti from some mac subcomponent interfaces 5 years ago
Francisco Paisana d3f49d0e3c changed interface sync-stack to allow tti jumps > 1 5 years ago
Francisco Paisana e73cbb09b0 created tprof statistic for sliding windows 5 years ago
Ismael Gomez cf4f4508ce Normalize throughput in CSV/stdout metrics with respect to number of TTIs 5 years ago
Ismael Gomez a1f1b44e26 Fixed flush period 5 years ago
Ismael Gomez 1da7b2c8b9 Fix compilation issue 5 years ago
Ismael Gomez 23cc42ce9f CSV metrics per carrier. Add options to flush file earlier and append to file 5 years ago
Xavier Arteaga e832769ae6 Updated copyright 5 years ago
Andre Puschmann 70ffe79b43 add support for periodic airplane mode simulation in srsUE 5 years ago
Ismael Gomez e8b8c9922e
Add RF per-channel frequency band constraints (#1026) 5 years ago
Xavier Arteaga 76408b195e Rename TX_DELAY and FDD_HARQ_DELAY_MS 5 years ago
Xavier Arteaga e8f9bfc6ba Addition of PRACH TA correction 5 years ago
Pedro Alvarez 96c82b3fc6 Moved PDCP configs to pdcp_config.h. Added `as_security_cfg_t` structure to hold access stratum keys.
Refactored PDCP, RRC and USIM accordingly.
5 years ago
Andre Puschmann 5b8b718482 simplify NAS security handling and fix missing call in act test mode complete
add extra method to apply NAS security config, if configured,
that can be used by each NAS message sender
5 years ago
Ismael Gomez 4e12405fff
Remove radio_multi class and organize channels, ports and carrier buffers (#1019) 5 years ago
Andre Puschmann 664170fec6 pcap: add CC index when writing PCAP 5 years ago
Andre Puschmann df31a5c4cc store CC idx in DL/UL HARQ entity 5 years ago
Francisco Paisana fed06138b9 moved rach_detected to stack thread. Created a more friendly interface to enqueue tasks in stack 5 years ago
Andre Puschmann 8e4f2a4d59 add UE parameter to enable TTI stats calculations 5 years ago
Andre Puschmann a8bbe551ac move thread class into srslte namespace to avoid ambiguity between std::thread 5 years ago
Andre Puschmann 8b46f631c1 add basic TTI stats in stack 5 years ago
Andre Puschmann ae4cfb50f2 print warning to console if TUN interface couldn't be setup 5 years ago
Andre Puschmann 51864bc03c rrc: print release cause when receiving rrc connection release 5 years ago
Francisco Paisana ac52208409 removed most of clang-tidy warnings, introduced logmap in asn1, fixed info object naming in s1ap and ngap for successful and unsuccessful outcomes 5 years ago
Andre Puschmann dffa2af461 fix NAS re-attach after detach request from network
needed to add a timer to delay transmission of attach request
to allow RRC release on eNB side
5 years ago
Francisco Paisana e859d622c7 added logref class to forbid logmap pointer invalidation. Created a test for the logref, and introduced it in the scheduler, rrc and nas 5 years ago
Francisco Paisana 5a64fc0a93 sib_acquire_proc is not tti-driven anymore. No need to call run explicitly 5 years ago
Francisco Paisana 925ac862cb sib acquiring is failing for sib2 5 years ago
Francisco Paisana c29f08d8d5 refactored si acquisition procedure to use stack timers. Also created an interface that is going to be used for the task/timer handling 5 years ago
Francisco Paisana 22f51bb30b made cell select non-blocking using background threads 5 years ago
Ismael Gomez 72e6fa40fc Fix multiple issues with DCI sizes when using CA. 5 years ago
Ismael Gomez 4fb83ae26d Run configure_prach_params as a background task 5 years ago
Andre Puschmann 265037c202 some tiny MAC code refactoring and typo fixing 5 years ago
Xavier Arteaga 6672f6df0f Minor aesthetic changes in intra measure class and changed scell_search test arguments 5 years ago
Xavier Arteaga 344016ef0a Refactored and commented SRSUE's Intra measure component 5 years ago
Francisco Paisana c76cdc6cea refactored the serving cell config procedure. there was one more state than it was needed. 5 years ago
Andre Puschmann c7343cf6d8 protect sf_buffer from overrun in receive_samples
this patch adds a buffer len paramter to the receive_samples() call
that protects the (also) provided buffer from overflowing.

currently each call to srslte_ue_sync_zerocopy() which then calls receive_samples()
relies on a buffer that is "big enough". But that buffer is sometimes
2 subframes, sometimes 3 or 5, sometimes has space for the maximum PRB size, sometimes
only for 6 PRBs (i.e. during cell search).

By extending the interface to pass the buffer size we can make sure that
only samples are received that actually fit inside the provided buffer.
5 years ago
Andre Puschmann 7c1b4c1f12 add support for IMEISV when requesting UE idendity 5 years ago
Ismael Gomez f2851b037e Fix concurrency issue in set_crnti() 5 years ago
Xavier Arteaga 4d3c28ff97 SRSUE: wait for valid RSRP measurement before adquiring SIBs during cell search 5 years ago
Xavier Arteaga fe199e6be2 SRSUE: Undo enable/disable RA procedure flag 5 years ago
Xavier Arteaga f8294fb9df SRSUE: RRC measurements refactor and more fixes 5 years ago
Ismael Gomez 52716f8716 Process HO complete in the background to avoid heap-after-use bug when PHY measurements are reported during a HO
rrc_meas refactor. Need to split commit

Fix typo

Temporal commit

Apply rx_gain_offset to neighbour cell measurements

srsLTE: modify TESTASSERT Macro to follow codeline

SRSUE: prevent RRC from having serving cell in neighbour list

SRSUE: DL HARQ does not need Time Aligment Timer. UL is disabled using PUCCH resources release

SRSUE: extend intra-frequency to CA SCell

SRSUE: fix confusing/ambiguous code in the RRC measurements and fix concurrency issue

SRSUE: remove RRC measurement report triggers when measurements are modified or HO succesful

SRSUE: fix compilation issues and Reest SIB indexes

Fixes sync using incorrect cell configuration when search cell does not find a correct cell

Small refactor to remove measurement report triggers always after removing measurement

SRSUE: Removed SIC PSS from UE

SRSUE: fix inter-frequency reestablishment and added more traces

SRSUE: Fix compilation issue
5 years ago
Francisco Paisana ea777d92e8 applied new logmap class to nas 5 years ago
Ismael Gomez 17f9ff326b Expose in-sync and out-of-sync constants to ue.conf 5 years ago
Andre Puschmann b0bfc7956d use const& in metrics interface 5 years ago
Andre Puschmann 77522a6b69 add srsUE parameter to change netns before creating TUN in GW 5 years ago
yagoda 260648582e small formatting fix 5 years ago
yagoda fc1c506d1f refactoring TA command structure in UE 5 years ago
Xavier Arteaga c92dce71b7 srsLTE: AGC only uses boundaries for requesting gain to Radio 5 years ago
Xavier Arteaga 384c420c7c SRSUE: fix phy workers concurrency issue 5 years ago
Andre Puschmann 4a9e3728c9 add condtional variable for PHY initialization and configuration
adding a cond variable and mutex to protect init and (re-)config of PHY
currently this is only used during init. If the stack couldn't be
initialized but the PHY init thread was already started, we need to
properly wait until this is done
5 years ago
Andre Puschmann 3127f59b4c wait with init of GUI until cell is found and initialized
with the stack refactor we've introduced a regression in which
the GUI was started too early when no cell was found yet.

this caused the GUI to be initilized with only one Tx port. When connecting
to a cell with ports, the GUI plotter would then write
into unitialized memory.
5 years ago
Pedro Alvarez c5979f59eb Clang format UE, eNB and lib (#850)
* Clang-formated UE, eNB and lib.
* Fixed compiling errors from clang-format.
* Fix linking issues introduced by clang-format
* Fix poor formating in initializing arrays of arrays.
* Fix mistake in conflict resolution on rm_turbo.c
* Re-apply clang format to gtpc_ies.h
5 years ago
Andre Puschmann 8a064cd3a6 pass msg_type from caller when logging RRC message
before the type of some message wasn't displayed correctly,
like SIBs, for example because the logger didn't
know the filed to retrieve the type string
5 years ago
Andre Puschmann fa2821a4e7 fixing periodic measurment reporting
fixes various issues with unset timers, interval parameters, etc.
with those fixes, TC_8_3_1_1 and TC_8_3_1_2 pass
5 years ago
Francisco Paisana d59016ae68 use of srslte::log* type for ASN1 logging. Initialization of the asn1 and rrc_asn1 loggers done now in both the ue and enb 5 years ago
Xavier Arteaga bcde542111 SRSUE: fix typo 5 years ago
Xavier Arteaga a8763cb7a0 SRSUE: Added Cell PCI in console trace 5 years ago
Xavier Arteaga d96836a0fa SRSUE: Stack TTI based purely in radio timestamp 5 years ago
Xavier Arteaga 6d896ee453 Fixed more static code analysis warnings 5 years ago
Xavier Arteaga b48bb0d754 Removed atof, atoll and atoi calls 5 years ago
Xavier Arteaga b4b1ab94af SRSUE RRC: new PHY unknown sync state, cell select waits for PHY in-sync 5 years ago
Xavier Arteaga 67935d2b99 SRSUE: RRC blocks MAC RA procedure during reestablishment 5 years ago
Andre Puschmann 8ef0d6c6ca do not automatically consider cells for which a measurment has been received as "in sync"
the in_sync flag has been misused in some parts of the code
receiving a PHY measurement for a cell does not automatically
mean that we are "in sync", as it is used in RRC as a condition
to indicate if we are camping on cell

the in_sync/out_of_sync condition should only be altered by the
corresponding functions sent from the PHY for the currently selected
cell (and not automatically for all cells)

the commit also removes the deletion of cells which are not "in sync"
from the list of neighbor cells. Instead, RRC calls a clean-up function
peridically that deletes old cells eventually.
5 years ago
Xavier Arteaga f5e4ff9f4d SRSUE: RRC Reest Procedure Refactor 5 years ago
Xavier Arteaga f37a096f10 SRSUE: Refactored/Fixed RRC connection Re-establishment and minor CLang Format/Tidy fixes 5 years ago
Francisco Paisana 54992e72f1 fixed and simplified multiqueue task api to avoid dangling pointers. 5 years ago
Francisco Paisana b2d3c2a150 fix compilation issue 5 years ago
Francisco Paisana ac4d3b9624 std::functions do not accept move-only captures. So I had to create a wrapper earlier. In this PR, I cleaned a bit the previous API for the code to be a bit more readable 5 years ago
Francisco Paisana 177e880293 removed extra threads from enb rrc 5 years ago
Andre Puschmann 1a7142d73f fix GW init procedure and set pool instance in ctor 5 years ago
Andre Puschmann d25a734200 fix uninit value in NAS and move emm_info on stack 5 years ago
Francisco Paisana d2c56caf7e applied new timer class to the whole code base 5 years ago
Francisco Paisana b254bdbb93 typedefed the proc_result_t<void> to become proc_state_t 5 years ago
Francisco Paisana f2d88e5a5b simplified NAS rrc connection request procedure
move non-type-specific methods of proc_t to its base class.
procedure state machine was simplified via a future-type. Now procedures dont get stuck until the user reads the procedure outcome.
made the NAS procedures more event trigger/reaction-based.
5 years ago
Francisco Paisana 8864787f59 added the continuation functionality to procedures via the "then()" method. 5 years ago
Francisco Paisana c1be118d1d new wrapper-based design for stack procedures. Removes extra base class, gets rid of spurious copies/moves during the pop(), and allows the use of a non-default ctor() 5 years ago
Francisco Paisana 8980810061 added some util print functions and fixed the issue with sync::cell_select when the last cell search was not successful 5 years ago
Andre Puschmann 82e3fd1052 fix uninitialized vars in RRC 5 years ago
Andre Puschmann 891a66a2e5 make the establishment cause a paramter when sending a connection request
needed to signal a mo_sig establishment cause after a RLF
5 years ago
Andre Puschmann c24b25f42e after RLF store PCI of current serving cell
the PCI is needed for the reestablishment request in case
the new serving cell has changed
5 years ago
Francisco Paisana 9bcb268421 added for-range loop and bool decay checks to clang-tidy. Applied some of the recommendations of clang-tidy to nas.cc 5 years ago
Andre Puschmann cf548fe807 nas: add handling of T3410/T3411 5 years ago
Andre Puschmann 35307a047a make UE switch_on non-blocking
this allows a simpler main that just signals NAS to switch on the UE
but doesn't block until the action is completed.

For making sure the UE also attached if the first attempt failed
the NAS needs to be extended to support the correct timers.
5 years ago
Francisco Paisana 81a466a641 since we moved cell search to the background thread, cell reselection prints a error message that it cannot start. In fact it already started. It is just waiting for the cell search to finish. This PR fixes this 5 years ago
Francisco Paisana e67f66e539 moved cell search completed signal from the background thread to the stack thread 5 years ago
Ismael Gomez 1d83bb08e2 Changes in ACK procedure to support CA. Tested 1 cell in SISO/MIMO 5 years ago
Francisco Paisana b1496317d5 fixed the pcch proc issue by letting the cell selection explicitly propagate its result to the pcch_process_proc 5 years ago
Andre Puschmann 3c6ff0da30 make NAS logging less verbose 5 years ago
Andre Puschmann c5f52adfba nas: fix issue in which NAS wouldn't allow to attach once it failed
the main issue was the plmn_selected variable. the solution
was to create a function to enter the deregistered state that resets the variable
and performs all other actions that need to be performed, like clearing
EPS bearers.

The patch also extends the SS to support AT commands to enable/disable
data services and now succesfully passes TC_9_2_2_1_7
5 years ago
Francisco Paisana 2fb830fcfa moved cell search to background task thread pool, and provided a stack interface to rrc to call "start_cell_search". Once completed, the background task signals back to RRC 5 years ago
Andre Puschmann 0467d8bc84 rework neighbor cell handling 5 years ago
Andre Puschmann c7f0caa24a add TTI field to MAC dl/ul grants and fix PCAP to include TTI 5 years ago
Francisco Paisana 6db0e474be moved RA waiting procedure to a background task of the stack thread pool 5 years ago
Xavier Arteaga efdec15964 Renamed lock_guard (lg) to lock 5 years ago
Xavier Arteaga 665f899a74 Fixed some coverity and Clang tidy warnings 5 years ago
Andre Puschmann f94d2537a3 nas: send identity response integrity protected if security ctxt is present 5 years ago
Andre Puschmann bb84b27f0b fix RRC connect proc in NAS to allow reattch after detach 5 years ago
Francisco Paisana e92632e729 zero-initialized mbms rrc interface types 5 years ago
Francisco Paisana fc9bb3c934 removed rrc asn1 header include from the ue_interfaces and phy 5 years ago
Andre Puschmann 2f47010eb6 fix various uninitialized vars 5 years ago
Xavier Arteaga 35f85c651c SRSUE: Added SCell synchronizer and measurements based on reference signals 5 years ago
Xavier Arteaga 8e17aba5d8 Improved SSS decoding and improved scell_search_test 5 years ago
Xavier Arteaga 54974d935e SRSUE PHY: unitialised values and attributes clean-tidy up 5 years ago
Xavier Arteaga 78fcc11a30 Fixes minor unitialised/leaked memory 5 years ago
Ismael Gomez 0984debe1b
Fix issues with RLF in B210 and X300 (#669)
* Calling tx_end() from radio_reset() causes long execution time in B210. Using boolean to call later instead. Fixes RLF failing in B210. Checked in X300

* Fix issue #655
5 years ago
Francisco Paisana 946ead06e8 using an interface between the stack and lower mac to process demux pdus. 5 years ago