SRSUE: Unify PRACH reconfiguration conditions

srsue/hdr/phy/prach.h

@@ -30,7 +30,6 @@ public:
   void  init(uint32_t max_prb, srslte::log* log_h);
   void  stop();
   bool  set_cell(srslte_cell_t cell, srslte_prach_cfg_t prach_cfg);
-  void  reset_cfg();
   bool  prepare_to_send(uint32_t preamble_idx, int allowed_subframe = -1, float target_power_dbm = -1);
   bool  is_ready_to_send(uint32_t current_tti, uint32_t current_pci);
   bool  is_pending() const;

srsue/src/phy/phy.cc

@@ -466,18 +466,15 @@ bool phy::set_config(srslte::phy_cfg_t config_, uint32_t cc_idx)
 
   Info("Setting configuration\n");
 
-  // The PRACH shall be re-configured only if:
+  // The PRACH configuration shall be updated only if:
   // - The new configuration belongs to the primary cell
   // - The PRACH configuration is present
-  // - The PRACH configuration has changed
-  bool reconfigure_prach = !cc_idx && config_.prach_cfg_present && (prach_cfg != config_.prach_cfg);
-
-  if (reconfigure_prach) {
-    prach_buffer.reset_cfg();
+  if (!cc_idx && config_.prach_cfg_present) {
+    prach_cfg = config_.prach_cfg;
   }
 
   // Apply configuration after the worker is finished to avoid race conditions
-  cmd_worker.add_cmd([this, config_, cc_idx, reconfigure_prach]() {
+  cmd_worker.add_cmd([this, config_, cc_idx]() {
     log_h->info("Setting new PHY configuration cc_idx=%d...\n", cc_idx);
     for (uint32_t i = 0; i < args.nof_phy_threads; i++) {
       // set_cell is not protected so run when worker is finished
@@ -488,13 +485,10 @@ bool phy::set_config(srslte::phy_cfg_t config_, uint32_t cc_idx)
       }
     }
     log_h->info("Finished setting new PHY configuration cc_idx=%d\n", cc_idx);
-    if (reconfigure_prach) {
-      // Reconfigure PRACH parameters only if configuration is different
-      prach_cfg = config_.prach_cfg;
-      log_h->info("Setting new PRACH configuration...\n");
-      configure_prach_params();
-      log_h->info("Finished setting new PRACH configuration.\n");
-    }
+
+    // It is up to the PRACH component to detect whether the cell or the configuration have changed to reconfigure
+    configure_prach_params();
+
     stack->set_config_complete(true);
   });
   return true;

srsue/src/phy/prach.cc

@@ -12,6 +12,7 @@
 
 #include "srsue/hdr/phy/prach.h"
 #include "srslte/common/log.h"
+#include "srslte/interfaces/phy_interface_types.h"
 #include "srslte/interfaces/ue_interfaces.h"
 #include "srslte/srslte.h"
 
@@ -83,11 +84,6 @@ void prach::stop()
   mem_initiated = false;
 }
 
-void prach::reset_cfg()
-{
-  cell_initiated = false;
-}
-
 bool prach::set_cell(srslte_cell_t cell_, srslte_prach_cfg_t prach_cfg)
 {
   if (!mem_initiated) {
@@ -95,8 +91,7 @@ bool prach::set_cell(srslte_cell_t cell_, srslte_prach_cfg_t prach_cfg)
     return false;
   }
 
-  // TODO: Check if other PRACH parameters changed
-  if (cell.id == cell_.id && cell_initiated) {
+  if (cell.id == cell_.id && cell_initiated && prach_cfg == cfg) {
     return true;
   }
 
@@ -110,7 +105,8 @@ bool prach::set_cell(srslte_cell_t cell_, srslte_prach_cfg_t prach_cfg)
     return false;
   }
 
-  Info("PRACH: configIdx=%d, rootSequence=%d, zeroCorrelationConfig=%d, freqOffset=%d\n",
+  Info("PRACH: cell.id=%d, configIdx=%d, rootSequence=%d, zeroCorrelationConfig=%d, freqOffset=%d\n",
+       cell.id,
        prach_cfg.config_idx,
        prach_cfg.root_seq_idx,
        prach_cfg.zero_corr_zone,
@@ -126,6 +122,8 @@ bool prach::set_cell(srslte_cell_t cell_, srslte_prach_cfg_t prach_cfg)
   transmitted_tti = -1;
   cell_initiated  = true;
 
+  log_h->info("Finished setting new PRACH configuration.\n");
+
   return true;
 }