35e7867771
move license info for pcsc class from LICENSE to COPYRIGHT file
4 years ago
841e09b183
add tentative changelog for 20.10 release
4 years ago
df46a3284c
Add missing device names to enb.conf.example
...
The enb.conf.example config was missing the options "soapy" and "zmq" for device_name.
4 years ago
8c7b7cc55a
libsrslte_rf: add library version
...
This patch adds version string to the 'libsrslte_rf' library.
This results in the library being built as
libsrslte_rf.so.20.04.2
with the following symbolic links
libsrslte_rf.so.0 -> libsrslte_rf.so.20.04.2
libsrslte_rf.so -> libsrslte_rf.so.0
The SRSLTE_SOVERSION variable should be increased with each backwards
incompatible change of the library.
Signed-off-by: Jan Remes <jan.remes@invasys.com>
4 years ago
a94f08f70d
bump version string for 20.10 release
4 years ago
ffb9f60e1a
update readme and bump version of 20.04.2
4 years ago
00ac85e1b3
Small compilation fixes for GCC 10.1
4 years ago
3eb525563a
Fix issue reading MNC length in USIM.
4 years ago
c46402c836
fix phy configuration during handover on srsenb. The function srsenb::rrc::ue::fill_scell_to_addmod_list assumes that the phy_cfg of the PCell is up-to-date, which was not the case. With this PR, the srsenb rrc updates the phy_cfg before the ho cmd is sent, but, in the case of intra-enb ho, the updates are not submitted to the phy before the reception of the crnti mac ce
4 years ago
da54e2b501
Better docs in RRC interface types and apply clang-format
4 years ago
6ae47b6510
SRSUE: Deafult PUCCH/SRS does not imply full PHY dedicated defaults
4 years ago
9105b36cee
srsenb: backport of a Xico's patch to explicitly link against libconfig
...
this caused issues for some systems in parallel builds
4 years ago
5325a15d42
fix libconfig std::string cast linking issue
4 years ago
0f51d70aac
fix measObj addition in srsenb. Now the enb considers both scells and meas_cells in the rr.conf
4 years ago
5e95fd4a43
ul_harq: reduce log level for new_grant_ul() if RNTI isn't found
...
this avoid logging a warning on UE shutdown if the MAC is already reset
but one of the PHY workers still decodes an UL grant for the old RTNI
21:30:29.254844 [RRC ] [I] Going RRC_IDLE
21:30:29.254848 [RRC ] [I] Proc "Go Idle" - Left connected state
21:30:29.259499 [PHY0] [I] [ 3865] Finished setting new PHY configuration cc_idx=0
21:30:29.259512 [PHY0] [I] [ 3865] Setting new PHY configuration cc_idx=0...
21:30:29.264190 [PHY0] [I] [ 3867] Finished setting new PHY configuration cc_idx=0
21:30:29.275036 [PHY1] [I] [ 3872] PHICH: hi=1, corr=1.0, I_lowest=1, n_dmrs=0, I_phich=0
21:30:29.275050 [MAC ] [W] [ 3872] Received grant for unknown rnti=0x46
4 years ago
362461329a
rrc: improve log message when detecting RLF
4 years ago
ae32ab9b13
addressed xavie's comments regarding list of scells to add to rrc reconf message not being in order when we iterate it
4 years ago
d42cdca729
fix scell activation in the phy during intra-enb handover.
4 years ago
76c648106f
rrc: remove varMeasState for unknown neighbor cells
...
this fixes issue #1846 that appears to be related
to the enter/exit state for measurements that is kept
even after a cell disappears from the neighbor list
4 years ago
9866dcc10b
enb: disable qam256 configuration
...
disable qam256 altogether until underlying PHY/MAC support
is implemented
4 years ago
d53f69bf0a
- Initialize the log backend, otherwise no log entries are generated.
4 years ago
615af5cc4d
setting seed to constant in prach test
4 years ago
829dfc4e60
metrics_stdout: fix precision calculation for 100%
...
the precision for 100% was causing the default value of -1 which in turn
cause to print the full precision resulting in ugly stdout plots.
before:
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k100.000000% 0.0 0.0 0.0 0.0 0%
after:
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 100% 0.0 0.0 0.0 0.0 0%
4 years ago
e72219789e
ul_harq: don't clear payload buffer during HARQ reset
...
this fixes #1791 which was caused by a race between
the PHY workers preparing a new UL-SCH PDU and the Stack resetting
the MAC, which in turn resets the HARQ processeses, which cleared
the buffer and set the length to zero.
Not explicitly clearing the buffer on a HARQ reset seems to be
fine since the PHY worker clears the buffer before starting to
pack a new PDU anyway.
4 years ago
b08a586fd4
pdu: refactor error logging
...
just some refactoring of error messages when a PDU packing error occurs
4 years ago
49186e2b1f
Fix NCC set in HO command message for intra-enb handover
4 years ago
693d2f10b7
- Fix hex dumps newlines.
4 years ago
22a6dc305f
Moved common variables and functions from the usim and pcsc_usim classes into usim_base class.
4 years ago
8a917bdd06
fix RRC phy controller call to phy->set_config. Only the PCell was being configured
4 years ago
2e10c8e13d
bug fix - eNB was not allocating UL grants for an UE that has performed intra-enb handover. The problem resulted from the fact that the ue configuration in the scheduler not accounting for removed cells.
4 years ago
8a5a571045
bug fix - in case of intra-enb Handover, the eNB was not adding SCells in the HO command
4 years ago
4383796393
add scells in case of intra-enb handover
4 years ago
4ebe92f6a3
refactor phy configuration in the rrc to keep track of activated scells, and cells configurations
4 years ago
cfc77118d3
disable console print of scell activation command during handover
4 years ago
d910c910a4
rrc::meas_cell now uses stack timers instead of system timers.
4 years ago
49ad1a4312
added unit test for meas cells
4 years ago
023d32975a
avoid use of pointers to meas_cells in ho_proc as they may become dangling
4 years ago
072b7be582
renamed rrc::cell_t to rrc::meas_cell
4 years ago
d02e8135fb
metrics_stdout: reset n_reports var after writing intermediate table header
4 years ago
688dda30a4
favour carriers with best channel conditions for UL grants due to SRs
4 years ago
0ef8e1fdac
rrc: include pci when logging serving cell measurement
...
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell
15:49:11.357447 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS: New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
4 years ago
6e0abd30dd
ue,phy_common: include Pcell PCI in cell measurements
...
this allows easier plotting in RRC when PHY cell
measurements already include the PCI
4 years ago
baf171d446
rrc: improve SR configuration logging
...
* move logging of SR max attempts into MAC logging
* log new MAC config whenever it is updated
4 years ago
bf7c2b800e
proc_sr: log error when trying to enable faulty SR config
4 years ago
04acc78c7d
metrics_test: add neighbor cell test
...
cleanup test and add neighbor cells so the displaying is tested
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal-------------Neighbour--DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 8 -33 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 8 -33 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
4 years ago
ddbf4e1645
metrics_stdout: print new table header if neighbour cells change
...
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.
--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -66 61 -3.3k 1 -76 11 18 1.1 8.4M 3% 0.0 21 262 167k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.1 9.6M 2% 0.0 22 476 214k 0%
0 2 -65 60 -3.3k 1 -76 16 22 1.3 13M 3% 0.0 23 1.1k 734k 0%
0 2 -64 59 -3.3k 1 -76 17 23 1.3 15M 2% 0.0 23 602 424k 0%
0 2 -63 58 -3.3k 1 -77 20 25 1.4 19M 3% 0.0 23 501 304k 0%
0 2 -62 57 -3.3k 1 -77 22 27 1.8 20M 10% 0.0 22 417 418k 0%
0 2 -61 56 -3.3k 1 -77 24 28 1.8 25M 9% 0.0 23 396 439k 0%
0 2 -61 56 -3.3k 1 -77 26 29 1.5 23M 22% 0.0 23 841 407k 0%
0 2 -60 55 -3.3k 1 -77 27 31 1.3 27M 11% 0.0 23 890 1.1M 0%
0 2 -59 54 -3.3k 1 -77 27 32 1.00 30M 3% 0.0 23 583 524k 0%
0 2 -59 54 -3.3k 1 -77 27 32 0.92 32M 1% 0.0 23 1.1k 503k 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -59 54 -3.3k 27 31 1.1 30M 4% 0.0 23 1.2k 529k 0%
0 2 -60 55 -3.3k 27 30 1.4 25M 18% 0.0 23 540 442k 0%
0 2 -61 56 -3.3k 26 29 1.6 23M 21% 0.0 23 536 429k 0%
0 2 -62 57 -3.3k 24 28 1.8 23M 13% 0.0 23 834 456k 0%
0 2 -62 57 -3.3k 1 -78 21 26 1.6 20M 7% 0.0 23 723 425k 0%
0 2 -63 58 -3.3k 1 -76 17 22 1.1 15M 3% 0.0 23 470 267k 0%
0 2 -64 59 -3.3k 1 -77 17 22 1.3 15M 3% 0.0 23 167 280k 0%
0 2 -65 60 -3.3k 1 -76 14 21 1.3 11M 2% 0.0 22 57 223k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.2 9.0M 3% 0.0 21 135 182k 0%
0 2 -66 61 -3.4k 1 -70 9.3 17 1.0 6.9M 2% 0.0 21 246 126k 0%
0 2 -67 62 -3.3k 1 -75 8.2 16 1.1 4.9M 3% 0.0 20 0.0 122k 0%
4 years ago
2f0125ef4e
Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging.
4 years ago
137e554eb3
reestablish pdcp bearers is required in case of AM bearers
4 years ago
079ae70e64
- Fix logs entries having two newlines instead of one. The old log formatter will delegate this to the new one.
4 years ago
1f2cca8909
in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy
4 years ago
Andre Puschmann
Jan
Jan Remeš
Pedro Alvarez
Francisco Paisana
Xavier Arteaga
Francisco Paisana
faluco
yagoda