- Handle received E-RAB S1AP at s1ap.cc.
- Added methods to rrc.cc, rrc_ue.cc and rrc_bearer_cfg.cc to handle erab modify request.
- Made RLC add_bearer() function capable of re-creating the RLC entity.
- Send RRC reconfiguration to the UE and reply to the EPC with S1AP
modify bearer response.
This commit also adds support to srsEPC to send S1AP modify bearer request for
testing purposes.
when releasing PUCCH/SRS (see 5.3.13 in 36.331) we need to reset the SR config as well.
In our case, SR is handled by MAC so we need to (re-)configure MAC, not all of
MAC though, just SR.
this patch adds a check to drop all PDCP control PDUs
in order to prevent handling them as data PDUs.
This could happen when the size exceeded the arbitrary length check.
This should fix#1787
* Fix deadlock caused by update_measurements calling in_sync
* Fix overlapping SRS condition
* Do not use shortened PUSCH in transmissions and retx from RAR
* Revert "Fix deadlock caused by update_measurements calling in_sync"
This reverts commit f58c8c8c766f8f95baa3a3bf8287d8e25b2057ba.
* Make PHY non-blocking and fefactor HO procedure
* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers
Co-authored-by: Ismael Gomez <ismagom@gmail.com>
the Tx SDU has been set to 128 PDUs because this gives approx.
150kByte UL buffer state (max value for Rel 8 BSR).
Previously, however, we've always reported too much pending UL
data because we weren't subtracting the transmitted data from
the reported data.
with this newer BSR reporting, however, even with full buffers we would
never report full buffers because the queues size is too short.
This seems to cause issues for iperf TCP sessions not resulting
in full DL rate, see isse #1703. It seems that the TCP bandwitdh
probing works better with larger buffers (in our case this can
only be achieved with more PDUs in the pool).
This should fix#1703