a366500a78
rrc_proc: init cs_result to none
...
detected by Coverity CID 363053
4 years ago
665b3996bb
now the phy controller handles the scenario where the phy cell selection failed to be initialized
4 years ago
937067a205
proc_phr: rename start_periodic_timer() and make sure its only started if a valid config is present
4 years ago
fab86382c1
mac,rrc: add interface to set SR config explicitly without touching any other MAC function
...
when releasing PUCCH/SRS (see 5.3.13 in 36.331) we need to reset the SR config as well.
In our case, SR is handled by MAC so we need to (re-)configure MAC, not all of
MAC though, just SR.
4 years ago
e7239163e9
silence noisy unhandled in_sync_ev logs
4 years ago
f185272367
added comments explaining the meaning of the cell reselection procedures
4 years ago
49e7b8e36e
- Change periodicity of cell reselection after a new serving cell has been selected
...
- Enable PHY intra measurements during RRC_IDLE
4 years ago
585d7c923a
refactor and simplification of cell selection procedure. Using now a SIB3 threshold to decide whether to select neighbor cell while in RRC_IDLE
4 years ago
5a4e71a6e4
Created k_enb_context structure that holds k_enb, NCC and NH to make it easier to restore context from failed handover.
4 years ago
bcb422736c
Save and restore NH on handover and handover failure.
4 years ago
3eb525563a
Fix issue reading MNC length in USIM.
4 years ago
6ae47b6510
SRSUE: Deafult PUCCH/SRS does not imply full PHY dedicated defaults
4 years ago
22a6dc305f
Moved common variables and functions from the usim and pcsc_usim classes into usim_base class.
4 years ago
4ebe92f6a3
refactor phy configuration in the rrc to keep track of activated scells, and cells configurations
4 years ago
d910c910a4
rrc::meas_cell now uses stack timers instead of system timers.
4 years ago
023d32975a
avoid use of pointers to meas_cells in ho_proc as they may become dangling
4 years ago
072b7be582
renamed rrc::cell_t to rrc::meas_cell
4 years ago
0ef8e1fdac
rrc: include pci when logging serving cell measurement
...
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell
15:49:11.357447 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS: New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
4 years ago
ddbf4e1645
metrics_stdout: print new table header if neighbour cells change
...
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.
--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -66 61 -3.3k 1 -76 11 18 1.1 8.4M 3% 0.0 21 262 167k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.1 9.6M 2% 0.0 22 476 214k 0%
0 2 -65 60 -3.3k 1 -76 16 22 1.3 13M 3% 0.0 23 1.1k 734k 0%
0 2 -64 59 -3.3k 1 -76 17 23 1.3 15M 2% 0.0 23 602 424k 0%
0 2 -63 58 -3.3k 1 -77 20 25 1.4 19M 3% 0.0 23 501 304k 0%
0 2 -62 57 -3.3k 1 -77 22 27 1.8 20M 10% 0.0 22 417 418k 0%
0 2 -61 56 -3.3k 1 -77 24 28 1.8 25M 9% 0.0 23 396 439k 0%
0 2 -61 56 -3.3k 1 -77 26 29 1.5 23M 22% 0.0 23 841 407k 0%
0 2 -60 55 -3.3k 1 -77 27 31 1.3 27M 11% 0.0 23 890 1.1M 0%
0 2 -59 54 -3.3k 1 -77 27 32 1.00 30M 3% 0.0 23 583 524k 0%
0 2 -59 54 -3.3k 1 -77 27 32 0.92 32M 1% 0.0 23 1.1k 503k 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -59 54 -3.3k 27 31 1.1 30M 4% 0.0 23 1.2k 529k 0%
0 2 -60 55 -3.3k 27 30 1.4 25M 18% 0.0 23 540 442k 0%
0 2 -61 56 -3.3k 26 29 1.6 23M 21% 0.0 23 536 429k 0%
0 2 -62 57 -3.3k 24 28 1.8 23M 13% 0.0 23 834 456k 0%
0 2 -62 57 -3.3k 1 -78 21 26 1.6 20M 7% 0.0 23 723 425k 0%
0 2 -63 58 -3.3k 1 -76 17 22 1.1 15M 3% 0.0 23 470 267k 0%
0 2 -64 59 -3.3k 1 -77 17 22 1.3 15M 3% 0.0 23 167 280k 0%
0 2 -65 60 -3.3k 1 -76 14 21 1.3 11M 2% 0.0 22 57 223k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.2 9.0M 3% 0.0 21 135 182k 0%
0 2 -66 61 -3.4k 1 -70 9.3 17 1.0 6.9M 2% 0.0 21 246 126k 0%
0 2 -67 62 -3.3k 1 -75 8.2 16 1.1 4.9M 3% 0.0 20 0.0 122k 0%
4 years ago
2f0125ef4e
Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging.
4 years ago
1f2cca8909
in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy
4 years ago
c6f4776a6f
send the nassdus sooner in the rrc reconf procedure
4 years ago
fc49b5a030
implemented rrc reconfiguration procedure that includes a continuation when phy configuration is complete
4 years ago
b3eb9651d6
disable cqi in scells during handover procedure
4 years ago
8a9a95a937
ensure sibs are acquired if cell selection calls cell search
4 years ago
045f647914
fix edge case where serving cell is good enough for reestablishment but the sibs are not yet acquired
4 years ago
5ecbe8fb17
cleanup of the reestablishment procedure state machine. It does not need to wait for the serving cell configuration because such procedure is already included in the cell selection procedure
4 years ago
b3bfe336a9
Make sure that remote address test has a ip mask
4 years ago
5783c01cbb
tf_packet_filter: Improve support for the different filter types
4 years ago
0997daa7a0
now the handover procedure in the srsUE does not wait for the phy cell selection result. It only waits for the RA result
4 years ago
c75c463263
Use SNR instead of SINR for RLF threshold ( #1769 )
...
* Use SNR instead of SINR for RLF threshold
* Send in/out-sync only for cc_idx=0
4 years ago
86f4d469c6
Added some functions to save and restore AS keys for the case of failed handover in the USIM
4 years ago
b94d24ed98
Take into account CRS from neigbhour cells when measuring interference ( #1757 )
...
* Take into account CRS from neigbhour cells when measuring interference
* fix std::isnormal compilation
* Fixed compilation of test
* Address comments
* Remove unused overrides
4 years ago
cf89d6645b
add comments explaining each function of the reest procedure
4 years ago
d068d594af
implemented rrc reestablishment procedure part after sending reest request
4 years ago
73e21daeb2
refactor reestablishment procedure to more closely follow TS.
4 years ago
1afc137032
[REBASE] Make PHY non-blocking and fefactor HO procedure ( #1753 )
...
* Make PHY non-blocking and fefactor HO procedure
* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers
Co-authored-by: Ismael Gomez <ismagom@gmail.com>
4 years ago
7f8af023b8
added a callback that always gets triggered when the phy cell selection completes. This callback checks if cell selection failed, and if so, sets the rsrp of the selected cell to -infinity
4 years ago
5968157ea5
Protect better the access to shared variables in phy_common and metrics ( #1750 )
4 years ago
5acc1c9a73
- Cleaned up style in the PRACH class:
...
* Removed magic numbers.
* Reduced indentation of statements with early exists.
* Removed elses after a return statement.
* Trimmed unnecessary include files.
* Default initialized members in the class.
4 years ago
79f5b62551
- Calculate PRACH buffers on the fly when required instead of pregenerating all of them.
4 years ago
b616944a13
ue,rrc: fix security config during HO/reestablishment
...
we fix a number of very related issues for HO/reestablishment
in the success/error case:
* this patch removes the hard-coded check that intra-cell HO aren't
allowed. There are cases where eNBs use this method to update
the security context.
* the patch also fixes an issue after failed HO where the security context
of the source eNB should be used for the reestablishment.
* update security keys according to specs when mobilitycontrol
indicated change of key
4 years ago
6827c2df21
rrc_meas: disable layer3 filtering until quantity config is received
...
the filter alpha was initialized to zero by default which causes an
issue because the first measurement for a cell can't be updated,
because the filtering function will always return the current value.
According to 36.331 Sec 5.5.3.2 Note 2, a k-value of 0 should turn
off filtering, which should be used as the default value until
an update is received from the network.
4 years ago
5e8a4c898d
Bring back the circular array object. ( #1712 )
4 years ago
52355024e7
SRSUE PHY: move mutex lock to cc worker and unlock for stack calls
4 years ago
f49fbd6d02
Fix the order of HO/reest measurement actions ( #1696 )
4 years ago
aec18a93d1
mux,bsr: refactor UL buffer status reporting
...
this patch fixes the UL BSR as per TS 36.321, it includes following
main changes:
* report UL buffer state to reflect the UEs transmit buffer after
the MAC UL PDU containing the BSR has been built.
In other words, if the UE, for example, can transmit all outstanding
data in an UL grant, it will not report any pending data to transmit.
* refactor MUX routines and subheader space calculation
4 years ago
06a5bdaab2
Process all calls to RLF in the main RRC task
4 years ago
92221eb780
update of rrc_interface_mac to remove signal from mac to rrc that RA failed in case of handover failure
4 years ago
fca1273b3e
avoid spurious warnings of trying to start the PRACH when it is already running during handover
4 years ago
Andre Puschmann
Francisco Paisana
Pedro Alvarez
Xavier Arteaga
Sylvain Munaut
Ismael Gomez
faluco
faluco