- abstract UE object now consists of a radio, a PHY, and a stack layer
- add new stack abstraction layer that combines MAC, RLC, RRC, PDCP, NAS and GW
- PHY layer now has a single stack interface and does not talk to MAC and RRC seperatly
- implements a cross-correlation that takes the complex conjugate
of one of the input signals (filter)
- the fft of this input signal is only computed once
this has been detected by valgrind+gcc on Ubuntu 16.04 but
isn't an issue for more recent versions. Not sure if that is because
of an issue in older libc and there memcpy implementation or a
bug in valgrind, or both.
In any case, overlapping memcpy may cause undefined behaviour so
it seems ok to only copy the symbols that do not contain the
DMRS, i.e. not symbol 3 in each slot.
- there was an issue in the stack allocation of the large
m2ap pdu struct that was fixed by heap-allocating it
- there was also an issue in the m2ap packing that used
a temporary struct that was not initialized
write_sdu and write_pdu are not re-entrant because all functions
that deal with the counters, e.g. integrity check and generate,
must be protected because MAC threads may call them at the same time.
this addresses issue #254
* Starting to add EIA1 tests.
* Initial tests for EIA1
* Bit shifted bearer by 27. Test case 1 and 4 are passing now.
* Adding EIA test case 7.
* Making sure the test is called.
* Fixed double initialization of msg_len_bits.
* Starting to add M2AP serialization structures.
* Added M2AP procedure ids.
* Added some M2AP max values.
* Removing m2ap.cc for now.
* Adding cause IE.
* Adding dummy m2ap.cc to check correct compilation of m2ap.h
* Fixed compilation issues in m2ap.h
* Adding Cell Information IE.
* Added Criticality diagnostics IE.
* Adding eNB-MBMS-ConfigurationDataItem.
* Adding MBMS-Service-Area-Id-List
* Added MBMS Service Area Id.
* Added Global eNB Id IE.
* Added Global MCE id IE.
* Added MBMS-Service-associatedLogicalM2-ConnectionItem IE.
* Added MBSFN_SUBFRAME_CONFIGURATION IE
* Added MCCHrelatedBCCH-ConfigPerMBSFNArea IE.
* Added MCH scheduling period IE.
* Added PMCH-Configuration IE.
* Added Time-to-Wait IE.
* Added TNL-Information IE.
* Starting to add M2SetupRequest msg.
* Adding M2 Setup Request message.
* Fixed up enums related to initiating messages, successful outcome and unscesseful outcome.
* Starting to add m2ap apck/unpack PDU functions.
* Started to add a test for M2 Setup Request Pack/Unpack.
* Filling in M2SetupRequest structure.
* Adding packing of more IEs in the M2SetupRequest.
* Starting to add unpacking functions to M2SetupRequest.
* Continuing to unpack M2SetupRequest. Unpacking PLMN Identity correctly now.
* Fixed up enb_id unpacking. eNB Id and eNB name unpacking correctly now.
* Starting to add unpacking for dataconfiguration item.
* Adding support for eCGI unpacking.
* Adding MBSFN Synchronization Area id Unpacking.
* Adding service area unpacking.
* Added unpacking functionality to the rest of the IEs in the M2 Setup Request. Unpacking the M2 Setup Request is passing unit test.
* Fized mistake in packing eNB Id. Starting to add packing to eCGI.
* Starting to pack value in ENB MBMS Configuration item.
* Fixed packing of ENB MBMS configuration item header.
* Packing of M2 Setup request is now passing the unit test.
* Starting to add M2setup response.
* Starting to add packing/unpacking succeful outcome.
* Starting to add M2SetupResponse to test.
* Continue to add testing to setup response. Choice type seems OK.
* Starting to add unpacking to MCE Id.
* Adding MCEname packing/unpacking.
* Continue to unpack m2setupresponse.
* Adding MBMS Area Id unpacking
* Added pddch length unpacking.
* Adding more IE unpacking.
* Adding more code to unpack M2 Setup response.
* Added M2 Setup response unpacking.
* Added M2 response packing. Fixed mistake on eCGI packing/unpacking, which broke M2 Setup request.
* M2 setup request and response pack and unpacking seems to work.
* Starting to add MBMS Session Start Request.
* Continue to unpack MBMS session start request.
* Added TMGI unpacking.
* Continue to add unpacking to MBMS session start request
* Starting to add TNL Information unpacking
* Added unpack for MBMS session start request.
* Strating to add MBMS session start request packing.
* Adding MCE MBMS M2AP Id packing.
* Added MBMS Session Start Reqeust pack and unpack.
* Added MBMS Session start response packing/unpacking.
* Starting to add unpacking of MBMS Scheduling information.
* Adding MCCH Update time Unpacking.
* Adding MBSFN Area Configuration List Unpacking.
* Starting to add unpack PMCH configuration Item.
* Adding AllocatedSubframesEnd unpack
* Fixed multiple mistakes in unpacking PMCH configuration.
* Unpacking MCH Scheduling Period
* Continue to unpack MBMS Session List Per PMCH Item.
* Added unpacking of PMCH Configuration List. Starting to add unpacking of MBSFN Subframe Configuration List.
* Adding radioframe allocation period and offset unpacking.
* Added unpacking of MBMS Scheduling Information (needs testing.)
* Added more testing to MBMS Scheduling Info.
* Small commit.
* Added more testing to the unpacking of MBMS Scheduling Information. Unpacking correctly now.
* Continue to pack MBMS Scheduling information. Packing PMCH Configuration.
* Fixed mistach in packing PMCH configuration list.
* Adding more packing to MBMS scheduling info message.
* Fixed more mistakes in MBMS Scheduling information packing. Passing tests now.
* Added MBMS Scheduling Information Response.
* Remove debug prints.
- add a simple and low-overhead has_data() method to check whether
an RLC entity has data to transmit or not
- use this method for all calls that are actually not interested
in the amount of data to send
- use the more expensive get_buffer_state() for all cases where
the actual size of the buffer is of importance
- this remove RF calibration parameters that were an extra
section in the eNB/UE config but were hardly used (only old bladeRF)
- a better way to pass those parameter would be through the
device args in the normal rf config section
* Assign correct values from BladeRf manual calibration to correction
The rf_calibration function for blade RF was assgiing dc_gain to
BLADERF_CORR_FPGA_PHASE and dc_phase to BLADERF_CORR_FPGA_GAIN. This hot
fix corrects the value assignments in both rf_blade_set_tx_cal and
rf_blade_set_rx_cal functions.
* Fix ARM NEON code compilation
Fix LV_HAVE_NEON defintion incorrecly used instead of HAVE_NEON in some places
Replace vqabsq_s32 with vabsq_f32 as vqabsq_s32 requires int type (fails to compile)
Fix missing NEON code path in mat.h in srslte_mat_2x2_mmse_csi_simd()
* Fix timestamp overflow issue on 32-bit systems with Soapy driver
'time_t secs' can be 32-bit on some systems. This causes calculation:
'secs * 1000000000;' to overflow.
* New parallel Turbodecoder implementation in SSE/AVX 16-bit and 8-bit
* Optimised UL Interleaver
* Include TB CRC calculation in FEC encoder
* New threading priorities