22a6dc305f
Moved common variables and functions from the usim and pcsc_usim classes into usim_base class.
4 years ago
8a917bdd06
fix RRC phy controller call to phy->set_config. Only the PCell was being configured
4 years ago
4ebe92f6a3
refactor phy configuration in the rrc to keep track of activated scells, and cells configurations
4 years ago
cfc77118d3
disable console print of scell activation command during handover
4 years ago
d910c910a4
rrc::meas_cell now uses stack timers instead of system timers.
4 years ago
023d32975a
avoid use of pointers to meas_cells in ho_proc as they may become dangling
4 years ago
072b7be582
renamed rrc::cell_t to rrc::meas_cell
4 years ago
d02e8135fb
metrics_stdout: reset n_reports var after writing intermediate table header
4 years ago
0ef8e1fdac
rrc: include pci when logging serving cell measurement
...
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell
15:49:11.357447 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS: New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
4 years ago
6e0abd30dd
ue,phy_common: include Pcell PCI in cell measurements
...
this allows easier plotting in RRC when PHY cell
measurements already include the PCI
4 years ago
baf171d446
rrc: improve SR configuration logging
...
* move logging of SR max attempts into MAC logging
* log new MAC config whenever it is updated
4 years ago
bf7c2b800e
proc_sr: log error when trying to enable faulty SR config
4 years ago
ddbf4e1645
metrics_stdout: print new table header if neighbour cells change
...
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.
--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -66 61 -3.3k 1 -76 11 18 1.1 8.4M 3% 0.0 21 262 167k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.1 9.6M 2% 0.0 22 476 214k 0%
0 2 -65 60 -3.3k 1 -76 16 22 1.3 13M 3% 0.0 23 1.1k 734k 0%
0 2 -64 59 -3.3k 1 -76 17 23 1.3 15M 2% 0.0 23 602 424k 0%
0 2 -63 58 -3.3k 1 -77 20 25 1.4 19M 3% 0.0 23 501 304k 0%
0 2 -62 57 -3.3k 1 -77 22 27 1.8 20M 10% 0.0 22 417 418k 0%
0 2 -61 56 -3.3k 1 -77 24 28 1.8 25M 9% 0.0 23 396 439k 0%
0 2 -61 56 -3.3k 1 -77 26 29 1.5 23M 22% 0.0 23 841 407k 0%
0 2 -60 55 -3.3k 1 -77 27 31 1.3 27M 11% 0.0 23 890 1.1M 0%
0 2 -59 54 -3.3k 1 -77 27 32 1.00 30M 3% 0.0 23 583 524k 0%
0 2 -59 54 -3.3k 1 -77 27 32 0.92 32M 1% 0.0 23 1.1k 503k 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -59 54 -3.3k 27 31 1.1 30M 4% 0.0 23 1.2k 529k 0%
0 2 -60 55 -3.3k 27 30 1.4 25M 18% 0.0 23 540 442k 0%
0 2 -61 56 -3.3k 26 29 1.6 23M 21% 0.0 23 536 429k 0%
0 2 -62 57 -3.3k 24 28 1.8 23M 13% 0.0 23 834 456k 0%
0 2 -62 57 -3.3k 1 -78 21 26 1.6 20M 7% 0.0 23 723 425k 0%
0 2 -63 58 -3.3k 1 -76 17 22 1.1 15M 3% 0.0 23 470 267k 0%
0 2 -64 59 -3.3k 1 -77 17 22 1.3 15M 3% 0.0 23 167 280k 0%
0 2 -65 60 -3.3k 1 -76 14 21 1.3 11M 2% 0.0 22 57 223k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.2 9.0M 3% 0.0 21 135 182k 0%
0 2 -66 61 -3.4k 1 -70 9.3 17 1.0 6.9M 2% 0.0 21 246 126k 0%
0 2 -67 62 -3.3k 1 -75 8.2 16 1.1 4.9M 3% 0.0 20 0.0 122k 0%
4 years ago
2f0125ef4e
Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging.
4 years ago
1f2cca8909
in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy
4 years ago
edd5c50f9a
pass nas pdus after sending rrc reconf complete
4 years ago
c6f4776a6f
send the nassdus sooner in the rrc reconf procedure
4 years ago
fc49b5a030
implemented rrc reconfiguration procedure that includes a continuation when phy configuration is complete
4 years ago
5a9b1865e4
proc_bsr: fix typo
4 years ago
ef9d77c966
SRSUE: add PRACH config present field in PHY configuration structure
4 years ago
924cc4f937
during cell selection, if the serving cell is ok, avoid calling serving cell configuration if the sibs are already acquired
4 years ago
4e88daae21
Set DCI unpacking errors to info ( #1781 )
4 years ago
dfeed52514
- Rename out_stream function to console.
4 years ago
62faef7c71
- Replaced all uses of the log::console method.
4 years ago
b3eb9651d6
disable cqi in scells during handover procedure
4 years ago
f4c7021a5f
Appy phy configuration to current_phy_cfg before sending to PHY after HO
4 years ago
8a9a95a937
ensure sibs are acquired if cell selection calls cell search
4 years ago
af3ff5985e
removal of console print of last selected cell during the cell selection procedure.
4 years ago
c33e94fede
fix conformace 8_5_1_1 failure
4 years ago
045f647914
fix edge case where serving cell is good enough for reestablishment but the sibs are not yet acquired
4 years ago
d671e39c93
Fix SINR not correctly considering noise. Missed dBm conversion
4 years ago
5ecbe8fb17
cleanup of the reestablishment procedure state machine. It does not need to wait for the serving cell configuration because such procedure is already included in the cell selection procedure
4 years ago
5783c01cbb
tf_packet_filter: Improve support for the different filter types
4 years ago
bb691f0cbe
Fix priority order in BSR trigger. Was not being triggered if SRB2 data was pending in the buffer ( #1771 )
4 years ago
8c30822350
Fix bug in update_measurements() not reporting in_sync in single carrier
4 years ago
0997daa7a0
now the handover procedure in the srsUE does not wait for the phy cell selection result. It only waits for the RA result
4 years ago
c75c463263
Use SNR instead of SINR for RLF threshold ( #1769 )
...
* Use SNR instead of SINR for RLF threshold
* Send in/out-sync only for cc_idx=0
4 years ago
76bfc78147
Fix issues with Sounding-RS ( #1761 )
...
* Fix deadlock caused by update_measurements calling in_sync
* Fix overlapping SRS condition
* Do not use shortened PUSCH in transmissions and retx from RAR
* Revert "Fix deadlock caused by update_measurements calling in_sync"
This reverts commit f58c8c8c766f8f95baa3a3bf8287d8e25b2057ba.
4 years ago
2d321231df
fix reest proc. The reest proc state has to be set before launching the procedure, because the procedure can complete immediately on launch call
4 years ago
86f4d469c6
Added some functions to save and restore AS keys for the case of failed handover in the USIM
4 years ago
81ab4c1a65
make sure ho procedure waits for t304 expiry in all cases
4 years ago
b94d24ed98
Take into account CRS from neigbhour cells when measuring interference ( #1757 )
...
* Take into account CRS from neigbhour cells when measuring interference
* fix std::isnormal compilation
* Fixed compilation of test
* Address comments
* Remove unused overrides
4 years ago
d068d594af
implemented rrc reestablishment procedure part after sending reest request
4 years ago
7d6c9a1751
Add cause and cell pci to reestablishment console message
4 years ago
73e21daeb2
refactor reestablishment procedure to more closely follow TS.
4 years ago
1afc137032
[REBASE] Make PHY non-blocking and fefactor HO procedure ( #1753 )
...
* Make PHY non-blocking and fefactor HO procedure
* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers
Co-authored-by: Ismael Gomez <ismagom@gmail.com>
4 years ago
399b986d0b
Fix deadlock caused by update_measurements calling in_sync ( #1760 )
4 years ago
eb370642ab
verify cell selection observer is set before calling it
4 years ago
7f8af023b8
added a callback that always gets triggered when the phy cell selection completes. This callback checks if cell selection failed, and if so, sets the rsrp of the selected cell to -infinity
4 years ago
f0d651ae8e
- Fixed a leak in the MME class not releasing the static byte buffer pool.
...
- Now the pool gets destroyed on program exit using a unique_ptr.
- Removed manual cleanup() calls in all the code base to free the pool instance.
4 years ago
Pedro Alvarez
Francisco Paisana
Andre Puschmann
Xavier Arteaga
Ismael Gomez
faluco
Sylvain Munaut