704 Commits (159a3d84bd58dc5b8257e706f53df966b2cdf39a)

Author SHA1 Message Date
Xavier Arteaga d5d3594f49 Removed unused attribute 4 years ago
Xavier Arteaga f9643843a0 SRSENB/UE Fixed NR workers 4 years ago
Xavier Arteaga ac930003be SRSUE: Integrated NR workers 4 years ago
Xavier Arteaga a908fb6c5b Fix NR srsue/srsenb. Initial PHY NR in SRSENB. 4 years ago
Xavier Arteaga 2b2db90933 SRSUE: initial NR workers 4 years ago
Xavier Arteaga eed9405e40 Moved NR MAX MIMO layers to carrier 4 years ago
Xavier Arteaga c6798653be SRSUE: created initial PHY LTE worker pool 4 years ago
Andre Puschmann 07d2bc4fe8 change license header to agnostic version with hint to root LICENSE file 4 years ago
Xavier Arteaga 53d8319d2b SRSUE: protect secondary serving cell synch from concurrent access 4 years ago
Xavier Arteaga 287e651ef1 SRSUE: Protect nullptr buffer in secondary serving cell synch 4 years ago
Xavier Arteaga 959f37ae81 SRSUE: Renamed PHY scell_state to cell_state 4 years ago
Xavier Arteaga 4b8cd7ce92 SRSUE: protect scell state 4 years ago
Xavier Arteaga c5cb4d9984 SRSUE: Added time accurate SCell activation 4 years ago
Xavier Arteaga f64c268a69 SRSUE: Refactored MAC/RRC SCell Activation/Deactivation 4 years ago
Pedro Alvarez 454162cea7 Deleted nas_interface_stack. 4 years ago
Pedro Alvarez 604e79214d Changed NAS is_attached interface to is_registered. 4 years ago
Pedro Alvarez 5649ecaab0 Renamed nas_common.h to nas_config.h. Moved emm_state_t into nas_emm_state.h and nas_emm_state.cc. 4 years ago
Pedro Alvarez 96f39da5d7 Fixes for airplane simulator. 4 years ago
Pedro Alvarez 14844a168a Created new class to hold all NAS states for the NAS state machine. Added EMM-DEREGISTERED substates and EMM-REGISTERED substates.
Decoupled PLMN selection, attach request and service request. Removed RRC connect procedure from NAS.
4 years ago
Andre Puschmann 2be85217fd mac,ue: reset demux when restting MAC
this potentially fixes the issue we see during HO and RLF
under high DL load.

The issue happens because buffered DL PDUs are delivered to
RLC after reestablishing RLC that confuse the receiving
RLC entity bc the sequence numbers are very high, as opposed
to begin with zero again after reestablishment.
4 years ago
Andre Puschmann 7cf919e2af Fix MAC PDU packing after sending Truncated BSR (#2004)
* mac_test: add extended TBSR unit test

unit test to MAC UL packing after sending a TBSR

this fixes the MAC issues described in issue #2002

* mux: fix updating of LCG buffer state after packing PDU

we've previously lowered the buffer state of the LCG according
to the bytes that have been scheduled, but not according to
those that have been actually included in the PDU.

* proc_bsr: fix LCG buffer state updating for TBSR

when sending a TBSR do not update the internal buffer
state of the BSR proc.

This caused issues because the buffer state for all LCG that
are not included in the TBSR are set to zero, although at least
one LCG does have data to transmit.

* rlc_am: include LCID when logging retx of SN
4 years ago
Francisco Paisana 510959b50f update nr asn1 files, and asn1 tests 4 years ago
Andre Puschmann 082e002b67 nas: fix airplane mode simulation
the current implementation was somehow broken after a
NAS refactor. It was undetected because we didn't really
use it.

this fixes the simulation by using a single timer to simulate
airplane mode transitions.
the timer is rearmed in the timer_expire() function
if the correspondig event is set.

Has been tested to work well with, e.g.:

--sim.airplane_t_on_ms 5000 --sim.airplane_t_off_ms 10000
4 years ago
Xavier Arteaga 32ea840a30 INTRA: better ring-buffer protection 4 years ago
Xavier Arteaga 369cffec00 More deterministic SCell search test 4 years ago
Andre Puschmann fd5cde525c proc_bsr: fix race condition in BSR reporting
fix for #1934

This fixes a race condition between Stack thread and DL
PDU processing that lead to updates of the RLC buffer that
are undetected by the BSR routine.

What happens is that in a UL SCH PDU all outstanding data is transmitted
and and a LBSR with all zero buffers is sent.

14:39:47.327301 [MAC ] [D] [ 3793] BSR:   LCID=3 old_buffer=59
14:39:47.330600 [MAC ] [I] [ 3793] UL LCID=3 len=58 LBSR: b=0 0 0 0

Note that "old_buffer" isn't set to zero here.

At the same time (same TTI), the MAC PDU processing thread handles DL-SCH PDUs
that may generate new UL PDUs:

14:39:47.330749 [RLC ] [I] DRB1 Tx SDU (54 B, tx_sdu_queue_len=1)
14:39:47.330762 [RLC ] [I] DRB1 Tx SDU (54 B, tx_sdu_queue_len=2)
14:39:47.330775 [RLC ] [I] DRB1 Tx SDU (54 B, tx_sdu_queue_len=3)
..

Those PDUs are "new data" since the previous buffer state was zero.

Here is the race now between the threads, at the end of the bsr::step() function
old_buffer of each LCG is updated with the previous new_buffer, so
the buffer state of LCG=2 is now 59.

Now MAC starts the next TTI:

14:39:47.331910 [MAC ] [D] [ 3794] Running MAC tti=3794
14:39:47.331928 [MAC ] [D] [ 3794] Update Bj: lcid=0, Bj=0
14:39:47.331934 [MAC ] [D] [ 3794] Update Bj: lcid=1, Bj=0
14:39:47.331938 [MAC ] [D] [ 3794] Update Bj: lcid=2, Bj=0
14:39:47.331941 [MAC ] [D] [ 3794] Update Bj: lcid=3, Bj=-1752
14:39:47.331951 [MAC ] [D] [ 3794] BSR:   LCID=0 update new buffer=0
14:39:47.331960 [MAC ] [D] [ 3794] BSR:   LCID=1 update new buffer=0
14:39:47.331964 [MAC ] [D] [ 3794] BSR:   LCID=2 update new buffer=0
14:39:47.331971 [MAC ] [D] [ 3794] BSR:   LCID=3 update new buffer=335
14:39:47.331976 [MAC ] [D] [ 3794] BSR:    check_new_data() -> get_buffer_state_lcg(0)=0
14:39:47.331980 [MAC ] [D] [ 3794] BSR:    check_new_data() -> get_buffer_state_lcg(1)=0
14:39:47.331984 [MAC ] [D] [ 3794] BSR:    check_new_data() -> get_buffer_state_lcg(2)=59
14:39:47.331988 [MAC ] [D] [ 3794] BSR:    check_new_data() -> get_buffer_state_lcg(3)=0
14:39:47.331993 [MAC ] [D] [ 3794] BSR:   LCID=0 old_buffer=0
14:39:47.332000 [MAC ] [D] [ 3794] BSR:   LCID=1 old_buffer=0
14:39:47.332003 [MAC ] [D] [ 3794] BSR:   LCID=2 old_buffer=0
14:39:47.332007 [MAC ] [D] [ 3794] BSR:   LCID=3 old_buffer=335

And since the buffer state of LCG=2 isn't zero, the new data for LCID=3 of that LCG is considered.
So effectivly, the BSR missed the "empty" buffer state for a fraction of time and doesn't
consider the outgoing data generated in the same TTI as new. It therefore
doesn't transmit a BSR.

in which a BSR wasn't
4 years ago
Andre Puschmann d5286e70aa proc_bsr: refactor and add extra print_state() method
allows to call the print_state() routine from other places in the BSR
4 years ago
Francisco Paisana 514deaf25b fix resetting of phy and mac during reestablishment 4 years ago
Andre Puschmann a366500a78 rrc_proc: init cs_result to none
detected by Coverity CID 363053
4 years ago
Francisco Paisana 665b3996bb now the phy controller handles the scenario where the phy cell selection failed to be initialized 4 years ago
Andre Puschmann 937067a205 proc_phr: rename start_periodic_timer() and make sure its only started if a valid config is present 4 years ago
Andre Puschmann fab86382c1 mac,rrc: add interface to set SR config explicitly without touching any other MAC function
when releasing PUCCH/SRS (see 5.3.13 in 36.331) we need to reset the SR config as well.
In our case, SR is handled by MAC so we need to (re-)configure MAC, not all of
MAC though, just SR.
4 years ago
Francisco Paisana e7239163e9 silence noisy unhandled in_sync_ev logs 4 years ago
Francisco Paisana f185272367 added comments explaining the meaning of the cell reselection procedures 4 years ago
Francisco Paisana 49e7b8e36e - Change periodicity of cell reselection after a new serving cell has been selected
- Enable PHY intra measurements during RRC_IDLE
4 years ago
Francisco Paisana 585d7c923a refactor and simplification of cell selection procedure. Using now a SIB3 threshold to decide whether to select neighbor cell while in RRC_IDLE 4 years ago
Pedro Alvarez 5a4e71a6e4 Created k_enb_context structure that holds k_enb, NCC and NH to make it easier to restore context from failed handover. 4 years ago
Pedro Alvarez bcb422736c Save and restore NH on handover and handover failure. 4 years ago
Pedro Alvarez 3eb525563a Fix issue reading MNC length in USIM. 4 years ago
Xavier Arteaga 6ae47b6510 SRSUE: Deafult PUCCH/SRS does not imply full PHY dedicated defaults 4 years ago
Pedro Alvarez 22a6dc305f Moved common variables and functions from the usim and pcsc_usim classes into usim_base class. 4 years ago
Francisco Paisana 4ebe92f6a3 refactor phy configuration in the rrc to keep track of activated scells, and cells configurations 4 years ago
Francisco Paisana d910c910a4 rrc::meas_cell now uses stack timers instead of system timers. 4 years ago
Francisco Paisana 023d32975a avoid use of pointers to meas_cells in ho_proc as they may become dangling 4 years ago
Francisco Paisana 072b7be582 renamed rrc::cell_t to rrc::meas_cell 4 years ago
Andre Puschmann 0ef8e1fdac rrc: include pci when logging serving cell measurement
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell

15:49:11.357447 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS:  New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS:  New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
4 years ago
Andre Puschmann ddbf4e1645 metrics_stdout: print new table header if neighbour cells change
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.

--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci  rsrp    pl    cfo  pci  rsrp  mcs   snr turbo  brate   bler   ta_us  mcs   buff  brate   bler
 0   2   -66    61  -3.3k   1   -76    11    18   1.1   8.4M     3%   0.0    21    262   167k     0%
 0   2   -65    60  -3.3k   1   -76    12    19   1.1   9.6M     2%   0.0    22    476   214k     0%
 0   2   -65    60  -3.3k   1   -76    16    22   1.3    13M     3%   0.0    23   1.1k   734k     0%
 0   2   -64    59  -3.3k   1   -76    17    23   1.3    15M     2%   0.0    23    602   424k     0%
 0   2   -63    58  -3.3k   1   -77    20    25   1.4    19M     3%   0.0    23    501   304k     0%
 0   2   -62    57  -3.3k   1   -77    22    27   1.8    20M    10%   0.0    22    417   418k     0%
 0   2   -61    56  -3.3k   1   -77    24    28   1.8    25M     9%   0.0    23    396   439k     0%
 0   2   -61    56  -3.3k   1   -77    26    29   1.5    23M    22%   0.0    23    841   407k     0%
 0   2   -60    55  -3.3k   1   -77    27    31   1.3    27M    11%   0.0    23    890   1.1M     0%
 0   2   -59    54  -3.3k   1   -77    27    32  1.00    30M     3%   0.0    23    583   524k     0%
 0   2   -59    54  -3.3k   1   -77    27    32  0.92    32M     1%   0.0    23   1.1k   503k     0%

--------Signal--------------DL-------------------------------------UL----------------------
cc pci  rsrp    pl    cfo   mcs   snr turbo  brate   bler   ta_us  mcs   buff  brate   bler
 0   2   -59    54  -3.3k    27    31   1.1    30M     4%   0.0    23   1.2k   529k     0%
 0   2   -60    55  -3.3k    27    30   1.4    25M    18%   0.0    23    540   442k     0%
 0   2   -61    56  -3.3k    26    29   1.6    23M    21%   0.0    23    536   429k     0%
 0   2   -62    57  -3.3k    24    28   1.8    23M    13%   0.0    23    834   456k     0%
 0   2   -62    57  -3.3k   1   -78    21    26   1.6    20M     7%   0.0    23    723   425k     0%
 0   2   -63    58  -3.3k   1   -76    17    22   1.1    15M     3%   0.0    23    470   267k     0%
 0   2   -64    59  -3.3k   1   -77    17    22   1.3    15M     3%   0.0    23    167   280k     0%
 0   2   -65    60  -3.3k   1   -76    14    21   1.3    11M     2%   0.0    22     57   223k     0%
 0   2   -65    60  -3.3k   1   -76    12    19   1.2   9.0M     3%   0.0    21    135   182k     0%
 0   2   -66    61  -3.4k   1   -70   9.3    17   1.0   6.9M     2%   0.0    21    246   126k     0%
 0   2   -67    62  -3.3k   1   -75   8.2    16   1.1   4.9M     3%   0.0    20    0.0   122k     0%
4 years ago
Pedro Alvarez 2f0125ef4e Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging. 4 years ago
Francisco Paisana 1f2cca8909 in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy 4 years ago
Francisco Paisana c6f4776a6f send the nassdus sooner in the rrc reconf procedure 4 years ago