7352bfa4bd
mac_test: add unit test for retxBSR timer
...
this test varifies the correct operation of the retxBSR timer.
the first PDU includes a long BSR to indicate more LCGs have
data to transmit. The retxBSR timer is started and subsequent
PDUs should not send a regular BSR.
After the retxBSR timer expires, a UL PDU should again include
a BSR.
4 years ago
937067a205
proc_phr: rename start_periodic_timer() and make sure its only started if a valid config is present
4 years ago
fab86382c1
mac,rrc: add interface to set SR config explicitly without touching any other MAC function
...
when releasing PUCCH/SRS (see 5.3.13 in 36.331) we need to reset the SR config as well.
In our case, SR is handled by MAC so we need to (re-)configure MAC, not all of
MAC though, just SR.
4 years ago
e7239163e9
silence noisy unhandled in_sync_ev logs
4 years ago
f185272367
added comments explaining the meaning of the cell reselection procedures
4 years ago
49e7b8e36e
- Change periodicity of cell reselection after a new serving cell has been selected
...
- Enable PHY intra measurements during RRC_IDLE
4 years ago
585d7c923a
refactor and simplification of cell selection procedure. Using now a SIB3 threshold to decide whether to select neighbor cell while in RRC_IDLE
4 years ago
cae116932b
rewrite the rrc::leave_connected() function to better match the standard. The measurements should not stop while in RRC_IDLE.
4 years ago
5a4e71a6e4
Created k_enb_context structure that holds k_enb, NCC and NH to make it easier to restore context from failed handover.
4 years ago
bcb422736c
Save and restore NH on handover and handover failure.
4 years ago
08e24d00af
Fix TA console trace
4 years ago
3eb525563a
Fix issue reading MNC length in USIM.
4 years ago
6ae47b6510
SRSUE: Deafult PUCCH/SRS does not imply full PHY dedicated defaults
4 years ago
5e95fd4a43
ul_harq: reduce log level for new_grant_ul() if RNTI isn't found
...
this avoid logging a warning on UE shutdown if the MAC is already reset
but one of the PHY workers still decodes an UL grant for the old RTNI
21:30:29.254844 [RRC ] [I] Going RRC_IDLE
21:30:29.254848 [RRC ] [I] Proc "Go Idle" - Left connected state
21:30:29.259499 [PHY0] [I] [ 3865] Finished setting new PHY configuration cc_idx=0
21:30:29.259512 [PHY0] [I] [ 3865] Setting new PHY configuration cc_idx=0...
21:30:29.264190 [PHY0] [I] [ 3867] Finished setting new PHY configuration cc_idx=0
21:30:29.275036 [PHY1] [I] [ 3872] PHICH: hi=1, corr=1.0, I_lowest=1, n_dmrs=0, I_phich=0
21:30:29.275050 [MAC ] [W] [ 3872] Received grant for unknown rnti=0x46
4 years ago
362461329a
rrc: improve log message when detecting RLF
4 years ago
76c648106f
rrc: remove varMeasState for unknown neighbor cells
...
this fixes issue #1846 that appears to be related
to the enter/exit state for measurements that is kept
even after a cell disappears from the neighbor list
4 years ago
829dfc4e60
metrics_stdout: fix precision calculation for 100%
...
the precision for 100% was causing the default value of -1 which in turn
cause to print the full precision resulting in ugly stdout plots.
before:
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k100.000000% 0.0 0.0 0.0 0.0 0%
after:
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 100% 0.0 0.0 0.0 0.0 0%
4 years ago
e72219789e
ul_harq: don't clear payload buffer during HARQ reset
...
this fixes #1791 which was caused by a race between
the PHY workers preparing a new UL-SCH PDU and the Stack resetting
the MAC, which in turn resets the HARQ processeses, which cleared
the buffer and set the length to zero.
Not explicitly clearing the buffer on a HARQ reset seems to be
fine since the PHY worker clears the buffer before starting to
pack a new PDU anyway.
4 years ago
22a6dc305f
Moved common variables and functions from the usim and pcsc_usim classes into usim_base class.
4 years ago
8a917bdd06
fix RRC phy controller call to phy->set_config. Only the PCell was being configured
4 years ago
4ebe92f6a3
refactor phy configuration in the rrc to keep track of activated scells, and cells configurations
4 years ago
cfc77118d3
disable console print of scell activation command during handover
4 years ago
d910c910a4
rrc::meas_cell now uses stack timers instead of system timers.
4 years ago
49ad1a4312
added unit test for meas cells
4 years ago
023d32975a
avoid use of pointers to meas_cells in ho_proc as they may become dangling
4 years ago
072b7be582
renamed rrc::cell_t to rrc::meas_cell
4 years ago
d02e8135fb
metrics_stdout: reset n_reports var after writing intermediate table header
4 years ago
0ef8e1fdac
rrc: include pci when logging serving cell measurement
...
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell
15:49:11.357447 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS: New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
4 years ago
6e0abd30dd
ue,phy_common: include Pcell PCI in cell measurements
...
this allows easier plotting in RRC when PHY cell
measurements already include the PCI
4 years ago
baf171d446
rrc: improve SR configuration logging
...
* move logging of SR max attempts into MAC logging
* log new MAC config whenever it is updated
4 years ago
bf7c2b800e
proc_sr: log error when trying to enable faulty SR config
4 years ago
04acc78c7d
metrics_test: add neighbor cell test
...
cleanup test and add neighbor cells so the displaying is tested
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal-------------Neighbour--DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 8 -33 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 8 -33 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
4 years ago
ddbf4e1645
metrics_stdout: print new table header if neighbour cells change
...
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.
--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -66 61 -3.3k 1 -76 11 18 1.1 8.4M 3% 0.0 21 262 167k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.1 9.6M 2% 0.0 22 476 214k 0%
0 2 -65 60 -3.3k 1 -76 16 22 1.3 13M 3% 0.0 23 1.1k 734k 0%
0 2 -64 59 -3.3k 1 -76 17 23 1.3 15M 2% 0.0 23 602 424k 0%
0 2 -63 58 -3.3k 1 -77 20 25 1.4 19M 3% 0.0 23 501 304k 0%
0 2 -62 57 -3.3k 1 -77 22 27 1.8 20M 10% 0.0 22 417 418k 0%
0 2 -61 56 -3.3k 1 -77 24 28 1.8 25M 9% 0.0 23 396 439k 0%
0 2 -61 56 -3.3k 1 -77 26 29 1.5 23M 22% 0.0 23 841 407k 0%
0 2 -60 55 -3.3k 1 -77 27 31 1.3 27M 11% 0.0 23 890 1.1M 0%
0 2 -59 54 -3.3k 1 -77 27 32 1.00 30M 3% 0.0 23 583 524k 0%
0 2 -59 54 -3.3k 1 -77 27 32 0.92 32M 1% 0.0 23 1.1k 503k 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -59 54 -3.3k 27 31 1.1 30M 4% 0.0 23 1.2k 529k 0%
0 2 -60 55 -3.3k 27 30 1.4 25M 18% 0.0 23 540 442k 0%
0 2 -61 56 -3.3k 26 29 1.6 23M 21% 0.0 23 536 429k 0%
0 2 -62 57 -3.3k 24 28 1.8 23M 13% 0.0 23 834 456k 0%
0 2 -62 57 -3.3k 1 -78 21 26 1.6 20M 7% 0.0 23 723 425k 0%
0 2 -63 58 -3.3k 1 -76 17 22 1.1 15M 3% 0.0 23 470 267k 0%
0 2 -64 59 -3.3k 1 -77 17 22 1.3 15M 3% 0.0 23 167 280k 0%
0 2 -65 60 -3.3k 1 -76 14 21 1.3 11M 2% 0.0 22 57 223k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.2 9.0M 3% 0.0 21 135 182k 0%
0 2 -66 61 -3.4k 1 -70 9.3 17 1.0 6.9M 2% 0.0 21 246 126k 0%
0 2 -67 62 -3.3k 1 -75 8.2 16 1.1 4.9M 3% 0.0 20 0.0 122k 0%
4 years ago
2f0125ef4e
Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging.
4 years ago
1f2cca8909
in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy
4 years ago
edd5c50f9a
pass nas pdus after sending rrc reconf complete
4 years ago
cf89f4300a
fix ttcn3 to signal back to stack that a phy config has been completed
4 years ago
c6f4776a6f
send the nassdus sooner in the rrc reconf procedure
4 years ago
2416e274a7
fix rrc_meas_test. The phy now needs to signal back to the rrc that the phy config is complete
4 years ago
fc49b5a030
implemented rrc reconfiguration procedure that includes a continuation when phy configuration is complete
4 years ago
936e3b7bef
mac_test: add manual test for TC 7.1.4.6
4 years ago
5a9b1865e4
proc_bsr: fix typo
4 years ago
ef9d77c966
SRSUE: add PRACH config present field in PHY configuration structure
4 years ago
51b27fc255
Import latest srslog version ( #1796 )
...
* - Import latest srslog version.
- Adjusted the nas_test to create logs correctly.
- Remove timestamp formatting now that is provided by srslog.
4 years ago
924cc4f937
during cell selection, if the serving cell is ok, avoid calling serving cell configuration if the sibs are already acquired
4 years ago
4e88daae21
Set DCI unpacking errors to info ( #1781 )
4 years ago
dfeed52514
- Rename out_stream function to console.
4 years ago
62faef7c71
- Replaced all uses of the log::console method.
4 years ago
b3eb9651d6
disable cqi in scells during handover procedure
4 years ago
f4c7021a5f
Appy phy configuration to current_phy_cfg before sending to PHY after HO
4 years ago
8a9a95a937
ensure sibs are acquired if cell selection calls cell search
4 years ago
af3ff5985e
removal of console print of last selected cell during the cell selection procedure.
4 years ago
c33e94fede
fix conformace 8_5_1_1 failure
4 years ago
045f647914
fix edge case where serving cell is good enough for reestablishment but the sibs are not yet acquired
4 years ago
f32d9f8322
ttcn3: call stop in UE dtor
...
fixes stop issue of TTCN3 DUT
4 years ago
d671e39c93
Fix SINR not correctly considering noise. Missed dBm conversion
4 years ago
5ecbe8fb17
cleanup of the reestablishment procedure state machine. It does not need to wait for the serving cell configuration because such procedure is already included in the cell selection procedure
4 years ago
b3bfe336a9
Make sure that remote address test has a ip mask
4 years ago
6ce5863f03
test/tft_test: Add a combined test for IPv6 packets
4 years ago
9ba8b62972
test/tft_test: Update filter test suite
...
The “IPv4 local address type” filter should be 9 bytes since it includes
not only the ip address, but also its subnet mask.
Quoting from 3GPP TS 24.008 10.5.6.12:
"""
For "IPv4 remote address type", the packet filter component value field
shall be encoded as a sequence of a four octet IPv4 address field and a
four octet IPv4 address mask field. The IPv4 address field shall be
transmitted first. For "IPv4 local address type", the packet filter
component value field shall be encoded as defined for "IPv4 remote
address type".
"""
Same for the ToS which also includes a 1 byte mask value
4 years ago
5783c01cbb
tf_packet_filter: Improve support for the different filter types
4 years ago
bb691f0cbe
Fix priority order in BSR trigger. Was not being triggered if SRB2 data was pending in the buffer ( #1771 )
4 years ago
8c30822350
Fix bug in update_measurements() not reporting in_sync in single carrier
4 years ago
0997daa7a0
now the handover procedure in the srsUE does not wait for the phy cell selection result. It only waits for the RA result
4 years ago
c75c463263
Use SNR instead of SINR for RLF threshold ( #1769 )
...
* Use SNR instead of SINR for RLF threshold
* Send in/out-sync only for cc_idx=0
4 years ago
76bfc78147
Fix issues with Sounding-RS ( #1761 )
...
* Fix deadlock caused by update_measurements calling in_sync
* Fix overlapping SRS condition
* Do not use shortened PUSCH in transmissions and retx from RAR
* Revert "Fix deadlock caused by update_measurements calling in_sync"
This reverts commit f58c8c8c766f8f95baa3a3bf8287d8e25b2057ba.
4 years ago
2d321231df
fix reest proc. The reest proc state has to be set before launching the procedure, because the procedure can complete immediately on launch call
4 years ago
86f4d469c6
Added some functions to save and restore AS keys for the case of failed handover in the USIM
4 years ago
81ab4c1a65
make sure ho procedure waits for t304 expiry in all cases
4 years ago
b94d24ed98
Take into account CRS from neigbhour cells when measuring interference ( #1757 )
...
* Take into account CRS from neigbhour cells when measuring interference
* fix std::isnormal compilation
* Fixed compilation of test
* Address comments
* Remove unused overrides
4 years ago
cf89d6645b
add comments explaining each function of the reest procedure
4 years ago
d068d594af
implemented rrc reestablishment procedure part after sending reest request
4 years ago
7d6c9a1751
Add cause and cell pci to reestablishment console message
4 years ago
73e21daeb2
refactor reestablishment procedure to more closely follow TS.
4 years ago
1afc137032
[REBASE] Make PHY non-blocking and fefactor HO procedure ( #1753 )
...
* Make PHY non-blocking and fefactor HO procedure
* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers
Co-authored-by: Ismael Gomez <ismagom@gmail.com>
4 years ago
399b986d0b
Fix deadlock caused by update_measurements calling in_sync ( #1760 )
4 years ago
eb370642ab
verify cell selection observer is set before calling it
4 years ago
7f8af023b8
added a callback that always gets triggered when the phy cell selection completes. This callback checks if cell selection failed, and if so, sets the rsrp of the selected cell to -infinity
4 years ago
f0d651ae8e
- Fixed a leak in the MME class not releasing the static byte buffer pool.
...
- Now the pool gets destroyed on program exit using a unique_ptr.
- Removed manual cleanup() calls in all the code base to free the pool instance.
4 years ago
5968157ea5
Protect better the access to shared variables in phy_common and metrics ( #1750 )
4 years ago
eeb2b904aa
ue,rach: fix failing RACH proc when Msg3 grant RNTI matches current CRNTI
...
this was preventing that the Temp-CRNTI used in the RAR to be identical
to the currently configured C-RNTI of the UE.
The issue simply was that the RACH procedure was declared successful too
early, even before the Msg3 UL grant was filled with the Msg3 content.
The patch moves the logic that detects the successful completion of
the RACH procedure below the Msg3 packing.
4 years ago
a36f9bddc2
ttcn3: use RNTI values in RACH provided by tester
...
this patch extends the SS to use the C-RNTI and Temp CRNTI values
provided by the tester for RAR and Msg3.
4 years ago
e14cb4b405
- Fix a missing thread join in the phy which caused a memory leak.
4 years ago
5acc1c9a73
- Cleaned up style in the PRACH class:
...
* Removed magic numbers.
* Reduced indentation of statements with early exists.
* Removed elses after a return statement.
* Trimmed unnecessary include files.
* Default initialized members in the class.
4 years ago
b6bbe8761a
- Remove left over printf.
4 years ago
79f5b62551
- Calculate PRACH buffers on the fly when required instead of pregenerating all of them.
4 years ago
b616944a13
ue,rrc: fix security config during HO/reestablishment
...
we fix a number of very related issues for HO/reestablishment
in the success/error case:
* this patch removes the hard-coded check that intra-cell HO aren't
allowed. There are cases where eNBs use this method to update
the security context.
* the patch also fixes an issue after failed HO where the security context
of the source eNB should be used for the reestablishment.
* update security keys according to specs when mobilitycontrol
indicated change of key
4 years ago
d90de639e5
ttcn3_syssim: continue when epoll returns -1
...
this allows to debug and step in the SS
4 years ago
1b266257a1
ttcn3_phy: improve logging of cell measurements
4 years ago
6827c2df21
rrc_meas: disable layer3 filtering until quantity config is received
...
the filter alpha was initialized to zero by default which causes an
issue because the first measurement for a cell can't be updated,
because the filtering function will always return the current value.
According to 36.331 Sec 5.5.3.2 Note 2, a k-value of 0 should turn
off filtering, which should be used as the default value until
an update is received from the network.
4 years ago
97133894e6
the Ocs value used in the measReport triggering decision was not being set correctly. The enum of the cell individual offset in the measCfg was being cast to an int and stored. Instead what we want is to store the actual offset value using the ASN1 enum->number lookup table.
4 years ago
44c2412be2
SRSUE: silent PUSCH encoding error by dropping invalid grant
4 years ago
739c0c5c00
altered plmn search procedure handling of failed cell searches. If a cell search procedure fails due to inability to select a cell or acquire SIB1, the plmn search carries on for other frequencies.
4 years ago
3088cdbb0f
ttcn3: fix uncaught exception in SS
...
fix accessing child element in parsed Json without checking
its existence.
4 years ago
8df388ba3e
usim: fix typo in log
4 years ago
3e824f6370
ttcn3: convert TTI action vector to queue
...
this makes sures queued events are executed FIFO
4 years ago
624c8142ad
ttcn3: refactor cell handling in SS
...
this rather large patch changes the way cells are handled in the SS.
It moves RLC and PDCP entities to the cell map of the SS, such that each cell
has its own entities. This allows to support HO operation, for example,
in which two cells need to send SRB messages.
It also extends most of the syssim interface to include the cell name
in all commands so they can be applied on the specified cell only.
4 years ago
4650a620d9
ttcn3: refactor cell search and selection in TTCN3 PHY
...
- make sure only suitable cells are reported/selected
4 years ago
973de8f78d
ttcn3_dut: block OS signals before starting log backend
...
this prevents the backend thread from handling the signals. they
are only handled by epoll running in the main thread.
this fixes #1713
4 years ago
b397878d25
Fix comments in ue.conf
4 years ago
Andre Puschmann
Francisco Paisana
Pedro Alvarez
Xavier Arteaga
faluco
Ismael Gomez
faluco
Sylvain Munaut