This commit addresses the following points
- If a NAS-PDU IE is contained in the E-RAB RELEASE COMMAND message, the eNB shall pass it to the UE.
- Issue RRCConnectionReconfiguration for the DRB to be removed
- Cleaning of DRB in RLC and GTP-U
- Fix for Malformed E-RAB Setup Response upon reaching max. DRBs
* Match hex dump indentation with srslog.
* Port asn1 utils to use srslog. Converted logging functions from taking varargs to variadic template functions.
* Remove trailing new lines in log lines from asn1 utils.
* First round of upgrades to srslog to asn1 tests.
* Second round of porting asn1 tests to srslog.
- multiple tunnels per E-RAB
- data forwarding between connected GTPU tunnels
- forwarding GTPU End Marker between connected tunnels
- TeNB GTPU handles in-sequence delivery when multiple tunnels for the same ERAB exist.
this patch fixes an issue with TC_9_3_1_17 after the "send attach in RRC connected" issue
has been fixed. The TC failed because the UE would always attempt to re-attach, even
after receiving an explicit detach request WITHOUT re-attach from the network.
According to TS 24.301 Sec. 5.5.2.3.2 the handling of that message largely depends
on the detach cause sent by network. Since we don't currently parse and handle
that the simplest solution here is to just enter deregistered:::null.
The patch is also part of the fix for issue #2237
this is an attempt to fix issue #2237 that cause the UE to fail to
attach because the attach request wasn't resent after T3410+T3411
expired.
this was only because RRC wasn't idle at that stage and the attach
request generation was aborted.
The patch fixes this by passing the NAS PDU directly to RRC in
connected state.
The patch also converts the blocking PDU alloc to a non-blocking one.
* Started logger replacement in epc main.
* Replaced loggers in nas and s1ap.
* Replace loggers in nas statics.
* Replaced loggers in s1ap ctx mngmt.
* Replace loggers in s1ap erab mngmt.
* Replaced loggers in s1ap mngmt proc.
* Replaced loggers in s1ap nas transport.
* Replaced loggers in s1ap paging.
* Replaced loggers in mme.
* Replaced loggers in mme gtpc.
* Started removing logger injection in init functions and cleaned up argument passing to nas statics.
* Remove logger injection from mme and s1ap.
* Replaced loggers in the hss class.
* Replaced loggers in gtpc.
* Replaced loggers in GTPU and SPGW.
* Replaced loggers in MBMS.
* Replaced UE logger in the ue class.
* Replaced loggers in the main phy class and prach.
* Replaced loggers in phy common and ta_control.
* Replace loggers in cc and sf workers.
* Replaced loggers in intra_measure, scell_recv, search, sfn_sync, sync.
* Remove last uses of the old loggers in the main phy class.
* Remove stray newline in logs.
* Replaced loggers in ue gw.
* - Started to replace loggers in the ue stack.
- Replaced loggers in usim and pcsc.
- Adapted nas and usim tests.
* Replace loggers in nas.
* Added missing log init calls in two previously modified tests.
* Replaced logger in nas idle procs.
* Replaced loggers in nas emm state.
* Replaced loggers in tft packet filter and adapted tft test.
* Replaced loggers in main RRC class.
* Replaced loggers in RRC cell.
* Replaced loggers in RRC meas.
* Replaced loggers in rrc procedures.
* Started logger replacement in MAC layer, more precisely in demux and dl_harq classes.
Been unable to inject loggers in construction for dl_tb_process due to very weird static assertions in the std::vector code being the type not constructible which is not true, so instead use the main MAC logger directly.
* Replaced loggers in mac mux class.
* Replaced loggers in mac pro_bsr.
* Replaced loggers in mac proc phr.
* Replaced loggers in mac proc SR and RA.
* Replace loggers in mac UL HARQ.
* Replaced loggers in main ue stack class.
* Fixed nas test crashing due to a null string.
* Ported mac_test to use the new loggers.
* Removed TTI reporting for the PHY log as the old logger did.
* Replaced loggers in UE phy tests.
* Configure loggers in nas_test.
* Replaced loggers in rrc_meas_test.
* Replaced loggers in rrc_reconfig_test.
* Added missing newline in tft_test.
* Fix compilation errors in TTCN3 tests.
* Fix linker error detected in CI and warning.
* Replaced loggers in TTCN3 tests.
* Fix a text replace error in some log messages.
* Remove trailing newlines from log entries.
* Remove old logger from rrc.
* Flush backend before printing the test status.
* - Fix compilation error from previous rebase.
- Remove trailing newlines from some missing log entries.
* - Started porting the enb PHY layer to use srslog loggers.
- Updated srslog to manage the none level.
* Finished porting enb phy layer including the NR part.
* Ported MAC, GTPU, PDCP, RLC and S1AP enb classes to use srslog.
* Use new stack logger.
* Ported the enb RRC clases to use srslog.
* Remove unused log macros.
* Replace loggers in sched, sched_carrier, sched_helpers.
* Replaced loggers in sched grid.
* Replaced loggers in sched harq.
* Replaced loggers in sched ue.
* Replaced loggers in sched ue ctrl.
* Replace loggers in sched ue ctrl TPC.
* Replaced loggers in sched subclasses.
* Replaced loggers in rrc_meascfg_test
* Configure loggers in rrc_mobility_test.
* Fix compilation errors left out after the rebase.
* - Implement a custom log sink that will serve as a test spy to intercept and count the number of error and warning log entries.
- Adapt the erab_test_setup and rrc_mobility tests to use this new class and make them pass again.
* - Remove trailing new lines introduced in the rebase.
- Ported the sched_ue_cell class to srslog.
* Remove unused log member.
* Ported mac tests to srslog.
* - Removed remaining trailing newlines from log entries.
* Fix compiler errors detected in CI.
* Fix another static variable without definition passed to log lines.
* Fixed a bug in srslog::flush that would never end when the backend queue is full.
* Fetch the RRC logger instead of injecting it in the constructor.
Xavier Arteaga
Andre Puschmann
Francisco
faluco
herlesupreeth
faluco
Frederick Pelchat
Pedro Alvarez
David Rupprecht