yagoda
615af5cc4d
setting seed to constant in prach test
4 years ago
Andre Puschmann
829dfc4e60
metrics_stdout: fix precision calculation for 100%
...
the precision for 100% was causing the default value of -1 which in turn
cause to print the full precision resulting in ugly stdout plots.
before:
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k100.000000% 0.0 0.0 0.0 0.0 0%
after:
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 100% 0.0 0.0 0.0 0.0 0%
4 years ago
Andre Puschmann
e72219789e
ul_harq: don't clear payload buffer during HARQ reset
...
this fixes #1791 which was caused by a race between
the PHY workers preparing a new UL-SCH PDU and the Stack resetting
the MAC, which in turn resets the HARQ processeses, which cleared
the buffer and set the length to zero.
Not explicitly clearing the buffer on a HARQ reset seems to be
fine since the PHY worker clears the buffer before starting to
pack a new PDU anyway.
4 years ago
Andre Puschmann
b08a586fd4
pdu: refactor error logging
...
just some refactoring of error messages when a PDU packing error occurs
4 years ago
Francisco Paisana
49186e2b1f
Fix NCC set in HO command message for intra-enb handover
4 years ago
faluco
693d2f10b7
- Fix hex dumps newlines.
4 years ago
Pedro Alvarez
22a6dc305f
Moved common variables and functions from the usim and pcsc_usim classes into usim_base class.
4 years ago
Francisco Paisana
8a917bdd06
fix RRC phy controller call to phy->set_config. Only the PCell was being configured
4 years ago
Francisco Paisana
2e10c8e13d
bug fix - eNB was not allocating UL grants for an UE that has performed intra-enb handover. The problem resulted from the fact that the ue configuration in the scheduler not accounting for removed cells.
4 years ago
Francisco Paisana
8a5a571045
bug fix - in case of intra-enb Handover, the eNB was not adding SCells in the HO command
4 years ago
Francisco Paisana
4383796393
add scells in case of intra-enb handover
4 years ago
Francisco Paisana
4ebe92f6a3
refactor phy configuration in the rrc to keep track of activated scells, and cells configurations
4 years ago
Francisco Paisana
cfc77118d3
disable console print of scell activation command during handover
4 years ago
Francisco Paisana
d910c910a4
rrc::meas_cell now uses stack timers instead of system timers.
4 years ago
Francisco Paisana
49ad1a4312
added unit test for meas cells
4 years ago
Francisco Paisana
023d32975a
avoid use of pointers to meas_cells in ho_proc as they may become dangling
4 years ago
Francisco Paisana
072b7be582
renamed rrc::cell_t to rrc::meas_cell
4 years ago
Andre Puschmann
d02e8135fb
metrics_stdout: reset n_reports var after writing intermediate table header
4 years ago
Francisco Paisana
688dda30a4
favour carriers with best channel conditions for UL grants due to SRs
4 years ago
Andre Puschmann
0ef8e1fdac
rrc: include pci when logging serving cell measurement
...
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell
15:49:11.357447 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS: New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
4 years ago
Andre Puschmann
6e0abd30dd
ue,phy_common: include Pcell PCI in cell measurements
...
this allows easier plotting in RRC when PHY cell
measurements already include the PCI
4 years ago
Andre Puschmann
baf171d446
rrc: improve SR configuration logging
...
* move logging of SR max attempts into MAC logging
* log new MAC config whenever it is updated
4 years ago
Andre Puschmann
bf7c2b800e
proc_sr: log error when trying to enable faulty SR config
4 years ago
Andre Puschmann
04acc78c7d
metrics_test: add neighbor cell test
...
cleanup test and add neighbor cells so the displaying is tested
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal-------------Neighbour--DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 8 -33 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 8 -33 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
4 years ago
Andre Puschmann
ddbf4e1645
metrics_stdout: print new table header if neighbour cells change
...
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.
--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -66 61 -3.3k 1 -76 11 18 1.1 8.4M 3% 0.0 21 262 167k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.1 9.6M 2% 0.0 22 476 214k 0%
0 2 -65 60 -3.3k 1 -76 16 22 1.3 13M 3% 0.0 23 1.1k 734k 0%
0 2 -64 59 -3.3k 1 -76 17 23 1.3 15M 2% 0.0 23 602 424k 0%
0 2 -63 58 -3.3k 1 -77 20 25 1.4 19M 3% 0.0 23 501 304k 0%
0 2 -62 57 -3.3k 1 -77 22 27 1.8 20M 10% 0.0 22 417 418k 0%
0 2 -61 56 -3.3k 1 -77 24 28 1.8 25M 9% 0.0 23 396 439k 0%
0 2 -61 56 -3.3k 1 -77 26 29 1.5 23M 22% 0.0 23 841 407k 0%
0 2 -60 55 -3.3k 1 -77 27 31 1.3 27M 11% 0.0 23 890 1.1M 0%
0 2 -59 54 -3.3k 1 -77 27 32 1.00 30M 3% 0.0 23 583 524k 0%
0 2 -59 54 -3.3k 1 -77 27 32 0.92 32M 1% 0.0 23 1.1k 503k 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -59 54 -3.3k 27 31 1.1 30M 4% 0.0 23 1.2k 529k 0%
0 2 -60 55 -3.3k 27 30 1.4 25M 18% 0.0 23 540 442k 0%
0 2 -61 56 -3.3k 26 29 1.6 23M 21% 0.0 23 536 429k 0%
0 2 -62 57 -3.3k 24 28 1.8 23M 13% 0.0 23 834 456k 0%
0 2 -62 57 -3.3k 1 -78 21 26 1.6 20M 7% 0.0 23 723 425k 0%
0 2 -63 58 -3.3k 1 -76 17 22 1.1 15M 3% 0.0 23 470 267k 0%
0 2 -64 59 -3.3k 1 -77 17 22 1.3 15M 3% 0.0 23 167 280k 0%
0 2 -65 60 -3.3k 1 -76 14 21 1.3 11M 2% 0.0 22 57 223k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.2 9.0M 3% 0.0 21 135 182k 0%
0 2 -66 61 -3.4k 1 -70 9.3 17 1.0 6.9M 2% 0.0 21 246 126k 0%
0 2 -67 62 -3.3k 1 -75 8.2 16 1.1 4.9M 3% 0.0 20 0.0 122k 0%
4 years ago
Pedro Alvarez
2f0125ef4e
Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging.
4 years ago
Francisco Paisana
137e554eb3
reestablish pdcp bearers is required in case of AM bearers
4 years ago
faluco
079ae70e64
- Fix logs entries having two newlines instead of one. The old log formatter will delegate this to the new one.
4 years ago
Francisco Paisana
1f2cca8909
in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy
4 years ago
Francisco Paisana
edd5c50f9a
pass nas pdus after sending rrc reconf complete
4 years ago
Francisco Paisana
cf89f4300a
fix ttcn3 to signal back to stack that a phy config has been completed
4 years ago
Francisco Paisana
c6f4776a6f
send the nassdus sooner in the rrc reconf procedure
4 years ago
Francisco Paisana
2416e274a7
fix rrc_meas_test. The phy now needs to signal back to the rrc that the phy config is complete
4 years ago
Francisco Paisana
fc49b5a030
implemented rrc reconfiguration procedure that includes a continuation when phy configuration is complete
4 years ago
Francisco Paisana
4c88404801
fix measurement report handling in case of intra enb handover
4 years ago
Andre Puschmann
936e3b7bef
mac_test: add manual test for TC 7.1.4.6
4 years ago
Andre Puschmann
5a9b1865e4
proc_bsr: fix typo
4 years ago
Andre Puschmann
f73fa47a7b
pdu: fix printing of buffer state of long BSR
...
extracted wrong number of bits for 2nd LCID in long BSR
4 years ago
Xavier Arteaga
ef9d77c966
SRSUE: add PRACH config present field in PHY configuration structure
4 years ago
faluco
51b27fc255
Import latest srslog version ( #1796 )
...
* - Import latest srslog version.
- Adjusted the nas_test to create logs correctly.
- Remove timestamp formatting now that is provided by srslog.
4 years ago
Francisco Paisana
924cc4f937
during cell selection, if the serving cell is ok, avoid calling serving cell configuration if the sibs are already acquired
4 years ago
Francisco Paisana
4b1626bf24
fix eutra packing recovering during reestablishment in the srsenb
4 years ago
Ismael Gomez
4e88daae21
Set DCI unpacking errors to info ( #1781 )
4 years ago
faluco
85544bb8d3
- Remove unnecessary newline character and optimize the code to use fputs instead of fprintf since no formatting is required.
4 years ago
faluco
dfeed52514
- Rename out_stream function to console.
4 years ago
faluco
62faef7c71
- Replaced all uses of the log::console method.
4 years ago
faluco
302f9793ca
- Add common utils to print to stdout and stderr as a first step to remove the log::console method.
4 years ago
Andre Puschmann
58ce9d3959
pdcp: adding basic test to check if control PDUs are handled correctly
...
use a 3 B long status PDU to check if its dropped from the rx'ing entity
4 years ago
Andre Puschmann
795db30338
pdcp: drop PDCP control PDUs
...
this patch adds a check to drop all PDCP control PDUs
in order to prevent handling them as data PDUs.
This could happen when the size exceeded the arbitrary length check.
This should fix #1787
4 years ago
Francisco Paisana
b3eb9651d6
disable cqi in scells during handover procedure
4 years ago