Deallocate measurement timers on RLF. Force cell reselection during attach request from gw after RLF

master
Ismael Gomez 7 years ago
parent 6ac39ee1a9
commit 7c210c3fc2

@ -229,6 +229,10 @@ void rrc::run_tti(uint32_t tti) {
rrc_log->warning("Could not find any cell to camp on\n");
break;
case rrc::SAME_CELL:
if (!phy->cell_is_camping()) {
rrc_log->warning("Did not reselect cell but serving cell is out-of-sync.\n");
serving_cell->in_sync = false;
}
break;
}
}
@ -378,7 +382,7 @@ bool rrc::connection_request(LIBLTE_RRC_CON_REQ_EST_CAUSE_ENUM cause,
rrc_log->info("Initiation of Connection establishment procedure\n");
// Perform cell selection & reselection for the selected PLMN
cell_selection();
cs_ret_t cs_ret = cell_selection();
// .. and SI acquisition
if (phy->cell_is_camping()) {
@ -431,7 +435,18 @@ bool rrc::connection_request(LIBLTE_RRC_CON_REQ_EST_CAUSE_ENUM cause,
rrc_log->error("Configuring serving cell\n");
}
} else {
rrc_log->error("Could not find any suitable cell to connect\n");
switch(cs_ret) {
case SAME_CELL:
rrc_log->warning("Did not reselect cell but serving cell is out-of-sync.\n");
serving_cell->in_sync = false;
break;
case CHANGED_CELL:
rrc_log->warning("Selected a new cell but could not camp on. Setting out-of-sync.\n");
serving_cell->in_sync = false;
break;
default:
rrc_log->warning("Could not find any suitable cell to connect\n");
}
}
pthread_mutex_unlock(&mutex);
@ -1523,6 +1538,7 @@ void rrc::leave_connected()
{
rrc_log->console("RRC IDLE\n");
rrc_log->info("Leaving RRC_CONNECTED state\n");
state = RRC_STATE_IDLE;
drb_up = false;
security_is_activated = false;
measurements.reset();
@ -1537,7 +1553,6 @@ void rrc::leave_connected()
mac_timers->timer_get(t311)->stop();
mac_timers->timer_get(t304)->stop();
rrc_log->info("Going RRC_IDLE\n");
state = RRC_STATE_IDLE;
if (phy->cell_is_camping()) {
// Receive paging
mac->pcch_start_rx();
@ -2630,8 +2645,15 @@ void rrc::rrc_meas::reset()
{
filter_k_rsrp = liblte_rrc_filter_coefficient_num[LIBLTE_RRC_FILTER_COEFFICIENT_FC4];
filter_k_rsrq = liblte_rrc_filter_coefficient_num[LIBLTE_RRC_FILTER_COEFFICIENT_FC4];
// FIXME: Turn struct into a class and use destructor
std::map<uint32_t, meas_t>::iterator iter = active.begin();
while (iter != active.end()) {
remove_meas_id(iter++);
}
// These objects do not need destructor
objects.clear();
active.clear();
reports_cfg.clear();
phy->meas_reset();
bzero(&pcell_measurement, sizeof(meas_value_t));

Loading…
Cancel
Save