Documented all headers, fixed srs_ prefix repetition for modem table

srslte/include/srslte/agc/agc.h

@@ -25,7 +25,14 @@
  *
  */
 
-
+/**********************************************************************************************
+ *  File:         agc.h
+ *
+ *  Description:  Automatic gain control
+ *                This module is not currently used
+ *
+ *  Reference:
+ *********************************************************************************************/
 
 #ifndef AGC_
 #define AGC_
@@ -36,10 +43,6 @@
 
 #include "srslte/config.h"
 
-/* Automatic Gain Control 
- *
- */
-
 #define SRSLTE_AGC_DEFAULT_BW  (5e-2)
 
 typedef struct SRSLTE_API{

srslte/include/srslte/ch_estimation/chest_dl.h

@@ -25,7 +25,19 @@
  *
  */
 
-
+/**********************************************************************************************
+ *  File:         chest_dl.h
+ *
+ *  Description:  3GPP LTE Downlink channel estimator and equalizer.
+ *                Estimates the channel in the resource elements transmitting references and
+ *                interpolates for the rest of the resource grid.
+ *                The equalizer uses the channel estimates to produce an estimation of the
+ *                transmitted symbol.
+ *                This object depends on the srslte_refsignal_t object for creating the LTE
+ *                CSR signal.
+ *
+ *  Reference:
+ *********************************************************************************************/
 
 #ifndef CHEST_DL_
 #define CHEST_DL_
@@ -38,15 +50,6 @@
 #include "srslte/ch_estimation/refsignal_dl.h"
 #include "srslte/common/phy_common.h"
 
-/** 3GPP LTE Downlink channel estimator and equalizer. 
- * Estimates the channel in the resource elements transmitting references and interpolates for the rest
- * of the resource grid. 
- * 
- * The equalizer uses the channel estimates to produce an estimation of the transmitted symbol. 
- * 
- * This object depends on the srslte_refsignal_t object for creating the LTE CSR signal.  
-*/
-
 #define SRSLTE_CHEST_MAX_FILTER_FREQ_LEN    10
 #define SRSLTE_CHEST_MAX_FILTER_TIME_LEN    4
 
@@ -110,4 +113,4 @@ SRSLTE_API float srslte_chest_dl_get_rsrq(srslte_chest_dl_t *q);
 
 SRSLTE_API float srslte_chest_dl_get_rsrp(srslte_chest_dl_t *q);
 
-#endif
+#endif

srslte/include/srslte/ch_estimation/refsignal_dl.h

@@ -25,13 +25,17 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         refsignal_dl.h
+ *
+ *  Description:  Object to manage downlink reference signals for channel estimation.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.10
+ *********************************************************************************************/
+
 #ifndef SRSLTE_REFSIGNAL_DL_
 #define SRSLTE_REFSIGNAL_DL_
 
-/* Object to manage Downlink reference signals for channel estimation.
- *
- */
-
 #include "srslte/config.h"
 #include "srslte/common/phy_common.h"
 

srslte/include/srslte/ch_estimation/refsignal_ul.h

@@ -25,13 +25,17 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         refsignal_ul.h
+ *
+ *  Description:  Object to manage uplink reference signals for channel estimation.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 5.5
+ *********************************************************************************************/
+
 #ifndef SRSLTE_REFSIGNAL_UL_
 #define SRSLTE_REFSIGNAL_UL_
 
-/* Object to manage Downlink reference signals for channel estimation.
- *
- */
-
 #include "srslte/config.h"
 #include "srslte/phch/pucch.h"
 #include "srslte/common/phy_common.h"

srslte/include/srslte/channel/ch_awgn.h

@@ -25,6 +25,13 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         ch_awgn.h
+ *
+ *  Description:  Additive white gaussian noise channel object
+ *
+ *  Reference:
+ *********************************************************************************************/
 
 #include <complex.h>
 #include <stdint.h>

srslte/include/srslte/common/phy_common.h

@@ -25,6 +25,13 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         phy_common.h
+ *
+ *  Description:  Common parameters and lookup functions for PHY
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10
+ *********************************************************************************************/
 
 #ifndef _LTEBASE_
 #define _LTEBASE_

srslte/include/srslte/common/sequence.h

@@ -25,6 +25,15 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         sequence.h
+ *
+ *  Description:  Pseudo Random Sequence generation. Sequences are defined by a length-31 Gold
+ *                sequence.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 7.2
+ *********************************************************************************************/
+
 #ifndef LTESEQ_
 #define LTESEQ_
 

srslte/include/srslte/common/timestamp.h

@@ -25,6 +25,15 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         timestamp.h
+ *
+ *  Description:  A simple timestamp struct with separate variables for full and frac seconds.
+ *                Separate variables are used to avoid loss of precision in our frac seconds.
+ *                Only positive timestamps are supported.
+ *
+ *  Reference:
+ *********************************************************************************************/
 
 #ifndef TIMESTAMP_
 #define TIMESTAMP_
@@ -32,13 +41,6 @@
 #include <time.h>
 #include "srslte/config.h"
 
-/*!
- * A simple timestamp struct with separate variables for full and frac seconds.
- *
- * Separate variables are used to avoid loss of precision in our frac seconds.
- * Only positive timestamps are supported.
- */
-
 typedef struct SRSLTE_API{
   time_t full_secs;
   double frac_secs;

srslte/include/srslte/dft/dft.h

@@ -32,18 +32,23 @@
 #include <stdbool.h>
 #include "srslte/config.h"
 
-
+/**********************************************************************************************
-/* Generic DFT module.
+ *  File:         dft.h
- * Supports one-dimensional complex and real transforms. Options are set
- * using the dft_plan_set_x functions.
  *
- * Options (default is false):
+ *  Description:  Generic DFT module.
- * mirror - Rearranges negative and positive frequency bins. Swaps after
+ *                Supports one-dimensional complex and real transforms. Options are set
- *            transform for FORWARD, swaps before transform for BACKWARD.
+ *                using the dft_plan_set_x functions.
- * db     - Provides output in dB (10*log10(x)).
+ *
- * norm   - Normalizes output (by sqrt(len) for complex, len for real).
+ *                Options (default is false):
- * dc     - Handles insertion and removal of null DC carrier internally.
+ *
- */
+ *                mirror - Rearranges negative and positive frequency bins. Swaps after
+ *                         transform for FORWARD, swaps before transform for BACKWARD.
+ *                db     - Provides output in dB (10*log10(x)).
+ *                norm   - Normalizes output (by sqrt(len) for complex, len for real).
+ *                dc     - Handles insertion and removal of null DC carrier internally.
+ *
+ *  Reference:
+ *********************************************************************************************/
 
 typedef enum {
   SRSLTE_DFT_COMPLEX, SRSLTE_REAL

srslte/include/srslte/dft/dft_precoding.h

@@ -25,6 +25,14 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         dft_precoding.h
+ *
+ *  Description:  DFT-based transform precoding object.
+ *                Used in generation of uplink SCFDMA signals.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 5.3.3
+ *********************************************************************************************/
 
 #ifndef DFTPREC_
 #define DFTPREC_

srslte/include/srslte/dft/ofdm.h

@@ -29,6 +29,14 @@
 #ifndef LTEFFT_
 #define LTEFFT_
 
+/**********************************************************************************************
+ *  File:         ofdm.h
+ *
+ *  Description:  OFDM modulation object.
+ *                Used in generation of downlink OFDM signals.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6
+ *********************************************************************************************/
 
 #include <strings.h>
 #include <stdlib.h>

srslte/include/srslte/fec/convcoder.h

@@ -25,7 +25,15 @@
  *
  */
 
-
+/**********************************************************************************************
+ *  File:         convcoder.h
+ *
+ *  Description:  Convolutional encoder.
+ *                LTE uses a tail biting convolutional code with constraint length 7
+ *                and coding rate 1/3.
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10 Sec. 5.1.3.1
+ *********************************************************************************************/
 
 #ifndef CONVCODER_
 #define CONVCODER_

srslte/include/srslte/fec/crc.h

@@ -25,6 +25,15 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         convcoder.h
+ *
+ *  Description:  Cyclic Redundancy Check
+ *                LTE requires CRC lengths 8, 16, 24A and 24B, each with it's own generator
+ *                polynomial.
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10 Sec. 5.1.1
+ *********************************************************************************************/
 
 #ifndef CRC_
 #define CRC_

srslte/include/srslte/fec/rm_conv.h

@@ -25,6 +25,15 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         rm_conv.h
+ *
+ *  Description:  Rate matching for convolutionally coded transport channels and control
+ *                information.
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10 Sec. 5.1.4.2
+ *********************************************************************************************/
+
 #ifndef RM_CONV_
 #define RM_CONV_
 

srslte/include/srslte/fec/rm_turbo.h

@@ -25,6 +25,14 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         rm_turbo.h
+ *
+ *  Description:  Rate matching for turbo coded transport channels.
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10 Sec. 5.1.4.1
+ *********************************************************************************************/
+
 #ifndef RM_TURBO_
 #define RM_TURBO_
 

srslte/include/srslte/fec/tc_interl.h

@@ -25,6 +25,14 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         tc_interl.h
+ *
+ *  Description:  Turbo code interleaver.
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10 Sec. 5.1.3.2.3
+ *********************************************************************************************/
+
 #ifndef _TC_INTERL_H
 #define _TC_INTERL_H
 

srslte/include/srslte/fec/turbocoder.h

@@ -25,6 +25,17 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         turbocoder.h
+ *
+ *  Description:  Turbo coder.
+ *                Parallel Concatenated Convolutional Code (PCCC) with two 8-state constituent
+ *                encoders and one turbo code internal interleaver. The coding rate of turbo
+ *                encoder is 1/3.
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10 Sec. 5.1.3.2
+ *********************************************************************************************/
+
 #ifndef TURBOCODER_
 #define TURBOCODER_
 

srslte/include/srslte/fec/turbodecoder.h

@@ -25,6 +25,18 @@
  *
  */
 
+/**********************************************************************************************
+ *  File:         turbodecoder.h
+ *
+ *  Description:  Turbo Decoder.
+ *                Parallel Concatenated Convolutional Code (PCCC) with two 8-state constituent
+ *                encoders and one turbo code internal interleaver. The coding rate of turbo
+ *                encoder is 1/3.
+ *                MAP_GEN is the MAX-LOG-MAP generic implementation of the decoder.
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10 Sec. 5.1.3.2
+ *********************************************************************************************/
+
 #ifndef TURBODECODER_
 #define TURBODECODER_
 

srslte/include/srslte/fec/viterbi.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         viterbi.h
+ *
+ *  Description:  Viterbi decoder for convolutionally encoded data.
+ *                Used for decoding of PBCH and PDCCH (type 37 decoder).
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef VITERBI_
 #define VITERBI_

srslte/include/srslte/io/binsource.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         binsource.h
+ *
+ *  Description:  Pseudo-random binary source.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef BINSOURCE_
 #define BINSOURCE_

srslte/include/srslte/io/filesink.h

@@ -25,6 +25,15 @@
  *
  */
 
+/******************************************************************************
+ *  File:         filesink.h
+ *
+ *  Description:  File sink.
+ *                Supports writing floats, complex floats and complex shorts
+ *                to file in text or binary formats.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef FILESINK_
 #define FILESINK_

srslte/include/srslte/io/filesource.h

@@ -25,6 +25,15 @@
  *
  */
 
+/******************************************************************************
+ *  File:         filesource.h
+ *
+ *  Description:  File source.
+ *                Supports reading floats, complex floats and complex shorts
+ *                from file in text or binary formats.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef FILESOURCE_
 #define FILESOURCE_

srslte/include/srslte/io/netsink.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         netsink.h
+ *
+ *  Description:  Network socket sink.
+ *                Supports writing binary data to a TCP or UDP socket.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef NETSINK_
 #define NETSINK_

srslte/include/srslte/io/netsource.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         netsource.h
+ *
+ *  Description:  Network socket source.
+ *                Supports reading binary data from a TCP or UDP socket.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef NETSOURCE_
 #define NETSOURCE_

srslte/include/srslte/mimo/layermap.h

@@ -25,6 +25,15 @@
  *
  */
 
+/******************************************************************************
+ *  File:         layermap.h
+ *
+ *  Description:  MIMO layer mapping and demapping.
+ *                Single antenna, tx diversity and spatial multiplexing are
+ *                supported.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.3.3
+ *****************************************************************************/
 
 #ifndef LAYERMAP_H_
 #define LAYERMAP_H_

srslte/include/srslte/mimo/precoding.h

@@ -25,6 +25,15 @@
  *
  */
 
+/******************************************************************************
+ *  File:         precoding.h
+ *
+ *  Description:  MIMO precoding and deprecoding.
+ *                Single antenna and tx diversity supported.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.3.4
+ *****************************************************************************/
+
 #ifndef PRECODING_H_
 #define PRECODING_H_
 

srslte/include/srslte/modem/demod_hard.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         demod_hard.h
+ *
+ *  Description:  Hard demodulator.
+ *                Supports BPSK, QPSK, 16QAM and 64QAM.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 7.1
+ *****************************************************************************/
 
 #ifndef DEMOD_HARD_
 #define DEMOD_HARD_

srslte/include/srslte/modem/demod_soft.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         demod_soft.h
+ *
+ *  Description:  Soft demodulator.
+ *                Supports BPSK, QPSK, 16QAM and 64QAM.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 7.1
+ *****************************************************************************/
 
 #ifndef DEMOD_SOFT_
 #define DEMOD_SOFT_
@@ -43,7 +51,7 @@ typedef enum SRSLTE_API {
 typedef struct SRSLTE_API {
   float sigma;      // noise power
   srslte_demod_soft_alg_t alg_type;    // soft demapping algorithm (SRSLTE_DEMOD_SOFT_ALG_EXACT or SRSLTE_DEMOD_SOFT_ALG_APPROX)
-  srslte_srslte_modem_table_t *table;  // symbol mapping table (see modem_table.h)
+  srslte_modem_table_t *table;  // symbol mapping table (see modem_table.h)
   uint32_t *zones; 
   float *dd; 
   uint32_t max_symbols;
@@ -55,7 +63,7 @@ SRSLTE_API int srslte_demod_soft_init(srslte_demod_soft_t *q,
 SRSLTE_API void srslte_demod_soft_free(srslte_demod_soft_t *q); 
 
 SRSLTE_API void srslte_demod_soft_table_set(srslte_demod_soft_t *q, 
-                                            srslte_srslte_modem_table_t *table);
+                                            srslte_modem_table_t *table);
 
 SRSLTE_API void srslte_demod_soft_alg_set(srslte_demod_soft_t *q, 
                                           srslte_demod_soft_alg_t alg_type);
@@ -72,7 +80,7 @@ SRSLTE_API int srslte_demod_soft_demodulate(srslte_demod_soft_t *q,
 /* High-level API */
 typedef struct SRSLTE_API {
   srslte_demod_soft_t obj;
-  srslte_srslte_modem_table_t table;
+  srslte_modem_table_t table;
 
   struct srslte_demod_soft_init{
     srslte_mod_t std;    // symbol mapping standard (see modem_table.h)

srslte/include/srslte/modem/mod.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         mod.h
+ *
+ *  Description:  Modulation.
+ *                Supports BPSK, QPSK, 16QAM and 64QAM.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 7.1
+ *****************************************************************************/
 
 #ifndef MOD_
 #define MOD_
@@ -35,14 +43,14 @@
 #include "srslte/config.h"
 #include "modem_table.h"
 
-SRSLTE_API int srslte_mod_modulate(srslte_srslte_modem_table_t* table, 
+SRSLTE_API int srslte_mod_modulate(srslte_modem_table_t* table,
                                    uint8_t *bits, 
                                    cf_t* symbols, 
                                    uint32_t nbits);
 
 /* High-level API */
 typedef struct SRSLTE_API {
-  srslte_srslte_modem_table_t obj;
+  srslte_modem_table_t obj;
   struct mod_init {
     srslte_mod_t std;  // symbol mapping standard (see modem_table.h)
   } init;

srslte/include/srslte/modem/modem_table.h

@@ -25,7 +25,14 @@
  *
  */
 
-
+/******************************************************************************
+ *  File:         modem_table.h
+ *
+ *  Description:  Modem tables used for modulation/demodulation.
+ *                Supports BPSK, QPSK, 16QAM and 64QAM.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 7.1
+ *****************************************************************************/
 
 #ifndef MODEM_TABLE_
 #define MODEM_TABLE_
@@ -49,22 +56,22 @@ typedef struct SRSLTE_API {
   srslte_soft_table_t soft_table;   	// symbol-to-bit mapping (used in soft demodulating)
   uint32_t nsymbols;        	// number of modulation symbols
   uint32_t nbits_x_symbol;      // number of bits per symbol
-}srslte_srslte_modem_table_t;
+}srslte_modem_table_t;
 
 
-SRSLTE_API void srslte_modem_table_init(srslte_srslte_modem_table_t* q);
+SRSLTE_API void srslte_modem_table_init(srslte_modem_table_t* q);
 
-SRSLTE_API void srslte_modem_table_free(srslte_srslte_modem_table_t* q);
+SRSLTE_API void srslte_modem_table_free(srslte_modem_table_t* q);
 
-SRSLTE_API void srslte_modem_table_reset(srslte_srslte_modem_table_t* q);
+SRSLTE_API void srslte_modem_table_reset(srslte_modem_table_t* q);
 
-SRSLTE_API int srslte_modem_table_set(srslte_srslte_modem_table_t* q, 
+SRSLTE_API int srslte_modem_table_set(srslte_modem_table_t* q, 
                                       cf_t* table, 
                                       srslte_soft_table_t *soft_table, 
                                       uint32_t nsymbols, 
                                       uint32_t nbits_x_symbol);
 
-SRSLTE_API int srslte_modem_table_lte(srslte_srslte_modem_table_t* q, 
+SRSLTE_API int srslte_modem_table_lte(srslte_modem_table_t* q, 
                                       srslte_mod_t modulation, 
                                       bool compute_soft_demod);
 

srslte/include/srslte/phch/cqi.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         cqi.h
+ *
+ *  Description:  Channel quality indicator message packing.
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10 Sec. 5.2.2.6, 5.2.3.3
+ *****************************************************************************/
+
 #ifndef CQI_
 #define CQI_
 
@@ -33,11 +41,6 @@
 #include "srslte/config.h"
 #include "srslte/common/phy_common.h"
 
-/**
- * CQI message generation according to 36.212 Sections 5.2.2.6 and 5.2.3.3
- *
- */
-
 
 /* Table 5.2.2.6.2-1: Fields for channel quality information feedback for higher layer configured subband
 CQI reports

srslte/include/srslte/phch/dci.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         dci.h
+ *
+ *  Description:  Downlink control information (DCI)
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10 Sec. 5.3.3
+ *****************************************************************************/
+
 #ifndef DCI_
 #define DCI_
 
@@ -34,13 +42,6 @@
 #include "srslte/common/phy_common.h"
 #include "srslte/phch/ra.h"
 
-/**
- * DCI message generation according to the formats, as specified in
- * 36.212 Section 5.3.3.1
- *
- */
-
-
 #define DCI_MAX_BITS  57
 
 typedef enum {

srslte/include/srslte/phch/harq.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         harq.h
+ *
+ *  Description:  Hybrid Automatic Repeat Request (HARQ)
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef HARQ_
 #define HARQ_
@@ -88,4 +95,4 @@ SRSLTE_API int srslte_harq_codeblock_segmentation(srslte_harq_cbsegm_t *s,
                                                   uint32_t tbs); 
 
 
-#endif
+#endif

srslte/include/srslte/phch/pbch.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         pbch.h
+ *
+ *  Description:  Physical broadcast channel.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.6
+ *****************************************************************************/
 
 #ifndef PBCH_
 #define PBCH_
@@ -69,7 +76,7 @@ typedef struct SRSLTE_API {
   uint32_t frame_idx;
 
   /* tx & rx objects */
-  srslte_srslte_modem_table_t mod;
+  srslte_modem_table_t mod;
   srslte_demod_soft_t demod;
   srslte_sequence_t seq;
   srslte_viterbi_t decoder;

srslte/include/srslte/phch/pcfich.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         pcfich.h
+ *
+ *  Description:  Physical control format indicator channel
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.7
+ *****************************************************************************/
+
 #ifndef PCFICH_
 #define PCFICH_
 
@@ -64,7 +72,7 @@ typedef struct SRSLTE_API {
   float data_f[PCFICH_CFI_LEN]; 
 
   /* tx & rx objects */
-  srslte_srslte_modem_table_t mod;
+  srslte_modem_table_t mod;
   srslte_demod_soft_t demod;
   srslte_sequence_t seq[SRSLTE_NSUBFRAMES_X_FRAME];
   srslte_precoding_t precoding; 

srslte/include/srslte/phch/pdcch.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         pdcch.h
+ *
+ *  Description:  Physical downlink control channel.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.8
+ *****************************************************************************/
+
 #ifndef PDCCH_
 #define PDCCH_
 
@@ -69,7 +77,7 @@ typedef struct SRSLTE_API {
   float *llr;
 
   /* tx & rx objects */
-  srslte_srslte_modem_table_t mod;
+  srslte_modem_table_t mod;
   srslte_demod_soft_t demod;
   srslte_sequence_t seq[SRSLTE_NSUBFRAMES_X_FRAME];
   srslte_viterbi_t decoder;

srslte/include/srslte/phch/pdsch.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         pdsch.h
+ *
+ *  Description:  Physical downlink shared channel
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.4
+ *****************************************************************************/
 
 #ifndef PDSCH_
 #define PDSCH_
@@ -62,7 +69,7 @@ typedef struct SRSLTE_API {
   void *e;
 
   /* tx & rx objects */
-  srslte_srslte_modem_table_t mod[4];
+  srslte_modem_table_t mod[4];
   srslte_demod_soft_t demod;
   srslte_sequence_t seq[SRSLTE_NSUBFRAMES_X_FRAME];
   srslte_precoding_t precoding; 

srslte/include/srslte/phch/phich.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         phich.h
+ *
+ *  Description:  Physical Hybrid ARQ indicator channel.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.9
+ *****************************************************************************/
 
 #ifndef PHICH_
 #define PHICH_
@@ -76,7 +83,7 @@ typedef struct SRSLTE_API {
   uint8_t data[SRSLTE_PHICH_NBITS];
 
   /* tx & rx objects */
-  srslte_srslte_modem_table_t mod;
+  srslte_modem_table_t mod;
   srslte_demod_hard_t demod;
   srslte_sequence_t seq[SRSLTE_NSUBFRAMES_X_FRAME];
   srslte_precoding_t precoding; 

srslte/include/srslte/phch/prach.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         prach.h
+ *
+ *  Description:  Physical random access channel.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 5.7
+ *****************************************************************************/
+
 #ifndef PRACH_
 #define PRACH_
 

srslte/include/srslte/phch/pucch.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         pucch.h
+ *
+ *  Description:  Physical uplink control channel.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 5.4
+ *****************************************************************************/
 
 #ifndef PUCCH_
 #define PUCCH_

srslte/include/srslte/phch/pusch.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         pusch.h
+ *
+ *  Description:  Physical uplink shared channel.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 5.3
+ *****************************************************************************/
 
 #ifndef PUSCH_
 #define PUSCH_
@@ -81,7 +88,7 @@ typedef struct SRSLTE_API {
   void *g;
 
   /* tx & rx objects */
-  srslte_srslte_modem_table_t mod[4];
+  srslte_modem_table_t mod[4];
   srslte_demod_soft_t demod;
   srslte_sequence_t seq[SRSLTE_NSUBFRAMES_X_FRAME];
   srslte_sequence_t seq_type2_fo; 

srslte/include/srslte/phch/ra.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         ra.h
+ *
+ *  Description:  Structures and utility functions for DL/UL resource allocation.
+ *
+ *  Reference:    3GPP TS 36.213 version 10.0.1 Release 10
+ *****************************************************************************/
+
 #ifndef RB_ALLOC_H_
 #define RB_ALLOC_H_
 
@@ -34,10 +42,6 @@
 #include "srslte/config.h"
 #include "srslte/common/phy_common.h"
 
-/** Structures and utility functions for DL/UL resource
- * allocation.
- */
-
 typedef struct SRSLTE_API {
   srslte_mod_t mod;
   int tbs;

srslte/include/srslte/phch/regs.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         regs.h
+ *
+ *  Description:  Resource element mapping functions.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10
+ *****************************************************************************/
 
 #ifndef _REGS_H_
 #define _REGS_H_

srslte/include/srslte/phch/sch.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         sch.h
+ *
+ *  Description:  Common UL and DL shared channel encode/decode functions.
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10
+ *****************************************************************************/
 
 #ifndef SCH_
 #define SCH_

srslte/include/srslte/phch/uci.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         uci.h
+ *
+ *  Description:  Uplink control information.
+ *
+ *  Reference:    3GPP TS 36.212 version 10.0.0 Release 10 Sec. 5.2.3, 5.2.4
+ *****************************************************************************/
 
 #ifndef UCI_
 #define UCI_
@@ -88,4 +95,4 @@ SRSLTE_API int srslte_uci_encode_ri(uint8_t data,
                                     uint8_t *q_bits); 
 
 
-#endif
+#endif

srslte/include/srslte/resampling/decim.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         decim.h
+ *
+ *  Description:  Integer linear decimation
+ *
+ *  Reference:
+ *****************************************************************************/
+
 #ifndef DECIM_H
 #define DECIM_H
 

srslte/include/srslte/resampling/interp.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         interp.h
+ *
+ *  Description:  Linear and vector interpolation
+ *
+ *  Reference:
+ *****************************************************************************/
+
 #ifndef INTERP_H
 #define INTERP_H
 

srslte/include/srslte/resampling/resample_arb.h

@@ -25,6 +25,16 @@
  *
  */
 
+/******************************************************************************
+ *  File:         resample_arb.h
+ *
+ *  Description:  Arbitrary rate resampler using a polyphase filter bank
+ *                implementation.
+ *
+ *  Reference:    Multirate Signal Processing for Communication Systems
+ *                fredric j. harris
+ *****************************************************************************/
+
 #ifndef RESAMPLE_ARB_
 #define RESAMPLE_ARB_
 

srslte/include/srslte/scrambling/scrambling.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         scrambling.h
+ *
+ *  Description:  Generic scrambling functions used by UL and DL channels.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 5.3.1, 6.3.1
+ *****************************************************************************/
 
 #ifndef SCRAMBLING_
 #define SCRAMBLING_

srslte/include/srslte/sync/cfo.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         cfo.h
+ *
+ *  Description:  Carrier frequency offset correction using complex exponentials.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef CFO_
 #define CFO_

srslte/include/srslte/sync/pss.h

@@ -25,6 +25,23 @@
  *
  */
 
+/******************************************************************************
+ *  File:         pss.h
+ *
+ *  Description:  Primary synchronization signal (PSS) generation and detection.
+ *
+ *                The srslte_pss_synch_t object provides functions for fast
+ *                computation of the crosscorrelation between the PSS and received
+ *                signal and CFO estimation. Also, the function srslte_pss_synch_tperiodic()
+ *                is designed to be called periodically every subframe, taking
+ *                care of the correct data alignment with respect to the PSS sequence.
+ *
+ *                The object is designed to work with signals sampled at 1.92 Mhz
+ *                centered at the carrier frequency. Thus, downsampling is required
+ *                if the signal is sampled at higher frequencies.
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.11.1
+ *****************************************************************************/
 
 #ifndef PSS_
 #define PSS_
@@ -50,17 +67,6 @@
 
 #define SRSLTE_PSS_RETURN_PSR  // If enabled returns peak to side-lobe ratio, otherwise returns absolute peak value
 
-/**
- * The srslte_pss_synch_t object provides functions for fast computation of the crosscorrelation
- * between the PSS and received signal and CFO estimation. Also, the function srslte_pss_synch_tperiodic() is designed
- * to be called periodically every subframe, taking care of the correct data alignment with respect
- * to the PSS sequence.
- *
- * The object is designed to work with signals sampled at 1.92 Mhz centered at the carrier frequency.
- * Thus, downsampling is required if the signal is sampled at higher frequencies.
- *
- */
-
 
 /* Low-level API */
 typedef struct SRSLTE_API {

srslte/include/srslte/sync/sfo.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         sfo.h
+ *
+ *  Description:  Sampling frequency offset estimation.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef SFO_
 #define SFO_

srslte/include/srslte/sync/sss.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         sss.h
+ *
+ *  Description:  Secondary synchronization signal (SSS) generation and detection.
+ *
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.11.2
+ *****************************************************************************/
 
 #ifndef SSS_
 #define SSS_

srslte/include/srslte/sync/sync.h

@@ -25,6 +25,23 @@
  *
  */
 
+/******************************************************************************
+ *  File:         sync.h
+ *
+ *  Description:  Time and frequency synchronization using the PSS and SSS signals.
+ *
+ *                The object is designed to work with signals sampled at 1.92 Mhz
+ *                centered at the carrier frequency. Thus, downsampling is required
+ *                if the signal is sampled at higher frequencies.
+ *
+ *                Correlation peak is detected comparing the maximum at the output
+ *                of the correlator with a threshold. The comparison accepts two
+ *                modes: absolute value or peak-to-mean ratio, which are configured
+ *                with the functions sync_pss_det_absolute() and sync_pss_det_peakmean().
+ *
+ *
+ *  Reference:    3GPP TS 36.211 version 10.0.0 Release 10 Sec. 6.11.1, 6.11.2
+ *****************************************************************************/
 
 #ifndef SYNC_
 #define SYNC_
@@ -40,18 +57,6 @@
 #define SRSLTE_SYNC_FFT_SZ_MIN    64
 #define SRSLTE_SYNC_FFT_SZ_MAX    2048
 
-/**
- *
- * This object performs time and frequency synchronization using the PSS and SSS signals.
- * 
- * The object is designed to work with signals sampled at 1.92 Mhz centered at the carrier frequency.
- * Thus, downsampling is required if the signal is sampled at higher frequencies.
- *
- * Correlation peak is detected comparing the maximum at the output of the correlator with a threshold.
- * The comparison accepts two modes: absolute value or peak-to-mean ratio, which are configured with the
- * functions sync_pss_det_absolute() and sync_pss_det_peakmean().
- */
-
 typedef enum {SSS_DIFF=0, SSS_PARTIAL_3=2, SSS_FULL=1} sss_alg_t; 
 
 typedef struct SRSLTE_API {

srslte/include/srslte/ue/ue_cell_search.h

@@ -25,6 +25,22 @@
  *
  */
 
+/******************************************************************************
+ *  File:         ue_cell_search.h
+ *
+ *  Description:  Wrapper for the ue_sync object.
+ *
+ *                This object is a wrapper to the ue_sync object. It receives
+ *                several synchronized frames and obtains the most common cell_id
+ *                and cp length.
+ *
+ *                The I/O stream device sampling frequency must be set to 1.92 MHz
+ *                (SRSLTE_CS_SAMP_FREQ constant) before calling to
+ *                srslte_ue_cellsearch_scan() functions.
+ *
+ *  Reference:
+ *****************************************************************************/
+
 #ifndef UE_CELLSEARCH_
 #define UE_CELLSEARCH_
 
@@ -38,17 +54,6 @@
 #include "srslte/phch/pbch.h"
 #include "srslte/dft/ofdm.h"
 
-/************************************************************
- * 
- * This object is a wrapper to the ue_sync object. It receives
- * several synchronized frames and obtains the most common cell_id 
- * and cp length. 
- * 
- * The I/O stream device sampling frequency must be set to 1.92 MHz (SRSLTE_CS_SAMP_FREQ constant)
- * before calling to srslte_ue_cellsearch_scan() functions. 
- * 
- ************************************************************/
-
 /** 
  * TODO: Check also peak offset 
  */

srslte/include/srslte/ue/ue_dl.h

@@ -25,17 +25,20 @@
  *
  */
 
+/******************************************************************************
+ *  File:         ue_dl.h
+ *
+ *  Description:  UE downlink object.
+ *
+ *                This module is a frontend to all the downlink data and control
+ *                channel processing modules.
+ *
+ *  Reference:
+ *****************************************************************************/
+
 #ifndef UEDL_H
 #define UEDL_H
 
-/*******************************************************
- * 
- * This module is a frontend to all the data and control channels processing 
- * modules. 
- ********************************************************/
-
-
-
 #include "srslte/ch_estimation/chest_dl.h"
 #include "srslte/dft/ofdm.h"
 #include "srslte/common/phy_common.h"
@@ -126,4 +129,4 @@ SRSLTE_API void srslte_ue_dl_reset(srslte_ue_dl_t *q);
 SRSLTE_API void srslte_ue_dl_set_rnti(srslte_ue_dl_t *q, 
                                       uint16_t rnti);
 
-#endif
+#endif

srslte/include/srslte/ue/ue_mib.h

@@ -25,27 +25,28 @@
  *
  */
 
+/******************************************************************************
+ *  File:         ue_mib.h
+ *
+ *  Description:  This object decodes the MIB from the PBCH of an LTE signal.
+ *
+ *                The function srslte_ue_mib_decode() shall be called multiple
+ *                times, each passing a number of samples multiple of 19200,
+ *                sampled at 1.92 MHz (that is, 10 ms of samples).
+ *
+ *                The function uses the sync_t object to find the PSS sequence and
+ *                decode the PBCH to obtain the MIB.
+ *
+ *                The function returns 0 until the MIB is decoded.
+ *
+ *                See ue_cell_detect.c for an example.
+ *
+ *  Reference:
+ *****************************************************************************/
+
 #ifndef UE_MIB_
 #define UE_MIB_
 
-
-/************************************************************
- * 
- * This object decodes the MIB from the PBCH of an LTE signal. 
- * 
- * The function srslte_ue_mib_decode() shall be called multiple times, 
- * each passing a number of samples multiple of 19200, sampled at 1.92 MHz
- * (that is, 10 ms of samples). 
- * 
- * The function uses the sync_t object to find the PSS sequence and 
- * decode the PBCH to obtain the MIB. 
- * 
- * The function returns 0 until the MIB is decoded. 
- * 
- * See ue_cell_detect.c for an example. 
- * 
- ************************************************************/
-
 #include <stdbool.h>
 
 #include "srslte/config.h"

srslte/include/srslte/ue/ue_phy.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         ue_phy.h
+ *
+ *  Description:  Top-level class wrapper for PHY layer.
+ *
+ *  Reference:
+ *****************************************************************************/
+
 #include "srslte/srslte.h"
 #include "srslte/utils/queue.h"
 
@@ -158,4 +166,4 @@ private:
 };
 
 }
-#endif
+#endif

srslte/include/srslte/ue/ue_sync.h

@@ -25,6 +25,28 @@
  *
  */
 
+/******************************************************************************
+ *  File:         ue_sync.h
+ *
+ *  Description:  This object automatically manages the cell synchronization
+ *                procedure.
+ *
+ *                The main function is srslte_ue_sync_get_buffer(), which returns
+ *                a pointer to the aligned subframe of samples (before FFT). This
+ *                function should be called regularly, returning every 1 ms.
+ *                It reads from the USRP, aligns the samples to the subframe and
+ *                performs time/freq synch.
+ *
+ *                It is also possible to read the signal from a file using the
+ *                init function srslte_ue_sync_init_file(). The sampling frequency
+ *                is derived from the number of PRB.
+ *
+ *                The function returns 1 when the signal is correctly acquired and
+ *                the returned buffer is aligned with the subframe.
+ *
+ *  Reference:
+ *****************************************************************************/
+
 #ifndef UE_SYNC_
 #define UE_SYNC_
 
@@ -39,22 +61,6 @@
 #include "srslte/common/timestamp.h"
 #include "srslte/io/filesource.h"
 
-/**************************************************************
- *
- * This object automatically manages the cell synchronization procedure. 
- * 
- * The main function is srslte_ue_sync_get_buffer(), which returns a pointer
- * to the aligned subframe of samples (before FFT). This function
- * should be called regularly, returning every 1 ms. It reads from the 
- * USRP, aligns the samples to the subframe and performs time/freq synch. 
- *
- * It is also possible to read the signal from a file using the init function 
- * srslte_ue_sync_init_file(). The sampling frequency is derived from the number of PRB. 
- * 
- * The function returns 1 when the signal is correctly acquired and the 
- * returned buffer is aligned with the subframe. 
- * 
- *************************************************************/
 
 typedef enum SRSLTE_API { SF_FIND, SF_TRACK} srslte_ue_sync_state_t;
 

srslte/include/srslte/ue/ue_ul.h

@@ -25,16 +25,20 @@
  *
  */
 
+/******************************************************************************
+ *  File:         ue_ul.h
+ *
+ *  Description:  UE uplink object.
+ *
+ *                This module is a frontend to all the uplink data and control
+ *                channel processing modules.
+ *
+ *  Reference:
+ *****************************************************************************/
+
 #ifndef UEUL_H
 #define UEUL_H
 
-/*******************************************************
- * 
- * This module is a frontend to all the data and control channels processing 
- * modules. 
- ********************************************************/
-
-
 #include "srslte/common/phy_common.h"
 #include "srslte/ch_estimation/chest_dl.h"
 #include "srslte/dft/ofdm.h"
@@ -119,4 +123,4 @@ SRSLTE_API void srslte_ue_ul_reset(srslte_ue_ul_t *q);
 SRSLTE_API void srslte_ue_ul_set_rnti(srslte_ue_ul_t *q, 
                                       uint16_t rnti);
 
-#endif
+#endif

srslte/include/srslte/utils/bit.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         bit.h
+ *
+ *  Description:  Bit-level utilities.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef BIT_
 #define BIT_

srslte/include/srslte/utils/cexptab.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         cexptab.h
+ *
+ *  Description:  Utility module for generation of complex exponential tables.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef CEXPTAB_
 #define CEXPTAB_

srslte/include/srslte/utils/convolution.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         convolution.h
+ *
+ *  Description:  Utility module for fast convolution using FFT.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef CONVOLUTION_H_
 #define CONVOLUTION_H_

srslte/include/srslte/utils/debug.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         debug.h
+ *
+ *  Description:  Debug output utilities.
+ *
+ *  Reference:
+ *****************************************************************************/
+
 #ifndef DEBUG_H
 #define DEBUG_H
 

srslte/include/srslte/utils/queue.h

@@ -25,6 +25,14 @@
  *
  */
 
+/******************************************************************************
+ *  File:         queue.h
+ *
+ *  Description:  Queue used at interface of PHY/MAC
+ *
+ *  Reference:
+ *****************************************************************************/
+
 #ifndef QUEUE_H
 #define QUEUE_H
 
@@ -83,4 +91,4 @@ private:
 
 }
   
-#endif
+#endif

srslte/include/srslte/utils/vector.h

@@ -25,6 +25,13 @@
  *
  */
 
+/******************************************************************************
+ *  File:         vector.h
+ *
+ *  Description:  Vector functions using SIMD instructions where possible.
+ *
+ *  Reference:
+ *****************************************************************************/
 
 #ifndef VECTOR_
 #define VECTOR_

srslte/lib/modem/src/demod_soft.c

@@ -71,7 +71,7 @@ void srslte_demod_soft_free(srslte_demod_soft_t *q) {
   bzero((void*)q,sizeof(srslte_demod_soft_t));
 }
 
-void srslte_demod_soft_table_set(srslte_demod_soft_t *q, srslte_srslte_modem_table_t *table) {
+void srslte_demod_soft_table_set(srslte_demod_soft_t *q, srslte_modem_table_t *table) {
   q->table = table;
 }
 

srslte/lib/modem/src/mod.c

@@ -35,7 +35,7 @@
 
 /** Low-level API */
 
-int srslte_mod_modulate(srslte_srslte_modem_table_t* q, uint8_t *bits, cf_t* symbols, uint32_t nbits) {
+int srslte_mod_modulate(srslte_modem_table_t* q, uint8_t *bits, cf_t* symbols, uint32_t nbits) {
   uint32_t i,j,idx;
   uint8_t *b_ptr=(uint8_t*) bits;
   j=0;

srslte/lib/modem/src/modem_table.c

@@ -38,26 +38,26 @@
 #include "lte_tables.h"
 
 /** Internal functions */
-static int table_create(srslte_srslte_modem_table_t* q) {
+static int table_create(srslte_modem_table_t* q) {
   q->symbol_table = malloc(q->nsymbols*sizeof(cf_t));
   return q->symbol_table==NULL;
 }
 
-void srslte_modem_table_init(srslte_srslte_modem_table_t* q) {
+void srslte_modem_table_init(srslte_modem_table_t* q) {
-  bzero((void*)q,sizeof(srslte_srslte_modem_table_t));
+  bzero((void*)q,sizeof(srslte_modem_table_t));
 }
-void srslte_modem_table_free(srslte_srslte_modem_table_t* q) {
+void srslte_modem_table_free(srslte_modem_table_t* q) {
   if (q->symbol_table) {
     free(q->symbol_table);
   }
-  bzero(q, sizeof(srslte_srslte_modem_table_t));
+  bzero(q, sizeof(srslte_modem_table_t));
 }
-void srslte_modem_table_reset(srslte_srslte_modem_table_t* q) {
+void srslte_modem_table_reset(srslte_modem_table_t* q) {
   srslte_modem_table_free(q);
   srslte_modem_table_init(q);
 }
 
-int srslte_modem_table_set(srslte_srslte_modem_table_t* q, cf_t* table, srslte_soft_table_t *soft_table, uint32_t nsymbols, uint32_t nbits_x_symbol) {
+int srslte_modem_table_set(srslte_modem_table_t* q, cf_t* table, srslte_soft_table_t *soft_table, uint32_t nsymbols, uint32_t nbits_x_symbol) {
   if (q->nsymbols) {
     return SRSLTE_ERROR;
   }
@@ -71,7 +71,7 @@ int srslte_modem_table_set(srslte_srslte_modem_table_t* q, cf_t* table, srslte_s
   return SRSLTE_SUCCESS;
 }
 
-int srslte_modem_table_lte(srslte_srslte_modem_table_t* q, srslte_mod_t modulation, bool compute_soft_demod) {
+int srslte_modem_table_lte(srslte_modem_table_t* q, srslte_mod_t modulation, bool compute_soft_demod) {
   switch(modulation) {
   case SRSLTE_MOD_BPSK:
     q->nbits_x_symbol = 1;

srslte/lib/modem/test/modem_test.c

@@ -94,7 +94,7 @@ void parse_args(int argc, char **argv) {
 
 int main(int argc, char **argv) {
   int i;
-  srslte_srslte_modem_table_t mod;
+  srslte_modem_table_t mod;
   srslte_demod_hard_t demod_hard;
   srslte_demod_soft_t demod_soft;
   uint8_t *input, *output;

srslte/lib/modem/test/soft_demod_test.c

@@ -108,7 +108,7 @@ float mse_threshold() {
 
 int main(int argc, char **argv) {
   int i;
-  srslte_srslte_modem_table_t mod;
+  srslte_modem_table_t mod;
   srslte_demod_soft_t demod_soft;
   uint8_t *input, *output;
   cf_t *symbols;