You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

364 lines
13 KiB
C

/**
*
* \section COPYRIGHT
*
* Copyright 2013-2020 Software Radio Systems Limited
*
* By using this file, you agree to the terms and conditions set
* forth in the LICENSE file which can be found at the top level of
* the distribution.
*
*/
#ifndef SRSLTE_PHY_COMMON_NR_H
#define SRSLTE_PHY_COMMON_NR_H
#include "phy_common.h"
#include <inttypes.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Defines the number of symbols per slot. Defined by TS 38.211 v15.8.0 Table 4.3.2-1.
*/
#define SRSLTE_NSYMB_PER_SLOT_NR 14U
/**
* @brief Defines the resource grid size in physical resource elements (frequency and time domain)
*/
#define SRSLTE_SLOT_LEN_RE_NR(nof_prb) (nof_prb * SRSLTE_NRE * SRSLTE_NSYMB_PER_SLOT_NR)
#define SRSLTE_SLOT_MAX_LEN_RE_NR (SRSLTE_SLOT_LEN_RE_NR(SRSLTE_MAX_PRB_NR))
#define SRSLTE_SLOT_MAX_NOF_BITS_NR (SRSLTE_SLOT_MAX_LEN_RE_NR * SRSLTE_MAX_QM)
#define SRSLTE_MAX_LAYERS_NR 8
/**
* @brief Defines the maximum numerology supported. Defined by TS 38.211 v15.8.0 Table 4.3.2-1.
*/
#define SRSLTE_NR_MAX_NUMEROLOGY 4U
/**
* @brief Defines the symbol duration, including cyclic prefix
*/
#define SRSLTE_SUBC_SPACING_NR(NUM) (15000U << (NUM))
/**
* @brief Defines the number of slots per SF. Defined by TS 38.211 v15.8.0 Table 4.3.2-1.
*/
#define SRSLTE_NSLOTS_PER_SF_NR(NUM) (1U << (NUM))
/**
* @brief Defines the number of slots per frame. Defined by TS 38.211 v15.8.0 Table 4.3.2-1.
*/
#define SRSLTE_NSLOTS_PER_FRAME_NR(NUM) (SRSLTE_NSLOTS_PER_SF_NR(NUM) * SRSLTE_NOF_SF_X_FRAME)
/**
* @brief Bounds slot index into the frame
*/
#define SRSLTE_SLOT_NR_MOD(NUM, N) ((N) % SRSLTE_NSLOTS_PER_FRAME_NR(NUM))
/**
* @brief Maximum Carrier identification value. Defined by TS 38.331 v15.10.0 as PhysCellId from 0 to 1007.
*/
#define SRSLTE_MAX_ID_NR 1007
/**
* @brief Maximum number of physical resource blocks (PRB) that a 5G NR can have. This is defined by TS 38.331 v15.10.0
* as maxNrofPhysicalResourceBlocks
*/
#define SRSLTE_MAX_PRB_NR 275
/**
* @brief Maximum start sub-carrier index for the carrier relative point
*/
#define SRSLTE_MAX_START_NR 2199
/**
* @brief defines the maximum number of Aggregation levels: 1, 2, 4, 8 and 16
*/
#define SRSLTE_SEARCH_SPACE_NOF_AGGREGATION_LEVELS_NR 5
/**
* @brief defines the maximum number of RE
*/
#define SRSLTE_PDCCH_MAX_RE ((SRSLTE_NRE - 3U) * (1U << (SRSLTE_SEARCH_SPACE_NOF_AGGREGATION_LEVELS_NR - 1U)) * 6U)
/**
* @brief defines the maximum number of candidates for a given Aggregation level
*/
#define SRSLTE_SEARCH_SPACE_MAX_NOF_CANDIDATES_NR 8
/**
* @brief defines the maximum number of resource elements per PRB
* @remark Defined in TS 38.214 V15.10.0 5.1.3.2 Transport block size determination, point 1, second bullet
*/
#define SRSLTE_MAX_NRE_NR 156
/**
* @brief defines the maximum number of resource elements in a PDSCH transmission
* @remark deduced from in TS 36.214 V15.10.0 5.1.3.2 Transport block size determination
*/
#define SRSLTE_PDSCH_MAX_RE_NR (SRSLTE_MAX_NRE_NR * SRSLTE_MAX_PRB_NR)
/**
* @brief Maximum number of PDSCH time domain resource allocations. This is defined by TS 38.331 v15.10.0
* as maxNrofDL-Allocations
*/
#define SRSLTE_MAX_NOF_DL_ALLOCATION 16
typedef enum SRSLTE_API {
srslte_coreset_mapping_type_non_interleaved = 0,
srslte_coreset_mapping_type_interleaved,
} srslte_coreset_mapping_type_t;
typedef enum SRSLTE_API {
srslte_coreset_bundle_size_n2 = 0,
srslte_coreset_bundle_size_n3,
srslte_coreset_bundle_size_n6,
} srslte_coreset_bundle_size_t;
typedef enum SRSLTE_API {
srslte_coreset_precoder_granularity_contiguous = 0,
srslte_coreset_precoder_granularity_reg_bundle
} srslte_coreset_precoder_granularity_t;
/**
* @brief PDSCH mapping type
* @remark Described in TS 38.331 V15.10.0 Section PDSCH-TimeDomainResourceAllocationList
*/
typedef enum SRSLTE_API { srslte_sch_mapping_type_A = 0, srslte_sch_mapping_type_B } srslte_sch_mapping_type_t;
/**
* @brief Search spaces
* @remark Described in TS 38.213 V15.10.0 Section 10.1 UE procedure for determining physical downlink control channel
* assignment
*/
typedef enum SRSLTE_API {
srslte_search_space_type_common_0 = 0, ///< configured by pdcch-ConfigSIB1 in MIB or by searchSpaceSIB1 in
///< PDCCH-ConfigCommon or by searchSpaceZero in PDCCH-ConfigCommon
srslte_search_space_type_common_0A, ///< configured by searchSpaceOtherSystemInformation in PDCCH-ConfigCommon
srslte_search_space_type_common_1, ///< configured by ra-SearchSpace in PDCCH-ConfigCommon
srslte_search_space_type_common_2, ///< configured by pagingSearchSpace in PDCCH-ConfigCommon
srslte_search_space_type_common_3, ///< configured by SearchSpace in PDCCH-Config with searchSpaceType = common
srslte_search_space_type_ue, ///< configured by SearchSpace in PDCCH-Config with searchSpaceType = ue-Specific
srslte_search_space_rar ///< No search space associated, used for grants given by Random Access Response (RAR)
} srslte_search_space_type_t;
/**
* @brief Helper macro to get if a search space type is common or not
*/
#define SRSLTE_SEARCH_SPACE_IS_COMMON(SS_TYPE) ((SS_TYPE) < srslte_search_space_type_ue)
/**
* @brief RAR content length in bits (see TS 38.321 Sec 6.2.3)
*/
#define SRSLTE_RAR_UL_GRANT_NBITS (27)
/**
* @brief Indicates the MCS table the UE shall use for PDSCH and/or PUSCH without transform precoding
*/
typedef enum SRSLTE_API {
srslte_mcs_table_64qam = 0,
srslte_mcs_table_256qam,
srslte_mcs_table_qam64LowSE,
srslte_mcs_table_N
} srslte_mcs_table_t;
/**
* @brief RNTI types
*/
typedef enum SRSLTE_API {
srslte_rnti_type_c = 0,
srslte_rnti_type_p,
srslte_rnti_type_si,
srslte_rnti_type_ra,
srslte_rnti_type_tc,
srslte_rnti_type_cs,
srslte_rnti_type_sp_csi,
srslte_rnti_type_mcs_c,
} srslte_rnti_type_t;
/**
* @brief DCI formats
* @remark Described in TS 38.212 V15.9.0 Section 7.3.1 DCI formats
*/
typedef enum SRSLTE_API {
srslte_dci_format_nr_0_0 = 0, ///< @brief Scheduling of PUSCH in one cell
srslte_dci_format_nr_0_1, ///< @brief Scheduling of PUSCH in one cell
srslte_dci_format_nr_1_0, ///< @brief Scheduling of PDSCH in one cell
srslte_dci_format_nr_1_1, ///< @brief Scheduling of PDSCH in one cell
srslte_dci_format_nr_2_0, ///< @brief Notifying a group of UEs of the slot format
srslte_dci_format_nr_2_1, ///< @brief Notifying a group of UEs of the PRB(s) and OFDM symbol(s) where UE may assume no
///< transmission is intended for the UE
srslte_dci_format_nr_2_2, ///< @brief Transmission of TPC commands for PUCCH and PUSCH
srslte_dci_format_nr_2_3, ///< @brief Transmission of a group of TPC commands for SRS transmissions by one or more UEs
srslte_dci_format_nr_rar, ///< @brief Scheduling a transmission of PUSCH from RAR
srslte_dci_format_nr_cg ///< @brief Scheduling of PUSCH using a configured grant
} srslte_dci_format_nr_t;
/**
* @brief Overhead configuration provided by higher layers
* @remark Described in TS 38.331 V15.10.0 PDSCH-ServingCellConfig
* @remark Described in TS 38.331 V15.10.0 PUSCH-ServingCellConfig
*/
typedef enum SRSLTE_API {
srslte_xoverhead_0 = 0,
srslte_xoverhead_6,
srslte_xoverhead_12,
srslte_xoverhead_18
} srslte_xoverhead_t;
/**
* @brief NR carrier parameters. It is a combination of fixed cell and bandwidth-part (BWP)
*/
typedef struct SRSLTE_API {
uint32_t id;
uint32_t numerology;
uint32_t nof_prb;
uint32_t start;
uint32_t max_mimo_layers; ///< @brief DL: Indicates the maximum number of MIMO layers to be used for PDSCH in all BWPs
///< of this serving cell. (see TS 38.212 [17], clause 5.4.2.1). UL: Indicates the maximum
///< MIMO layer to be used for PUSCH in all BWPs of the normal UL of this serving cell (see
///< TS 38.212 [17], clause 5.4.2.1)
} srslte_carrier_nr_t;
/**
* @brief NR Slot parameters. It contains parameters that change in a slot basis.
*/
typedef struct SRSLTE_API {
/// Slot index in the radio frame
uint32_t idx;
/// Left for future parameters
/// ...
} srslte_slot_cfg_t;
/**
* @brief Min number of OFDM symbols in a control resource set.
*/
#define SRSLTE_CORESET_DURATION_MIN 1
/**
* @brief Max number of OFDM symbols in a control resource set. Specified in TS 38.331 V15.10.0 as maxCoReSetDuration
*/
#define SRSLTE_CORESET_DURATION_MAX 3
/**
* @brief Number of possible CORESET frequency resources.
*/
#define SRSLTE_CORESET_FREQ_DOMAIN_RES_SIZE 45
/**
* @brief Max value for shift index
*/
#define SRSLTE_CORESET_SHIFT_INDEX_MAX (SRSLTE_CORESET_NOF_PRB_MAX - 1)
/**
* @brief CORESET parameters as defined in TS 38.331 V15.10.0 - ControlResourceSet
*/
typedef struct SRSLTE_API {
uint32_t id;
uint32_t coreset_id;
srslte_coreset_mapping_type_t mapping_type;
uint32_t duration;
bool freq_resources[SRSLTE_CORESET_FREQ_DOMAIN_RES_SIZE];
srslte_coreset_bundle_size_t interleaver_size;
bool dmrs_scrambling_id_present;
uint32_t dmrs_scrambling_id;
srslte_coreset_precoder_granularity_t precoder_granularity;
srslte_coreset_bundle_size_t reg_bundle_size;
uint32_t shift_index;
/** Missing TCI parameters */
} srslte_coreset_t;
/**
* @brief SearchSpace parameters as defined in TS 38.331 v15.10.0 SearchSpace sequence
*/
typedef struct SRSLTE_API {
uint32_t id;
uint32_t coreset_id;
uint32_t duration; // in slots
srslte_search_space_type_t type;
uint32_t nof_candidates[SRSLTE_SEARCH_SPACE_NOF_AGGREGATION_LEVELS_NR];
} srslte_search_space_t;
/**
* @brief Get the RNTI type name for NR
* @param rnti_type RNTI type name
* @return Constant string with the RNTI type name
*/
SRSLTE_API const char* srslte_rnti_type_str(srslte_rnti_type_t rnti_type);
/**
* @brief Calculates the bandwidth of a given CORESET in physical resource blocks (PRB) . This function uses the
* frequency domain resources bit-map for counting the number of PRB.
*
* @attention Prior to this function call, the frequency domain resources bit-map shall be zeroed beyond the
* carrier.nof_prb / 6 index, otherwise the CORESET bandwidth might be greater than the carrier.
*
* @param coreset provides the given CORESET configuration
* @return The number of PRB that the CORESET takes in frequency domain
*/
SRSLTE_API uint32_t srslte_coreset_get_bw(const srslte_coreset_t* coreset);
/**
* @brief Calculates the number of Physical Resource Elements (time and frequency domain) that a given CORESET uses.
* This function uses the frequency domain resources bit-map and duration to compute the number of symbols.
*
* @attention Prior to this function call, the frequency domain resources bit-map shall be zeroed beyond the
* carrier.nof_prb / 6 index, otherwise the CORESET bandwidth might be greater than the carrier.
*
* @param coreset provides the given CORESET configuration
* @return The number of resource elements that compose the coreset
*/
SRSLTE_API uint32_t srslte_coreset_get_sz(const srslte_coreset_t* coreset);
/**
* @brief Get the NR PDSCH mapping type in string
* @param mapping_type Mapping type
* @return Constant string with PDSCH mapping type
*/
SRSLTE_API const char* srslte_sch_mapping_type_to_str(srslte_sch_mapping_type_t mapping_type);
/**
* @brief Get the MCS table string
* @param mcs_table MCS table value
* @return Constant string with the MCS table name
*/
SRSLTE_API const char* srslte_mcs_table_to_str(srslte_mcs_table_t mcs_table);
/**
* @brief Get the MCS table value from a string
* @param str Points to a given string
* @return The MCS table value
*/
SRSLTE_API srslte_mcs_table_t srslte_mcs_table_from_str(const char* str);
/**
* @brief Computes the minimum valid symbol size for a given amount of PRB
* @attention The valid FFT sizes are radix 2 and radix 3 between 128 to 4096 points.
* @param nof_prb Number of PRB
* @return The minimum valid FFT size if the number of PRB is in range, 0 otherwise
*/
SRSLTE_API uint32_t srslte_min_symbol_sz_rb(uint32_t nof_prb);
/**
* @brief Computes the time in seconds between two symbols in a slot
* @note l0 is expected to be smaller than l1
* @remark All symbol size reference and values are taken from TS 38.211 section 5.3 OFDM baseband signal generation
* @param l0 First symbol index within the slot
* @param l1 Second symbol index within the slot
* @param numerology NR Carrier numerology
* @return Returns the time in seconds between the two symbols if the condition above is satisfied, 0 seconds otherwise
*/
SRSLTE_API float srslte_symbol_distance_s(uint32_t l0, uint32_t l1, uint32_t numerology);
#ifdef __cplusplus
}
#endif
#endif // SRSLTE_PHY_COMMON_NR_H