You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
srsRAN_4G/srsue/hdr/phy/scell/intra_measure_nr.h

132 lines
4.4 KiB
C++

/**
*
* \section COPYRIGHT
*
* Copyright 2013-2021 Software Radio Systems Limited
*
* By using this file, you agree to the terms and conditions set
* forth in the LICENSE file which can be found at the top level of
* the distribution.
*
*/
#ifndef SRSRAN_INTRA_MEASURE_NR_H
#define SRSRAN_INTRA_MEASURE_NR_H
#include "intra_measure_base.h"
#include <srsran/srsran.h>
namespace srsue {
namespace scell {
/**
* @brief Describes a class for performing LTE intra-frequency cell search and measurement
*/
class intra_measure_nr : public intra_measure_base
{
public:
/**
* @brief Describes initialization arguments. It is used to preallocate all memory and avoiding performing memory
* allocation when the configuration is set
*/
struct args_t {
float rx_gain_offset_dB = 0.0f;
uint32_t max_len_ms = 1;
double max_srate_hz = 61.44e6;
srsran_subcarrier_spacing_t min_scs = srsran_subcarrier_spacing_15kHz;
float thr_snr_db = 5.0f; ///< minimum SNR threshold
};
/**
* @brief Describes the required configuration arguments to start measurements
*/
struct config_t : public intra_measure_base::args_t {
/// Additional fields to the base arguments
uint32_t arfcn; ///< Carrier frequency in ARFCN
double center_freq_hz = 0.0; ///< Base-band center frequency in Hz
double ssb_freq_hz = 0.0; ///< SSB center frequency
srsran_subcarrier_spacing_t scs = srsran_subcarrier_spacing_30kHz; ///< SSB configured Subcarrier spacing
int serving_cell_pci = -1; ///< Current serving cell PCI, set to -1 if no
///< serving cell has been configured for this
///< carrier
};
/**
* @brief Constructor
* @param logger Logging object
* @param new_meas_itf_ Interface to report measurement to higher layers
*/
intra_measure_nr(srslog::basic_logger& logger, meas_itf& new_meas_itf_);
/**
* @brief Destructor
*/
~intra_measure_nr() override;
/**
* @brief Initialises LTE specific measurement objects
* @param args Configuration arguments
* @return True if initialization is successful, false otherwise
*/
bool init(uint32_t cc_idx, const args_t& args);
/**
* @brief Sets the primary cell and selects NR operation mode, configures the cell bandwidth and sampling rate
* @param cfg Actual configuration
* @return True if configuration is successful, false otherwise
*/
bool set_config(const config_t& cfg);
/**
* @brief Get current frequency number
* @return the current ARFCN
*/
uint32_t get_earfcn() const override { return current_arfcn; };
/**
* @brief Computes the average measurement performance since last configuration
* @return The performance in Millions of samples per second
*/
uint32_t get_perf() const
{
if (perf_count_us == 0) {
return 0;
}
return (uint32_t)(perf_count_samples / perf_count_us);
};
private:
/**
* @brief Provides with the RAT to the base class
* @return The RAT measured by this class which is NR
*/
srsran::srsran_rat_t get_rat() const override { return srsran::srsran_rat_t::nr; }
/**
* @brief NR specific measurement process
* @attention It searches and measures the SSB with best SNR
* @param context Measurement context
* @param buffer Provides the baseband buffer to perform the measurements
* @param rx_gain_offset Provides last received rx_gain_offset
* @return True if no error happen, otherwise false
*/
bool measure_rat(measure_context_t context, std::vector<cf_t>& buffer, float rx_gain_offset) override;
srslog::basic_logger& logger;
uint32_t cc_idx = 0;
uint32_t current_arfcn = 0;
float thr_snr_db = 5.0f;
int serving_cell_pci = -1;
/// Performance
uint64_t perf_count_us = 0; ///< Counts execution time in microseconds
uint64_t perf_count_samples = 0; ///< Counts the number samples
/// NR-based measuring objects
srsran_ssb_t ssb = {}; ///< SS/PBCH Block
};
} // namespace scell
} // namespace srsue
#endif // SRSRAN_INTRA_MEASURE_NR_H