mirror of https://github.com/pvnis/srsRAN_4G.git
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
394 lines
16 KiB
Plaintext
394 lines
16 KiB
Plaintext
#####################################################################
|
|
# srsUE configuration file
|
|
#####################################################################
|
|
|
|
#####################################################################
|
|
# RF configuration
|
|
#
|
|
# dl_earfcn: Downlink EARFCN code.
|
|
# freq_offset: Uplink and Downlink optional frequency offset (in Hz)
|
|
# tx_gain: Transmit gain (dB).
|
|
# rx_gain: Optional receive gain (dB). If disabled, AGC if enabled
|
|
#
|
|
# Optional parameters:
|
|
# dl_nr_arfcn: Downlink NR ARFCN for EN-DC
|
|
# dl_freq: Override DL frequency corresponding to dl_earfcn
|
|
# ul_freq: Override UL frequency corresponding to dl_earfcn
|
|
# nof_carriers: Number of carriers
|
|
# nof_antennas: Number of antennas per carrier (all carriers have the same number of antennas)
|
|
# device_name: Device driver family. Supported options: "auto" (uses first found), "UHD" or "bladeRF"
|
|
# device_args: Arguments for the device driver. Options are "auto" or any string.
|
|
# Default for UHD: "recv_frame_size=9232,send_frame_size=9232"
|
|
# Default for bladeRF: ""
|
|
# device_args_2: Arguments for the RF device driver 2.
|
|
# device_args_3: Arguments for the RF device driver 3.
|
|
# time_adv_nsamples: Transmission time advance (in number of samples) to compensate for RF delay
|
|
# from antenna to timestamp insertion.
|
|
# Default "auto". B210 USRP: 100 samples, bladeRF: 27.
|
|
# continuous_tx: Transmit samples continuously to the radio or on bursts (auto/yes/no).
|
|
# Default is auto (yes for UHD, no for rest)
|
|
#####################################################################
|
|
[rf]
|
|
dl_earfcn = 3350
|
|
#dl_nr_arfcn = 632628
|
|
freq_offset = 0
|
|
tx_gain = 80
|
|
#rx_gain = 40
|
|
|
|
#nof_carriers = 1
|
|
#nof_antennas = 1
|
|
|
|
# For best performance in 2x2 MIMO and >= 15 MHz use the following device_args settings:
|
|
# USRP B210: num_recv_frames=64,num_send_frames=64
|
|
|
|
# For best performance when BW<5 MHz (25 PRB), use the following device_args settings:
|
|
# USRP B210: send_frame_size=512,recv_frame_size=512
|
|
|
|
#device_args = auto
|
|
#time_adv_nsamples = auto
|
|
#continuous_tx = auto
|
|
|
|
# Example for ZMQ-based operation with TCP transport for I/Q samples
|
|
#device_name = zmq
|
|
#device_args = tx_port=tcp://*:2001,rx_port=tcp://localhost:2000,id=ue,base_srate=23.04e6
|
|
|
|
#####################################################################
|
|
# Packet capture configuration
|
|
#
|
|
# Packet capture is supported at the MAC, MAC_NR, and NAS layer.
|
|
# MAC-layer packets are captured to file a the compact format decoded
|
|
# by the Wireshark. For decoding, use the UDP dissector and the UDP
|
|
# heuristic dissection. Edit the preferences (Edit > Preferences >
|
|
# Protocols > DLT_USER) for DLT_USER to add an entry for DLT=149 with
|
|
# Protocol=udp. Further, enable the heuristic dissection in UDP under:
|
|
# Analyze > Enabled Protocols > MAC-LTE > mac_lte_udp and MAC-NR > mac_nr_udp
|
|
# For more information see: https://wiki.wireshark.org/MAC-LTE
|
|
# NAS-layer packets are dissected with DLT=148, and Protocol = nas-eps.
|
|
#
|
|
# enable: Enable packet captures of layers (mac/mac_nr/nas/none) multiple option list
|
|
# mac_filename: File path to use for MAC packet capture
|
|
# mac_nr_filename: File path to use for MAC NR packet capture
|
|
# nas_filename: File path to use for NAS packet capture
|
|
#####################################################################
|
|
[pcap]
|
|
enable = none
|
|
mac_filename = /tmp/ue_mac.pcap
|
|
mac_nr_filename = /tmp/ue_mac_nr.pcap
|
|
nas_filename = /tmp/ue_nas.pcap
|
|
|
|
#####################################################################
|
|
# Log configuration
|
|
#
|
|
# Log levels can be set for individual layers. "all_level" sets log
|
|
# level for all layers unless otherwise configured.
|
|
# Format: e.g. phy_level = info
|
|
#
|
|
# In the same way, packet hex dumps can be limited for each level.
|
|
# "all_hex_limit" sets the hex limit for all layers unless otherwise
|
|
# configured.
|
|
# Format: e.g. phy_hex_limit = 32
|
|
#
|
|
# Logging layers: rf, phy, mac, rlc, pdcp, rrc, nas, gw, usim, stack, all
|
|
# Logging levels: debug, info, warning, error, none
|
|
#
|
|
# filename: File path to use for log output. Can be set to stdout
|
|
# to print logs to standard output
|
|
# file_max_size: Maximum file size (in kilobytes). When passed, multiple files are created.
|
|
# If set to negative, a single log file will be created.
|
|
#####################################################################
|
|
[log]
|
|
all_level = warning
|
|
phy_lib_level = none
|
|
all_hex_limit = 32
|
|
filename = /tmp/ue.log
|
|
file_max_size = -1
|
|
|
|
#####################################################################
|
|
# USIM configuration
|
|
#
|
|
# mode: USIM mode (soft/pcsc)
|
|
# algo: Authentication algorithm (xor/milenage)
|
|
# op/opc: 128-bit Operator Variant Algorithm Configuration Field (hex)
|
|
# - Specify either op or opc (only used in milenage)
|
|
# k: 128-bit subscriber key (hex)
|
|
# imsi: 15 digit International Mobile Subscriber Identity
|
|
# imei: 15 digit International Mobile Station Equipment Identity
|
|
# pin: PIN in case real SIM card is used
|
|
# reader: Specify card reader by it's name as listed by 'pcsc_scan'. If empty, try all available readers.
|
|
#####################################################################
|
|
[usim]
|
|
mode = soft
|
|
algo = xor
|
|
#opc = 63BFA50EE6523365FF14C1F45F88737D
|
|
k = 00112233445566778899aabbccddeeff
|
|
imsi = 001010123456789
|
|
imei = 353490069873319
|
|
#reader =
|
|
#pin = 1234
|
|
|
|
#####################################################################
|
|
# RRC configuration
|
|
#
|
|
# ue_category: Sets UE category (range 1-5). Default: 4
|
|
# release: UE Release (8 to 10)
|
|
# feature_group: Hex value of the featureGroupIndicators field in the
|
|
# UECapabilityInformation message. Default 0xe6041000
|
|
# mbms_service_id: MBMS service id for autostarting MBMS reception
|
|
# (default -1 means disabled)
|
|
# mbms_service_port: Port of the MBMS service
|
|
#####################################################################
|
|
[rrc]
|
|
#ue_category = 4
|
|
#release = 8
|
|
#feature_group = 0xe6041000
|
|
#mbms_service_id = -1
|
|
#mbms_service_port = 4321
|
|
|
|
#####################################################################
|
|
# NAS configuration
|
|
#
|
|
# apn: Set Access Point Name (APN)
|
|
# apn_protocol: Set APN protocol (IPv4, IPv6 or IPv4v6.)
|
|
# user: Username for CHAP authentication
|
|
# pass: Password for CHAP authentication
|
|
# force_imsi_attach: Whether to always perform an IMSI attach
|
|
# eia: List of integrity algorithms included in UE capabilities
|
|
# Supported: 1 - Snow3G, 2 - AES
|
|
# eea: List of ciphering algorithms included in UE capabilities
|
|
# Supported: 0 - NULL, 1 - Snow3G, 2 - AES
|
|
#####################################################################
|
|
[nas]
|
|
#apn = internetinternet
|
|
#apn_protocol = ipv4
|
|
#user = srsuser
|
|
#pass = srspass
|
|
#force_imsi_attach = false
|
|
#eia = 1,2
|
|
#eea = 0,1,2
|
|
|
|
#####################################################################
|
|
# GW configuration
|
|
#
|
|
# netns: Network namespace to create TUN device. Default: empty
|
|
# ip_devname: Name of the tun_srsue device. Default: tun_srsue
|
|
# ip_netmask: Netmask of the tun_srsue device. Default: 255.255.255.0
|
|
#####################################################################
|
|
[gw]
|
|
#netns =
|
|
#ip_devname = tun_srsue
|
|
#ip_netmask = 255.255.255.0
|
|
|
|
#####################################################################
|
|
# GUI configuration
|
|
#
|
|
# Simple GUI displaying PDSCH constellation and channel freq response.
|
|
# (Requires building with srsGUI)
|
|
# enable: Enable the graphical interface (true/false)
|
|
#####################################################################
|
|
[gui]
|
|
enable = false
|
|
|
|
#####################################################################
|
|
# Channel emulator options:
|
|
# enable: Enable/Disable internal Downlink/Uplink channel emulator
|
|
#
|
|
# -- AWGN Generator
|
|
# awgn.enable: Enable/disable AWGN generator
|
|
# awgn.snr: SNR in dB
|
|
# awgn.signal_power: Received signal power in decibels full scale (dBfs)
|
|
#
|
|
# -- Fading emulator
|
|
# fading.enable: Enable/disable fading simulator
|
|
# fading.model: Fading model + maximum doppler (E.g. none, epa5, eva70, etu300, etc)
|
|
#
|
|
# -- Delay Emulator delay(t) = delay_min + (delay_max - delay_min) * (1 + sin(2pi*t/period)) / 2
|
|
# Maximum speed [m/s]: (delay_max - delay_min) * pi * 300 / period
|
|
# delay.enable: Enable/disable delay simulator
|
|
# delay.period_s: Delay period in seconds.
|
|
# delay.init_time_s: Delay initial time in seconds.
|
|
# delay.maximum_us: Maximum delay in microseconds
|
|
# delay.minumum_us: Minimum delay in microseconds
|
|
#
|
|
# -- Radio-Link Failure (RLF) Emulator
|
|
# rlf.enable: Enable/disable RLF simulator
|
|
# rlf.t_on_ms: Time for On state of the channel (ms)
|
|
# rlf.t_off_ms: Time for Off state of the channel (ms)
|
|
#
|
|
# -- High Speed Train Doppler model simulator
|
|
# hst.enable: Enable/Disable HST simulator
|
|
# hst.period_s: HST simulation period in seconds
|
|
# hst.fd_hz: Doppler frequency in Hz
|
|
# hst.init_time_s: Initial time in seconds
|
|
#####################################################################
|
|
[channel.dl]
|
|
#enable = false
|
|
|
|
[channel.dl.awgn]
|
|
#enable = false
|
|
#snr = 30
|
|
|
|
[channel.dl.fading]
|
|
#enable = false
|
|
#model = none
|
|
|
|
[channel.dl.delay]
|
|
#enable = false
|
|
#period_s = 3600
|
|
#init_time_s = 0
|
|
#maximum_us = 100
|
|
#minimum_us = 10
|
|
|
|
[channel.dl.rlf]
|
|
#enable = false
|
|
#t_on_ms = 10000
|
|
#t_off_ms = 2000
|
|
|
|
[channel.dl.hst]
|
|
#enable = false
|
|
#period_s = 7.2
|
|
#fd_hz = 750.0
|
|
#init_time_s = 0.0
|
|
|
|
[channel.ul]
|
|
#enable = false
|
|
|
|
[channel.ul.awgn]
|
|
#enable = false
|
|
#n0 = -30
|
|
|
|
[channel.ul.fading]
|
|
#enable = false
|
|
#model = none
|
|
|
|
[channel.ul.delay]
|
|
#enable = false
|
|
#period_s = 3600
|
|
#init_time_s = 0
|
|
#maximum_us = 100
|
|
#minimum_us = 10
|
|
|
|
[channel.ul.rlf]
|
|
#enable = false
|
|
#t_on_ms = 10000
|
|
#t_off_ms = 2000
|
|
|
|
[channel.ul.hst]
|
|
#enable = false
|
|
#period_s = 7.2
|
|
#fd_hz = -750.0
|
|
#init_time_s = 0.0
|
|
|
|
#####################################################################
|
|
# PHY configuration options
|
|
#
|
|
# rx_gain_offset: RX Gain offset to add to rx_gain to calibrate RSRP readings
|
|
# prach_gain: PRACH gain (dB). If defined, forces a gain for the tranmsission of PRACH only.,
|
|
# Default is to use tx_gain in [rf] section.
|
|
# cqi_max: Upper bound on the maximum CQI to be reported. Default 15.
|
|
# cqi_fixed: Fixes the reported CQI to a constant value. Default disabled.
|
|
# snr_ema_coeff: Sets the SNR exponential moving average coefficient (Default 0.1)
|
|
# snr_estim_alg: Sets the noise estimation algorithm. (Default refs)
|
|
# Options: pss: use difference between received and known pss signal,
|
|
# refs: use difference between noise references and noiseless (after filtering)
|
|
# empty: use empty subcarriers in the boarder of pss/sss signal
|
|
# pdsch_max_its: Maximum number of turbo decoder iterations (Default 4)
|
|
# pdsch_meas_evm: Measure PDSCH EVM, increases CPU load (default false)
|
|
# nof_phy_threads: Selects the number of PHY threads (maximum 4, minimum 1, default 3)
|
|
# equalizer_mode: Selects equalizer mode. Valid modes are: "mmse", "zf" or any
|
|
# non-negative real number to indicate a regularized zf coefficient.
|
|
# Default is MMSE.
|
|
# correct_sync_error: Channel estimator measures and pre-compensates time synchronization error. Increases CPU usage,
|
|
# improves PDSCH decoding in high SFO and high speed UE scenarios.
|
|
# sfo_ema: EMA coefficient to average sample offsets used to compute SFO
|
|
# sfo_correct_period: Period in ms to correct sample time to adjust for SFO
|
|
# sss_algorithm: Selects the SSS estimation algorithm. Can choose between
|
|
# {full, partial, diff}.
|
|
# estimator_fil_auto: The channel estimator smooths the channel estimate with an adaptative filter.
|
|
# estimator_fil_stddev: Sets the channel estimator smooth gaussian filter standard deviation.
|
|
# estimator_fil_order: Sets the channel estimator smooth gaussian filter order (even values perform better).
|
|
# The taps are [w, 1-2w, w]
|
|
#
|
|
# snr_to_cqi_offset: Sets an offset in the SNR to CQI table. This is used to adjust the reported CQI.
|
|
#
|
|
# interpolate_subframe_enabled: Interpolates in the time domain the channel estimates within 1 subframe. Default is to average.
|
|
#
|
|
# pdsch_csi_enabled: Stores the Channel State Information and uses it for weightening the softbits. It is only
|
|
# used in TM1. It is True by default.
|
|
#
|
|
# pdsch_8bit_decoder: Use 8-bit for LLR representation and turbo decoder trellis computation (Experimental)
|
|
# force_ul_amplitude: Forces the peak amplitude in the PUCCH, PUSCH and SRS (set 0.0 to 1.0, set to 0 or negative for disabling)
|
|
#
|
|
# in_sync_rsrp_dbm_th: RSRP threshold (in dBm) above which the UE considers to be in-sync
|
|
# in_sync_snr_db_th: SNR threshold (in dB) above which the UE considers to be in-sync
|
|
# nof_in_sync_events: Number of PHY in-sync events before sending an in-sync event to RRC
|
|
# nof_out_of_sync_events: Number of PHY out-sync events before sending an out-sync event to RRC
|
|
#
|
|
#####################################################################
|
|
[phy]
|
|
#rx_gain_offset = 62
|
|
#prach_gain = 30
|
|
#cqi_max = 15
|
|
#cqi_fixed = 10
|
|
#snr_ema_coeff = 0.1
|
|
#snr_estim_alg = refs
|
|
#pdsch_max_its = 8 # These are half iterations
|
|
#pdsch_meas_evm = false
|
|
#nof_phy_threads = 3
|
|
#equalizer_mode = mmse
|
|
#correct_sync_error = false
|
|
#sfo_ema = 0.1
|
|
#sfo_correct_period = 10
|
|
#sss_algorithm = full
|
|
#estimator_fil_auto = false
|
|
#estimator_fil_stddev = 1.0
|
|
#estimator_fil_order = 4
|
|
#snr_to_cqi_offset = 0.0
|
|
#interpolate_subframe_enabled = false
|
|
#pdsch_csi_enabled = true
|
|
#pdsch_8bit_decoder = false
|
|
#force_ul_amplitude = 0
|
|
|
|
#in_sync_rsrp_dbm_th = -130.0
|
|
#in_sync_snr_db_th = 3.0
|
|
#nof_in_sync_events = 10
|
|
#nof_out_of_sync_events = 20
|
|
|
|
#####################################################################
|
|
# Simulation configuration options
|
|
#
|
|
# The UE simulation supports turning on and off airplane mode in the UE.
|
|
# The actions are carried periodically until the UE is stopped.
|
|
#
|
|
# airplane_t_on_ms: Time to leave airplane mode turned on (in ms)
|
|
#
|
|
# airplane_t_off_ms: Time to leave airplane mode turned off (in ms)
|
|
#
|
|
#####################################################################
|
|
[sim]
|
|
#airplane_t_on_ms = -1
|
|
#airplane_t_off_ms = -1
|
|
|
|
#####################################################################
|
|
# General configuration options
|
|
#
|
|
# metrics_csv_enable: Write UE metrics to CSV file.
|
|
#
|
|
# metrics_period_secs: Sets the period at which metrics are requested from the UE.
|
|
#
|
|
# metrics_csv_filename: File path to use for CSV metrics.
|
|
#
|
|
# tracing_enable: Write source code tracing information to a file.
|
|
#
|
|
# tracing_filename: File path to use for tracing information.
|
|
#
|
|
# have_tti_time_stats: Calculate TTI execution statistics using system clock
|
|
#
|
|
#####################################################################
|
|
[general]
|
|
#metrics_csv_enable = false
|
|
#metrics_period_secs = 1
|
|
#metrics_csv_filename = /tmp/ue_metrics.csv
|
|
#have_tti_time_stats = true
|
|
#tracing_enable = true
|
|
#tracing_filename = /tmp/ue_tracing.log
|