#####################################################################
#                   srsEPC configuration file
#####################################################################

#####################################################################
# MME configuration
#
# mme_code:         8-bit MME code identifies the MME within a group.
# mme_group:        16-bit MME group identifier.
# tac:              16-bit Tracking Area Code.
# mcc:              Mobile Country Code
# mnc:              Mobile Network Code
<<<<<<< HEAD
# mme_bindx_addr:   IP subnet to listen for eNB S1 connnections
# apn:		        Set Access Point Name (APN)
=======
# mme_bind_addr:    IP bind addr to listen for eNB S1 connnections
>>>>>>> epc
#
#####################################################################
[mme]
mme_code = 0x1a
mme_group = 0x0001
tac = 0x0007
mcc = 001
mnc = 01
mme_bind_addr = 127.0.1.100
apn = srsapn

#####################################################################
# HSS configuration
#
# algo:            Authentication algorithm (xor/milenage)
# db_file:         Location of .csv file that stores UEs information.
#
#####################################################################
[hss]
auth_algo = xor
db_file = user_db.csv


#####################################################################
# SP-GW configuration
#
# gtpu_bind_addr:   GTP-U bind adress.
#
#####################################################################

[spgw]
gtpu_bind_addr=127.0.1.100
sgi_if_addr=172.16.0.1

####################################################################
# Log configuration
#
# Log levels can be set for individual layers. "all_level" sets log
# level for all layers unless otherwise configured.
# Format: e.g. s1ap_level = info
#
# In the same way, packet hex dumps can be limited for each level.
# "all_hex_limit" sets the hex limit for all layers unless otherwise
# configured.
# Format: e.g. s1ap_hex_limit = 32
#
# Logging layers: s1ap, gtpc, spgw, hss, all
# Logging levels: debug, info, warning, error, none
#
# filename: File path to use for log output. Can be set to stdout
#           to print logs to standard output
#####################################################################
[log]
all_level = debug
all_hex_limit = 32
filename = /tmp/epc.log

#s1ap_level = debug
#gtpc_level = debug
#spgw_level = debug
#hss_level = debug