#####################################################################
#                   srsEPC configuration file
#####################################################################

#####################################################################
# MME configuration
#
# mme_code:         8-bit MME code identifies the MME within a group.
# mme_group:        16-bit MME group identifier.
# tac:              16-bit Tracking Area Code.
# mcc:              Mobile Country Code
# mnc:              Mobile Network Code
# full_net_name     Display Name of the Network
# short_net_name    Short Display Name of the Network
# apn:		          Set Access Point Name (APN)
# mme_bind_addr:    IP bind addr to listen for eNB S1-MME connnections
# dns_addr:         DNS server address for the UEs
# encryption_algo:  Preferred encryption algorithm for NAS layer 
#                   (supported: EEA0 (default), EEA1, EEA2, EEA3)
# integrity_algo:   Preferred integrity protection algorithm for NAS 
#                   (supported: EIA0 (rejected by most UEs), EIA1 (default), EIA2, EIA3
# paging_timer:     Value of paging timer in seconds (T3413)
# request_imeisv:   Request UE's IMEI-SV in security mode command
#
#####################################################################
[mme]
mme_code = 0x1a
mme_group = 0x0001
tac = 0x0007
mcc = 001
mnc = 01
mme_bind_addr = 127.0.1.100
apn = srsapn
dns_addr = 8.8.8.8
encryption_algo = EEA0
integrity_algo = EIA1
paging_timer = 2
request_imeisv = false

#####################################################################
# HSS configuration
#
# db_file:         Location of .csv file that stores UEs information.
#
#####################################################################
[hss]
db_file = user_db.csv

#####################################################################
# SP-GW configuration
#
# gtpu_bind_addr:   GTP-U bind address.
# sgi_if_addr:      SGi TUN interface IP address.
# sgi_if_name:      SGi TUN interface name.
# max_paging_queue: Maximum packets in paging queue (per UE).
#
#####################################################################

[spgw]
gtpu_bind_addr   = 127.0.1.100
sgi_if_addr      = 172.16.0.1
sgi_if_name      = srs_spgw_sgi
max_paging_queue = 100

####################################################################
# PCAP configuration
#
# Packets are captured to file in the compact format decoded by 
# the Wireshark s1ap dissector and with DLT 150. 
# To use the dissector, edit the preferences for DLT_USER to 
# add an entry with DLT=150, Payload Protocol=s1ap.
#
# enable:   Enable or disable the PCAP.
# filename: File name where to save the PCAP.
#
####################################################################
[pcap]
enable   = false
filename = /tmp/epc.pcap

####################################################################
# Log configuration
#
# Log levels can be set for individual layers. "all_level" sets log
# level for all layers unless otherwise configured.
# Format: e.g. s1ap_level = info
#
# In the same way, packet hex dumps can be limited for each level.
# "all_hex_limit" sets the hex limit for all layers unless otherwise
# configured.
# Format: e.g. s1ap_hex_limit = 32
#
# Logging layers: nas, s1ap, mme_gtpc, spgw_gtpc, gtpu, spgw, hss, all
# Logging levels: debug, info, warning, error, none
#
# filename: File path to use for log output. Can be set to stdout
#           to print logs to standard output
#####################################################################
[log]
all_level = info
all_hex_limit = 32
filename = /tmp/epc.log

#nas_level = debug
#s1ap_level = debug
#mme_gtpc_level = debug
#spgw_gtpc_level = debug
#gtpu_level = debug
#spgw_level = debug
#hss_level = debug