/** * * \section COPYRIGHT * * Copyright 2013-2021 Software Radio Systems Limited * * By using this file, you agree to the terms and conditions set * forth in the LICENSE file which can be found at the top level of * the distribution. * */ #include "rlc_test_common.h" #include "srsran/common/buffer_pool.h" #include "srsran/common/rlc_pcap.h" #include "srsran/common/test_common.h" #include "srsran/common/threads.h" #include "srsran/interfaces/ue_pdcp_interfaces.h" #include "srsran/interfaces/ue_rrc_interfaces.h" #include "srsran/rlc/rlc_am_nr.h" #define NBUFS 5 #define HAVE_PCAP 0 #define SDU_SIZE 500 using namespace srsue; using namespace srsran; int basic_test_tx(rlc_am* rlc, byte_buffer_t pdu_bufs[NBUFS]) { // Push 5 SDUs into RLC1 unique_byte_buffer_t sdu_bufs[NBUFS]; for (int i = 0; i < NBUFS; i++) { sdu_bufs[i] = srsran::make_byte_buffer(); sdu_bufs[i]->msg[0] = i; // Write the index into the buffer sdu_bufs[i]->N_bytes = 1; // Give each buffer a size of 1 byte sdu_bufs[i]->md.pdcp_sn = i; // PDCP SN for notifications rlc->write_sdu(std::move(sdu_bufs[i])); } TESTASSERT(15 == rlc->get_buffer_state()); // 2 Bytes * NBUFFS (header size) + NBUFFS (data) = 15 // Read 5 PDUs from RLC1 (1 byte each) for (int i = 0; i < NBUFS; i++) { uint32_t len = rlc->read_pdu(pdu_bufs[i].msg, 3); // 2 bytes for header + 1 byte payload pdu_bufs[i].N_bytes = len; TESTASSERT_EQ(3, len); } TESTASSERT(0 == rlc->get_buffer_state()); return SRSRAN_SUCCESS; } /* * Test the limits of the TX/RX window checkers * * This will test */ int window_checker_test() { rlc_am_tester tester; timer_handler timers(8); auto& test_logger = srslog::fetch_basic_logger("TESTER "); test_delimit_logger delimiter("window checkers"); rlc_am rlc1(srsran_rat_t::nr, srslog::fetch_basic_logger("RLC_AM_1"), 1, &tester, &tester, &timers); rlc_am_nr_tx* tx = dynamic_cast(rlc1.get_tx()); rlc_am_nr_rx* rx = dynamic_cast(rlc1.get_rx()); if (not rlc1.configure(rlc_config_t::default_rlc_am_nr_config())) { return SRSRAN_ERROR; } { // RLC1 RX_NEXT == 0 and RLC2 TX_NEXT_ACK == 0 uint32_t sn_inside_below = 0; uint32_t sn_inside_above = 2047; uint32_t sn_outside_below = 4095; uint32_t sn_outside_above = 2048; TESTASSERT_EQ(true, rx->inside_rx_window(sn_inside_below)); TESTASSERT_EQ(true, rx->inside_rx_window(sn_inside_above)); TESTASSERT_EQ(false, rx->inside_rx_window(sn_outside_below)); TESTASSERT_EQ(false, rx->inside_rx_window(sn_outside_above)); TESTASSERT_EQ(true, tx->inside_tx_window(sn_inside_below)); TESTASSERT_EQ(true, tx->inside_tx_window(sn_inside_above)); TESTASSERT_EQ(false, tx->inside_tx_window(sn_outside_below)); TESTASSERT_EQ(false, tx->inside_tx_window(sn_outside_above)); } rlc_am_nr_rx_state_t rx_st = {}; rx_st.rx_next = 4095; rlc_am_nr_tx_state_t tx_st = {}; tx_st.tx_next_ack = 4095; rx->set_rx_state(rx_st); tx->set_tx_state(tx_st); { // RX_NEXT == 4095 TX_NEXT_ACK == 4095 uint32_t sn_inside_below = 0; uint32_t sn_inside_above = 2046; uint32_t sn_outside_below = 4094; uint32_t sn_outside_above = 2048; TESTASSERT_EQ(true, rx->inside_rx_window(sn_inside_below)); TESTASSERT_EQ(true, rx->inside_rx_window(sn_inside_above)); TESTASSERT_EQ(false, rx->inside_rx_window(sn_outside_below)); TESTASSERT_EQ(false, rx->inside_rx_window(sn_outside_above)); TESTASSERT_EQ(true, tx->inside_tx_window(sn_inside_below)); TESTASSERT_EQ(true, tx->inside_tx_window(sn_inside_above)); TESTASSERT_EQ(false, tx->inside_tx_window(sn_outside_below)); TESTASSERT_EQ(false, tx->inside_tx_window(sn_outside_above)); } return SRSRAN_SUCCESS; } /* * Test the transmission and acknowledgement of 5 SDUs. * * Each SDU is transmitted as a single PDU. * There are no lost PDUs, and the byte size is small, so the Poll_PDU configuration * will trigger the status report. * Poll PDU is configured to 4, so the 5th PDU should set the polling bit. */ int basic_test() { rlc_am_tester tester; timer_handler timers(8); byte_buffer_t pdu_bufs[NBUFS]; auto& test_logger = srslog::fetch_basic_logger("TESTER "); test_delimit_logger delimiter("basic tx/rx"); rlc_am rlc1(srsran_rat_t::nr, srslog::fetch_basic_logger("RLC_AM_1"), 1, &tester, &tester, &timers); rlc_am rlc2(srsran_rat_t::nr, srslog::fetch_basic_logger("RLC_AM_2"), 1, &tester, &tester, &timers); rlc_am_nr_tx* tx1 = dynamic_cast(rlc1.get_tx()); rlc_am_nr_rx* rx1 = dynamic_cast(rlc1.get_rx()); rlc_am_nr_tx* tx2 = dynamic_cast(rlc2.get_tx()); rlc_am_nr_rx* rx2 = dynamic_cast(rlc2.get_rx()); // before configuring entity TESTASSERT(0 == rlc1.get_buffer_state()); if (not rlc1.configure(rlc_config_t::default_rlc_am_nr_config())) { return -1; } if (not rlc2.configure(rlc_config_t::default_rlc_am_nr_config())) { return -1; } basic_test_tx(&rlc1, pdu_bufs); // Write 5 PDUs into RLC2 for (int i = 0; i < NBUFS; i++) { rlc2.write_pdu(pdu_bufs[i].msg, pdu_bufs[i].N_bytes); } TESTASSERT(3 == rlc2.get_buffer_state()); // Read status PDU from RLC2 byte_buffer_t status_buf; int len = rlc2.read_pdu(status_buf.msg, 3); status_buf.N_bytes = len; TESTASSERT(0 == rlc2.get_buffer_state()); // Assert status is correct rlc_am_nr_status_pdu_t status_check = {}; rlc_am_nr_read_status_pdu(&status_buf, rlc_am_nr_sn_size_t::size12bits, &status_check); TESTASSERT(status_check.ack_sn == 5); // 5 is the last SN that was not received. // Write status PDU to RLC1 rlc1.write_pdu(status_buf.msg, status_buf.N_bytes); // Check TX_NEXT_ACK rlc_am_nr_tx_state_t st = tx1->get_tx_state(); TESTASSERT_EQ(5, st.tx_next_ack); TESTASSERT_EQ(0, tx1->get_tx_window_size()); // Check statistics rlc_bearer_metrics_t metrics1 = rlc1.get_metrics(); rlc_bearer_metrics_t metrics2 = rlc2.get_metrics(); // RLC1 PDU metrics TESTASSERT_EQ(5, metrics1.num_tx_sdus); TESTASSERT_EQ(0, metrics1.num_rx_sdus); TESTASSERT_EQ(5, metrics1.num_tx_sdu_bytes); TESTASSERT_EQ(0, metrics1.num_rx_sdu_bytes); TESTASSERT_EQ(0, metrics1.num_lost_sdus); // RLC1 SDU metrics TESTASSERT_EQ(5, metrics1.num_tx_pdus); TESTASSERT_EQ(1, metrics1.num_rx_pdus); // One status PDU TESTASSERT_EQ(15, metrics1.num_tx_pdu_bytes); // 2 Bytes * NBUFFS (header size) + NBUFFS (data) = 15 TESTASSERT_EQ(3, metrics1.num_rx_pdu_bytes); // One status PDU TESTASSERT_EQ(0, metrics1.num_lost_sdus); // No lost SDUs // RLC2 PDU metrics TESTASSERT_EQ(0, metrics2.num_tx_sdus); TESTASSERT_EQ(5, metrics2.num_rx_sdus); TESTASSERT_EQ(0, metrics2.num_tx_sdu_bytes); TESTASSERT_EQ(5, metrics2.num_rx_sdu_bytes); TESTASSERT_EQ(0, metrics2.num_lost_sdus); // RLC2 SDU metrics TESTASSERT_EQ(1, metrics2.num_tx_pdus); // One status PDU TESTASSERT_EQ(5, metrics2.num_rx_pdus); // 5 SDUs TESTASSERT_EQ(3, metrics2.num_tx_pdu_bytes); // One status PDU TESTASSERT_EQ(15, metrics2.num_rx_pdu_bytes); // 2 Bytes * NBUFFS (header size) + NBUFFS (data) = 15 TESTASSERT_EQ(0, metrics2.num_lost_sdus); // No lost SDUs return SRSRAN_SUCCESS; } /* * Test the loss of a single PDU. * NACK should be visible in the status report. * Retx after NACK should be present too. */ int lost_pdu_test() { rlc_am_tester tester; timer_handler timers(8); byte_buffer_t pdu_bufs[NBUFS]; auto& test_logger = srslog::fetch_basic_logger("TESTER "); rlc_am rlc1(srsran_rat_t::nr, srslog::fetch_basic_logger("RLC_AM_1"), 1, &tester, &tester, &timers); rlc_am rlc2(srsran_rat_t::nr, srslog::fetch_basic_logger("RLC_AM_2"), 1, &tester, &tester, &timers); test_delimit_logger delimiter("lost PDU"); // before configuring entity TESTASSERT(0 == rlc1.get_buffer_state()); if (not rlc1.configure(rlc_config_t::default_rlc_am_nr_config())) { return -1; } if (not rlc2.configure(rlc_config_t::default_rlc_am_nr_config())) { return -1; } basic_test_tx(&rlc1, pdu_bufs); // Write 5 PDUs into RLC2 for (int i = 0; i < NBUFS; i++) { if (i != 3) { rlc2.write_pdu(pdu_bufs[i].msg, pdu_bufs[i].N_bytes); // Don't write RLC_SN=3. } } // Only after t-reassembly has expired, will the status report include NACKs. TESTASSERT(3 == rlc2.get_buffer_state()); { // Read status PDU from RLC2 byte_buffer_t status_buf; int len = rlc2.read_pdu(status_buf.msg, 5); status_buf.N_bytes = len; TESTASSERT(0 == rlc2.get_buffer_state()); // Assert status is correct rlc_am_nr_status_pdu_t status_check = {}; rlc_am_nr_read_status_pdu(&status_buf, rlc_am_nr_sn_size_t::size12bits, &status_check); TESTASSERT(status_check.ack_sn == 3); // 3 is the next expected SN (i.e. the lost packet.) // Write status PDU to RLC1 rlc1.write_pdu(status_buf.msg, status_buf.N_bytes); } // Step timers until reassambly timeout expires for (int cnt = 0; cnt < 35; cnt++) { timers.step_all(); } // t-reassembly has expired. There should be a NACK in the status report. TESTASSERT(5 == rlc2.get_buffer_state()); { // Read status PDU from RLC2 byte_buffer_t status_buf; int len = rlc2.read_pdu(status_buf.msg, 5); status_buf.N_bytes = len; TESTASSERT(0 == rlc2.get_buffer_state()); // Assert status is correct rlc_am_nr_status_pdu_t status_check = {}; rlc_am_nr_read_status_pdu(&status_buf, rlc_am_nr_sn_size_t::size12bits, &status_check); TESTASSERT(status_check.ack_sn == 5); // 5 is the next expected SN. TESTASSERT(status_check.N_nack == 1); // We lost one PDU. TESTASSERT(status_check.nacks[0].nack_sn == 3); // Lost PDU SN=3. // Write status PDU to RLC1 rlc1.write_pdu(status_buf.msg, status_buf.N_bytes); // Check there is an Retx of SN=3 TESTASSERT(3 == rlc1.get_buffer_state()); } { // Check correct re-transmission byte_buffer_t retx_buf; int len = rlc1.read_pdu(retx_buf.msg, 3); retx_buf.N_bytes = len; TESTASSERT(3 == len); rlc2.write_pdu(retx_buf.msg, retx_buf.N_bytes); TESTASSERT(0 == rlc2.get_buffer_state()); } // Check statistics rlc_bearer_metrics_t metrics1 = rlc1.get_metrics(); rlc_bearer_metrics_t metrics2 = rlc2.get_metrics(); // SDU metrics TESTASSERT_EQ(5, metrics1.num_tx_sdus); TESTASSERT_EQ(0, metrics1.num_rx_sdus); TESTASSERT_EQ(5, metrics1.num_tx_sdu_bytes); TESTASSERT_EQ(0, metrics1.num_rx_sdu_bytes); TESTASSERT_EQ(0, metrics1.num_lost_sdus); // PDU metrics TESTASSERT_EQ(5 + 1, metrics1.num_tx_pdus); // One re-transmission TESTASSERT_EQ(2, metrics1.num_rx_pdus); // One status PDU TESTASSERT_EQ(18, metrics1.num_tx_pdu_bytes); // 2 Bytes * NBUFFS (header size) + NBUFFS (data) + 1 rext (3) = 18 TESTASSERT_EQ(3 + 5, metrics1.num_rx_pdu_bytes); // Two status PDU (one with a NACK) TESTASSERT_EQ(0, metrics1.num_lost_sdus); // No lost SDUs // PDU metrics TESTASSERT_EQ(0, metrics2.num_tx_sdus); TESTASSERT_EQ(5, metrics2.num_rx_sdus); TESTASSERT_EQ(0, metrics2.num_tx_sdu_bytes); TESTASSERT_EQ(5, metrics2.num_rx_sdu_bytes); TESTASSERT_EQ(0, metrics2.num_lost_sdus); // SDU metrics TESTASSERT_EQ(2, metrics2.num_tx_pdus); // Two status PDUs TESTASSERT_EQ(5, metrics2.num_rx_pdus); // 5 PDUs (6 tx'ed, but one was lost) TESTASSERT_EQ(5 + 3, metrics2.num_tx_pdu_bytes); // Two status PDU (one with a NACK) TESTASSERT_EQ(15, metrics2.num_rx_pdu_bytes); // 2 Bytes * NBUFFS (header size) + NBUFFS (data) = 15 TESTASSERT_EQ(0, metrics2.num_lost_sdus); // No lost SDUs return SRSRAN_SUCCESS; } /* * Test the basic segmentation of a single SDU. * A single SDU of 3 bytes is segmented into 3 PDUs */ int basic_segmentation_test() { rlc_am_tester tester; timer_handler timers(8); auto& test_logger = srslog::fetch_basic_logger("TESTER "); test_delimit_logger delimiter("basic segmentation"); rlc_am rlc1(srsran_rat_t::nr, srslog::fetch_basic_logger("RLC_AM_1"), 1, &tester, &tester, &timers); rlc_am rlc2(srsran_rat_t::nr, srslog::fetch_basic_logger("RLC_AM_2"), 1, &tester, &tester, &timers); // before configuring entity TESTASSERT(0 == rlc1.get_buffer_state()); if (not rlc1.configure(rlc_config_t::default_rlc_am_nr_config())) { return -1; } if (not rlc2.configure(rlc_config_t::default_rlc_am_nr_config())) { return -1; } // Push 1 SDU into RLC1 unique_byte_buffer_t sdu; sdu = srsran::make_byte_buffer(); TESTASSERT(nullptr != sdu); sdu->msg[0] = 0; // Write the index into the buffer sdu->N_bytes = 3; // Give the SDU the size of 3 bytes sdu->md.pdcp_sn = 0; // PDCP SN for notifications rlc1.write_sdu(std::move(sdu)); // Read 3 PDUs constexpr uint16_t n_pdus = 3; unique_byte_buffer_t pdu_bufs[n_pdus]; for (int i = 0; i < 3; i++) { pdu_bufs[i] = srsran::make_byte_buffer(); TESTASSERT(nullptr != pdu_bufs[i]); if (i == 0) { pdu_bufs[i]->N_bytes = rlc1.read_pdu(pdu_bufs[i]->msg, 3); TESTASSERT_EQ(3, pdu_bufs[i]->N_bytes); } else { pdu_bufs[i]->N_bytes = rlc1.read_pdu(pdu_bufs[i]->msg, 5); TESTASSERT_EQ(5, pdu_bufs[i]->N_bytes); } } // Write 5 PDUs into RLC2 for (int i = 0; i < n_pdus; i++) { rlc2.write_pdu(pdu_bufs[i]->msg, pdu_bufs[i]->N_bytes); // Don't write RLC_SN=3. } // Check statistics rlc_bearer_metrics_t metrics1 = rlc1.get_metrics(); rlc_bearer_metrics_t metrics2 = rlc2.get_metrics(); // SDU metrics TESTASSERT_EQ(0, metrics2.num_tx_sdus); TESTASSERT_EQ(1, metrics2.num_rx_sdus); TESTASSERT_EQ(0, metrics2.num_tx_sdu_bytes); TESTASSERT_EQ(3, metrics2.num_rx_sdu_bytes); TESTASSERT_EQ(0, metrics2.num_lost_sdus); // PDU metrics TESTASSERT_EQ(0, metrics2.num_tx_pdus); TESTASSERT_EQ(3, metrics2.num_rx_pdus); // 5 PDUs (6 tx'ed, but one was lost) TESTASSERT_EQ(0, metrics2.num_tx_pdu_bytes); // Two status PDU (one with a NACK) TESTASSERT_EQ(13, metrics2.num_rx_pdu_bytes); // 1 PDU (No SO) + 2 PDUs (with SO) = 3 + 2*5 TESTASSERT_EQ(0, metrics2.num_lost_sdus); // No lost SDUs return SRSRAN_SUCCESS; } int main(int argc, char** argv) { // Setup the log message spy to intercept error and warning log entries from RLC if (!srslog::install_custom_sink(srsran::log_sink_message_spy::name(), std::unique_ptr( new srsran::log_sink_message_spy(srslog::get_default_log_formatter())))) { return SRSRAN_ERROR; } auto* spy = static_cast(srslog::find_sink(srsran::log_sink_message_spy::name())); if (spy == nullptr) { return SRSRAN_ERROR; } srslog::set_default_sink(*spy); auto& logger_rlc1 = srslog::fetch_basic_logger("RLC_AM_1", *spy, false); auto& logger_rlc2 = srslog::fetch_basic_logger("RLC_AM_2", *spy, false); logger_rlc1.set_hex_dump_max_size(100); logger_rlc2.set_hex_dump_max_size(100); logger_rlc1.set_level(srslog::basic_levels::debug); logger_rlc2.set_level(srslog::basic_levels::debug); // start log back-end srslog::init(); TESTASSERT(window_checker_test() == SRSRAN_SUCCESS); TESTASSERT(basic_test() == SRSRAN_SUCCESS); TESTASSERT(lost_pdu_test() == SRSRAN_SUCCESS); TESTASSERT(basic_segmentation_test() == SRSRAN_SUCCESS); return SRSRAN_SUCCESS; }