* Protect PHY SR signal management in a class
* Protect intra_freq_meas vector
* Protect cell and srate shared variables in thread-safe classes
* srsue,srsenb: include TSAN options header
* Protect ue_rnti_t and rnti scheduling windows behind thread-safe classes
* Protect access to state variable in sync_state
* Protect access to metrics configuration
* Protect access to is_pending_sr
* Protect access to UE prach worker
* Protect UE mux
* Avoid unlocking mutex twice
* Fix data races in RF/ZMQ
* Fix data races in intra_measure and PHY
* Fix minor data races in MAC
* Make TSAN default behaviour to not halt on error
* Fix blocking in intra cell measurement
* Address comments
Co-authored-by: Andre Puschmann <andre@softwareradiosystems.com>
the issue let to unwanted log warning at the end of the UE
execution when the PHY was still pushing DL PDUs while MAC
was already stopped.
This fixes#3003
in the mac_test the tb_decoded() method was called twice for
the 2nd codeword, causig TSAN to complain about an unlocked mutex
being unlocked.
The patch resolves the potential issue only calling tb_decoded
for a grant/tb thas has a non-zero MCS.
The patch also adjusts the reset function to have a safe and "unsafe"
version to be called from inside the class, similar to other
classes where we do the same.
building on the previous refactor this patch now adds support
for peridoic BSR reporting (using short BSR). It furthermore does
the following changes:
* add BSR packing
* add proc_bsr_nr unit test
* move mac_nr test code into test folder under src (needs to be done with other test code too)
* refactor some common methods to mac_common.cc
* add common mux_base class
* move UL PDU generation to mux class
* add logical channel registration to MAC, MUX, BSR
* add initial proc BSR
* add basic MAC NR test
* rework MAC interfaces
* Replaced UE logger in the ue class.
* Replaced loggers in the main phy class and prach.
* Replaced loggers in phy common and ta_control.
* Replace loggers in cc and sf workers.
* Replaced loggers in intra_measure, scell_recv, search, sfn_sync, sync.
* Remove last uses of the old loggers in the main phy class.
* Remove stray newline in logs.
* Replaced loggers in ue gw.
* - Started to replace loggers in the ue stack.
- Replaced loggers in usim and pcsc.
- Adapted nas and usim tests.
* Replace loggers in nas.
* Added missing log init calls in two previously modified tests.
* Replaced logger in nas idle procs.
* Replaced loggers in nas emm state.
* Replaced loggers in tft packet filter and adapted tft test.
* Replaced loggers in main RRC class.
* Replaced loggers in RRC cell.
* Replaced loggers in RRC meas.
* Replaced loggers in rrc procedures.
* Started logger replacement in MAC layer, more precisely in demux and dl_harq classes.
Been unable to inject loggers in construction for dl_tb_process due to very weird static assertions in the std::vector code being the type not constructible which is not true, so instead use the main MAC logger directly.
* Replaced loggers in mac mux class.
* Replaced loggers in mac pro_bsr.
* Replaced loggers in mac proc phr.
* Replaced loggers in mac proc SR and RA.
* Replace loggers in mac UL HARQ.
* Replaced loggers in main ue stack class.
* Fixed nas test crashing due to a null string.
* Ported mac_test to use the new loggers.
* Removed TTI reporting for the PHY log as the old logger did.
* Replaced loggers in UE phy tests.
* Configure loggers in nas_test.
* Replaced loggers in rrc_meas_test.
* Replaced loggers in rrc_reconfig_test.
* Added missing newline in tft_test.
* Fix compilation errors in TTCN3 tests.
* Fix linker error detected in CI and warning.
* Replaced loggers in TTCN3 tests.
* Fix a text replace error in some log messages.
* Remove trailing newlines from log entries.
* Remove old logger from rrc.
* Flush backend before printing the test status.
* - Fix compilation error from previous rebase.
- Remove trailing newlines from some missing log entries.
that patch addreses issue #2199 by defering RA-related calls that
are executed from within PHY workers.
The time-critical bits of more complex functions such as tb_decoded()
are still executed in the PHY worker thread but the state machine
manipulation is defered.
this potentially fixes the issue we see during HO and RLF
under high DL load.
The issue happens because buffered DL PDUs are delivered to
RLC after reestablishing RLC that confuse the receiving
RLC entity bc the sequence numbers are very high, as opposed
to begin with zero again after reestablishment.
* mac_test: add extended TBSR unit test
unit test to MAC UL packing after sending a TBSR
this fixes the MAC issues described in issue #2002
* mux: fix updating of LCG buffer state after packing PDU
we've previously lowered the buffer state of the LCG according
to the bytes that have been scheduled, but not according to
those that have been actually included in the PDU.
* proc_bsr: fix LCG buffer state updating for TBSR
when sending a TBSR do not update the internal buffer
state of the BSR proc.
This caused issues because the buffer state for all LCG that
are not included in the TBSR are set to zero, although at least
one LCG does have data to transmit.
* rlc_am: include LCID when logging retx of SN
fix for #1934
This fixes a race condition between Stack thread and DL
PDU processing that lead to updates of the RLC buffer that
are undetected by the BSR routine.
What happens is that in a UL SCH PDU all outstanding data is transmitted
and and a LBSR with all zero buffers is sent.
14:39:47.327301 [MAC ] [D] [ 3793] BSR: LCID=3 old_buffer=59
14:39:47.330600 [MAC ] [I] [ 3793] UL LCID=3 len=58 LBSR: b=0 0 0 0
Note that "old_buffer" isn't set to zero here.
At the same time (same TTI), the MAC PDU processing thread handles DL-SCH PDUs
that may generate new UL PDUs:
14:39:47.330749 [RLC ] [I] DRB1 Tx SDU (54 B, tx_sdu_queue_len=1)
14:39:47.330762 [RLC ] [I] DRB1 Tx SDU (54 B, tx_sdu_queue_len=2)
14:39:47.330775 [RLC ] [I] DRB1 Tx SDU (54 B, tx_sdu_queue_len=3)
..
Those PDUs are "new data" since the previous buffer state was zero.
Here is the race now between the threads, at the end of the bsr::step() function
old_buffer of each LCG is updated with the previous new_buffer, so
the buffer state of LCG=2 is now 59.
Now MAC starts the next TTI:
14:39:47.331910 [MAC ] [D] [ 3794] Running MAC tti=3794
14:39:47.331928 [MAC ] [D] [ 3794] Update Bj: lcid=0, Bj=0
14:39:47.331934 [MAC ] [D] [ 3794] Update Bj: lcid=1, Bj=0
14:39:47.331938 [MAC ] [D] [ 3794] Update Bj: lcid=2, Bj=0
14:39:47.331941 [MAC ] [D] [ 3794] Update Bj: lcid=3, Bj=-1752
14:39:47.331951 [MAC ] [D] [ 3794] BSR: LCID=0 update new buffer=0
14:39:47.331960 [MAC ] [D] [ 3794] BSR: LCID=1 update new buffer=0
14:39:47.331964 [MAC ] [D] [ 3794] BSR: LCID=2 update new buffer=0
14:39:47.331971 [MAC ] [D] [ 3794] BSR: LCID=3 update new buffer=335
14:39:47.331976 [MAC ] [D] [ 3794] BSR: check_new_data() -> get_buffer_state_lcg(0)=0
14:39:47.331980 [MAC ] [D] [ 3794] BSR: check_new_data() -> get_buffer_state_lcg(1)=0
14:39:47.331984 [MAC ] [D] [ 3794] BSR: check_new_data() -> get_buffer_state_lcg(2)=59
14:39:47.331988 [MAC ] [D] [ 3794] BSR: check_new_data() -> get_buffer_state_lcg(3)=0
14:39:47.331993 [MAC ] [D] [ 3794] BSR: LCID=0 old_buffer=0
14:39:47.332000 [MAC ] [D] [ 3794] BSR: LCID=1 old_buffer=0
14:39:47.332003 [MAC ] [D] [ 3794] BSR: LCID=2 old_buffer=0
14:39:47.332007 [MAC ] [D] [ 3794] BSR: LCID=3 old_buffer=335
And since the buffer state of LCG=2 isn't zero, the new data for LCID=3 of that LCG is considered.
So effectivly, the BSR missed the "empty" buffer state for a fraction of time and doesn't
consider the outgoing data generated in the same TTI as new. It therefore
doesn't transmit a BSR.
in which a BSR wasn't
when releasing PUCCH/SRS (see 5.3.13 in 36.331) we need to reset the SR config as well.
In our case, SR is handled by MAC so we need to (re-)configure MAC, not all of
MAC though, just SR.
* Make PHY non-blocking and fefactor HO procedure
* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers
Co-authored-by: Ismael Gomez <ismagom@gmail.com>
this patch fixes the UL BSR as per TS 36.321, it includes following
main changes:
* report UL buffer state to reflect the UEs transmit buffer after
the MAC UL PDU containing the BSR has been built.
In other words, if the UE, for example, can transmit all outstanding
data in an UL grant, it will not report any pending data to transmit.
* refactor MUX routines and subheader space calculation
during deinit of the UE/eNB it could happen that the log_ptr
was already set to null but the stack thread was still accessing
it through log_h->info()
i've moved the old macro into a new header and used as as much
as possible. there are still places in the code where similar
macros are used but we would need to change the variable name
to replace them
* Use task id to track old background tasks in RA procedure
* Improve robustness against RF overflow in PHY
* Increase SNR out-of-sync threshold
* Do not change frequency if it's the same
* Increase sync priority
* Increase time to start receiving to reduce input buffer occupation
* Use scoped lock in sf_worker