2864 Commits (959f37ae814c8278d1df915559d1d51022b86822)

Author SHA1 Message Date
Xavier Arteaga f64c268a69 SRSUE: Refactored MAC/RRC SCell Activation/Deactivation 4 years ago
Andre Puschmann ff5f215df9 rf_soapy: print warning when using the Lime with shorter sample rates
the Lime has better performance when using the default LTE sample
rates due to filterering being done in the LMS RF chip.

Print a warning when using the Lime with the non-default LTE rates.
4 years ago
Andre Puschmann 2c797fce1a phy_common: add method to check whether we use default LTE symbol size
helpful getter to check whether we've compiled in
or selected at run time to use default LTE sample rates
4 years ago
Xavier Arteaga a6ac80cfbf Initial NR DL DCI Packing/Unpacking 4 years ago
Francisco Paisana fdec451a9d disable mcs>20 if eNB supports UL 64QAM but UE doesn't 4 years ago
Francisco Paisana bf7c587e4f add UL 64QAM support to eNB RRC and scheduler 4 years ago
Andre Puschmann 5f7f818abb pdu: fix bug in BSR table lookup
the bug causes the BSR to return a bsr_idx of 0, i.e. no data
pending, when the buff_size was reported to be 1 B only.

Instead, the UE should return BSR idx 1, i.e. between 0 < BSR <= 10.
4 years ago
Andre Puschmann e227fec3d8 pdu_test: add rigerous test for LBSR content
* make sure upper and lower edges of Table 6.1.3.1-1 in 36.321 are correct
* fix existing BSR test vectors (verified with Wireshark)
4 years ago
Andre Puschmann 286844b3dd mac_pdu: reset subheader state when deleting from PDU
when packing MAC PDUs, adding a new SDU might fail, for example
because RLC couldn't provide a new PDU. The muxer then needs
to delete the subheader from the PDU again.

When adding a padding BSR at the end, the same subheader is again
used to store the BSR, so any state in that subheader should be removed.

In the particular case, this was causing an issue when logging a LBSR
because the LCG buffer states are printed using the payload buffer,
which was still pointing to some memory that was used when trying
to add the new RLC PDU in the beginning.
4 years ago
Andre Puschmann 035d989737 pdu: fix unpacking of LCG2 of LBSR MAC CE
LBSR packing is fine but this makes the eNB do wrong things
because it thinkgs LCG2 has no or too much data to send.

LCG2 is our default LCG for DRB1. One occasion we saw the issue
is doing full rate TCP DL which requires quite a bit of ACK traffic
back to the sender. With the BSR for LCG2 being wrong, providing
UL grants was delayed and so the TCP DL throuhgput was very low.

In the log below we see that the buff_size[2]=1 so there is data to send.
Interestingly, the packing was correct so Wireshark displays it correctly.
But the unpacking not, as can be seen in the MAC log below which reports
0 buffer state for all LCGs

22:08:54.804792 [MAC ] [I] [ 5084] pdu_get: sdu_len=1212, channel.sched_len=1213, bsr.buff_size[2]=1
22:08:54.804840 [MAC ] [I] [ 5084] UL LCID=3 len=1212 LBSR: b=0 0 0 0
4 years ago
Xavier Arteaga cf55eb4c4f Improved comments 4 years ago
Xavier Arteaga e8f94c40b8 Added LDPC codeblock segmentation 4 years ago
Xavier Arteaga fc3d154fe3 Fix compilation 4 years ago
Xavier Arteaga 736e6db616 Initial resource allocation for NR 4 years ago
Xavier Arteaga 0439161de6 Removed modulation enum from LDPC RM 4 years ago
Pedro Alvarez 454162cea7 Deleted nas_interface_stack. 4 years ago
Pedro Alvarez 604e79214d Changed NAS is_attached interface to is_registered. 4 years ago
Pedro Alvarez 14844a168a Created new class to hold all NAS states for the NAS state machine. Added EMM-DEREGISTERED substates and EMM-REGISTERED substates.
Decoupled PLMN selection, attach request and service request. Removed RRC connect procedure from NAS.
4 years ago
Andre Puschmann 6773f6d02f pdu_queue: add reset method to empty queue 4 years ago
Francisco Paisana 88105c1577 change the namespace of tti point helper functions for the eNB 4 years ago
Andre Puschmann f155b7a5d5 rlc: fix stopping of poll retx timer (#2006)
* rlc_am: add TC for pollRetx timer handling

* rlc_am: fix stopping of pollRetx timer

stopping the pollRetx timer when receiving a status PDU
without checking the acknowledged PDUs is wrong.

if an ACK for another PDU, for which the polling bit has been set,
is still pending, it won't be rescheduled until another
PDU is transmitted that again starts the pollRetx timer.

this fixes the issue with missing RLC AM segment retx in #1992,
and #2003
4 years ago
Andre Puschmann 7cf919e2af Fix MAC PDU packing after sending Truncated BSR (#2004)
* mac_test: add extended TBSR unit test

unit test to MAC UL packing after sending a TBSR

this fixes the MAC issues described in issue #2002

* mux: fix updating of LCG buffer state after packing PDU

we've previously lowered the buffer state of the LCG according
to the bytes that have been scheduled, but not according to
those that have been actually included in the PDU.

* proc_bsr: fix LCG buffer state updating for TBSR

when sending a TBSR do not update the internal buffer
state of the BSR proc.

This caused issues because the buffer state for all LCG that
are not included in the TBSR are set to zero, although at least
one LCG does have data to transmit.

* rlc_am: include LCID when logging retx of SN
4 years ago
Andre Puschmann 1b97ba5300 benchmark_radio: fix duration and thread priority
I noticed that the app didn't configure the process with
RT thread prio. But it then turned out that in order to do
that we need to actually spawn a new thread. Also a few other things
didn't work out of the box.

In summary the changes are:
* fix duration to support more than 120s
* move main functionality in thread
* set high priority for radio thread
* only return success if no radio errors occured
4 years ago
Francisco Paisana 510959b50f update nr asn1 files, and asn1 tests 4 years ago
Xavier Arteaga 8d9577626b Fix NR FEC unit test 4 years ago
Xavier Arteaga 0c2f96d389 Fix 5G NR FEC memcheck 4 years ago
Xavier Arteaga 2835e87ff0 Add missing file 4 years ago
Xavier Arteaga f8dd67260f Polar: fix unit test working directory 4 years ago
Xavier Arteaga 15356b3ec8 Fix compilation for non-AVX2 machines 4 years ago
Xavier Arteaga 2c4aa1e379 Added Polar and LDPC forward error correction 4 years ago
David Rupprecht 387a84ff84 Updated missing byte 4 years ago
David Rupprecht b85cb614aa Added test cases for asn1 decoding lib from pcap 4 years ago
Xavier Arteaga 271002c9fb Fix compilation 4 years ago
Xavier Arteaga 4f89c6ed3f Added missing CMakeFiles 4 years ago
Xavier Arteaga f21590735d refactored FEC directories 4 years ago
Xavier Arteaga 7093a85f81 Refactored FEC directories 4 years ago
Xavier Arteaga c2621cc4f8 Protect ring-buffer write from nullptr 4 years ago
Francisco Paisana a865858db3 disable srbs UL during handover to avoid UL grants and scheduling requests before the handover is complete 4 years ago
Andre Puschmann f647343f18 rlc_am: fix poll bit during header reconstruction
this makes sure that the reconstructed RLC AM header
has the poll bit set when any of its segments had it set.

this triggered a bug in RLC AM because the Status PDU
isn't transmitted for a RLC PDU that was segmented and
only the first segment had the P flag set.
4 years ago
Francisco Paisana b40a5a958e use common function to fill rrc reconf message in handover 4 years ago
Francisco Paisana e9b693942f diff-based cell selection activation 4 years ago
Francisco Paisana 836e7d7ede refactor scell addition in the srsenb::rrc to follow the same style of other rrc recfg fields 4 years ago
Francisco Paisana f26b5ccde7 fix drb reestablishment during handover 4 years ago
Francisco Paisana 97f2e4336e refactor of functions for filling the asn1 radio resource config structs. This functions are used during rrc setup/reest/reconf 4 years ago
Xavier Arteaga 9487d27ef9 Renamed NR constants and comments 4 years ago
Xavier Arteaga e8f168b20c PDSCH NR: Added files 4 years ago
Xavier Arteaga c8477483d9 PDSCH NR: Added files 4 years ago
Xavier Arteaga 30d8e05d50 Fix PDSCH-DMRS symbol index 4 years ago
Xavier Arteaga 275cbafe6e Modified comments 4 years ago
Xavier Arteaga 8d34d344a8 Created PDSCH-NR configuration structures and refactored DMRS 4 years ago