04acc78c7d
metrics_test: add neighbor cell test
...
cleanup test and add neighbor cells so the displaying is tested
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal-------------Neighbour--DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 8 -33 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 8 -33 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
4 years ago
ddbf4e1645
metrics_stdout: print new table header if neighbour cells change
...
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.
--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -66 61 -3.3k 1 -76 11 18 1.1 8.4M 3% 0.0 21 262 167k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.1 9.6M 2% 0.0 22 476 214k 0%
0 2 -65 60 -3.3k 1 -76 16 22 1.3 13M 3% 0.0 23 1.1k 734k 0%
0 2 -64 59 -3.3k 1 -76 17 23 1.3 15M 2% 0.0 23 602 424k 0%
0 2 -63 58 -3.3k 1 -77 20 25 1.4 19M 3% 0.0 23 501 304k 0%
0 2 -62 57 -3.3k 1 -77 22 27 1.8 20M 10% 0.0 22 417 418k 0%
0 2 -61 56 -3.3k 1 -77 24 28 1.8 25M 9% 0.0 23 396 439k 0%
0 2 -61 56 -3.3k 1 -77 26 29 1.5 23M 22% 0.0 23 841 407k 0%
0 2 -60 55 -3.3k 1 -77 27 31 1.3 27M 11% 0.0 23 890 1.1M 0%
0 2 -59 54 -3.3k 1 -77 27 32 1.00 30M 3% 0.0 23 583 524k 0%
0 2 -59 54 -3.3k 1 -77 27 32 0.92 32M 1% 0.0 23 1.1k 503k 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -59 54 -3.3k 27 31 1.1 30M 4% 0.0 23 1.2k 529k 0%
0 2 -60 55 -3.3k 27 30 1.4 25M 18% 0.0 23 540 442k 0%
0 2 -61 56 -3.3k 26 29 1.6 23M 21% 0.0 23 536 429k 0%
0 2 -62 57 -3.3k 24 28 1.8 23M 13% 0.0 23 834 456k 0%
0 2 -62 57 -3.3k 1 -78 21 26 1.6 20M 7% 0.0 23 723 425k 0%
0 2 -63 58 -3.3k 1 -76 17 22 1.1 15M 3% 0.0 23 470 267k 0%
0 2 -64 59 -3.3k 1 -77 17 22 1.3 15M 3% 0.0 23 167 280k 0%
0 2 -65 60 -3.3k 1 -76 14 21 1.3 11M 2% 0.0 22 57 223k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.2 9.0M 3% 0.0 21 135 182k 0%
0 2 -66 61 -3.4k 1 -70 9.3 17 1.0 6.9M 2% 0.0 21 246 126k 0%
0 2 -67 62 -3.3k 1 -75 8.2 16 1.1 4.9M 3% 0.0 20 0.0 122k 0%
4 years ago
2f0125ef4e
Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging.
4 years ago
137e554eb3
reestablish pdcp bearers is required in case of AM bearers
4 years ago
079ae70e64
- Fix logs entries having two newlines instead of one. The old log formatter will delegate this to the new one.
4 years ago
1f2cca8909
in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy
4 years ago
edd5c50f9a
pass nas pdus after sending rrc reconf complete
4 years ago
cf89f4300a
fix ttcn3 to signal back to stack that a phy config has been completed
4 years ago
c6f4776a6f
send the nassdus sooner in the rrc reconf procedure
4 years ago
2416e274a7
fix rrc_meas_test. The phy now needs to signal back to the rrc that the phy config is complete
4 years ago
fc49b5a030
implemented rrc reconfiguration procedure that includes a continuation when phy configuration is complete
4 years ago
4c88404801
fix measurement report handling in case of intra enb handover
4 years ago
936e3b7bef
mac_test: add manual test for TC 7.1.4.6
4 years ago
5a9b1865e4
proc_bsr: fix typo
4 years ago
f73fa47a7b
pdu: fix printing of buffer state of long BSR
...
extracted wrong number of bits for 2nd LCID in long BSR
4 years ago
ef9d77c966
SRSUE: add PRACH config present field in PHY configuration structure
4 years ago
51b27fc255
Import latest srslog version ( #1796 )
...
* - Import latest srslog version.
- Adjusted the nas_test to create logs correctly.
- Remove timestamp formatting now that is provided by srslog.
4 years ago
924cc4f937
during cell selection, if the serving cell is ok, avoid calling serving cell configuration if the sibs are already acquired
4 years ago
4b1626bf24
fix eutra packing recovering during reestablishment in the srsenb
4 years ago
4e88daae21
Set DCI unpacking errors to info ( #1781 )
4 years ago
85544bb8d3
- Remove unnecessary newline character and optimize the code to use fputs instead of fprintf since no formatting is required.
4 years ago
dfeed52514
- Rename out_stream function to console.
4 years ago
62faef7c71
- Replaced all uses of the log::console method.
4 years ago
302f9793ca
- Add common utils to print to stdout and stderr as a first step to remove the log::console method.
4 years ago
58ce9d3959
pdcp: adding basic test to check if control PDUs are handled correctly
...
use a 3 B long status PDU to check if its dropped from the rx'ing entity
4 years ago
795db30338
pdcp: drop PDCP control PDUs
...
this patch adds a check to drop all PDCP control PDUs
in order to prevent handling them as data PDUs.
This could happen when the size exceeded the arbitrary length check.
This should fix #1787
4 years ago
b3eb9651d6
disable cqi in scells during handover procedure
4 years ago
f4c7021a5f
Appy phy configuration to current_phy_cfg before sending to PHY after HO
4 years ago
8a9a95a937
ensure sibs are acquired if cell selection calls cell search
4 years ago
af3ff5985e
removal of console print of last selected cell during the cell selection procedure.
4 years ago
c33e94fede
fix conformace 8_5_1_1 failure
4 years ago
045f647914
fix edge case where serving cell is good enough for reestablishment but the sibs are not yet acquired
4 years ago
f32d9f8322
ttcn3: call stop in UE dtor
...
fixes stop issue of TTCN3 DUT
4 years ago
d671e39c93
Fix SINR not correctly considering noise. Missed dBm conversion
4 years ago
5ecbe8fb17
cleanup of the reestablishment procedure state machine. It does not need to wait for the serving cell configuration because such procedure is already included in the cell selection procedure
4 years ago
b3bfe336a9
Make sure that remote address test has a ip mask
4 years ago
6ce5863f03
test/tft_test: Add a combined test for IPv6 packets
4 years ago
9ba8b62972
test/tft_test: Update filter test suite
...
The “IPv4 local address type” filter should be 9 bytes since it includes
not only the ip address, but also its subnet mask.
Quoting from 3GPP TS 24.008 10.5.6.12:
"""
For "IPv4 remote address type", the packet filter component value field
shall be encoded as a sequence of a four octet IPv4 address field and a
four octet IPv4 address mask field. The IPv4 address field shall be
transmitted first. For "IPv4 local address type", the packet filter
component value field shall be encoded as defined for "IPv4 remote
address type".
"""
Same for the ToS which also includes a 1 byte mask value
4 years ago
5783c01cbb
tf_packet_filter: Improve support for the different filter types
4 years ago
2890bd07ea
liblte_mme.h: Adjust LIBLTE_MME_PACKET_FILTER_MAX_SIZE for IPv6
...
Original was 20 but TS 24.008, section 10.5.6.12 specifies a max
of 60 for ipv6 packet filter
4 years ago
bb691f0cbe
Fix priority order in BSR trigger. Was not being triggered if SRB2 data was pending in the buffer ( #1771 )
4 years ago
942c28881d
converted member method of list of cells in the enb to a free function
4 years ago
3a924a1d80
avoid sending cellsToAddModList if cell offsets are zero
4 years ago
da70c0fdaf
fix cellsToAddModList handling. Now the eNB always adds PCell+SCells as measObjects in the RRC Reconfiguration messages. It may also further include cellsToAddModList if they are provided in the rr.conf file
4 years ago
8c30822350
Fix bug in update_measurements() not reporting in_sync in single carrier
4 years ago
0997daa7a0
now the handover procedure in the srsUE does not wait for the phy cell selection result. It only waits for the RA result
4 years ago
d375e305ec
Initial NR DMRS for PDSCH
4 years ago
c75c463263
Use SNR instead of SINR for RLF threshold ( #1769 )
...
* Use SNR instead of SINR for RLF threshold
* Send in/out-sync only for cc_idx=0
4 years ago
76bfc78147
Fix issues with Sounding-RS ( #1761 )
...
* Fix deadlock caused by update_measurements calling in_sync
* Fix overlapping SRS condition
* Do not use shortened PUSCH in transmissions and retx from RAR
* Revert "Fix deadlock caused by update_measurements calling in_sync"
This reverts commit f58c8c8c766f8f95baa3a3bf8287d8e25b2057ba.
4 years ago
2d321231df
fix reest proc. The reest proc state has to be set before launching the procedure, because the procedure can complete immediately on launch call
4 years ago
Andre Puschmann
Pedro Alvarez
Francisco Paisana
faluco
Xavier Arteaga
faluco
Ismael Gomez
Sylvain Munaut