cfc77118d3
disable console print of scell activation command during handover
4 years ago
d910c910a4
rrc::meas_cell now uses stack timers instead of system timers.
4 years ago
49ad1a4312
added unit test for meas cells
4 years ago
023d32975a
avoid use of pointers to meas_cells in ho_proc as they may become dangling
4 years ago
072b7be582
renamed rrc::cell_t to rrc::meas_cell
4 years ago
d02e8135fb
metrics_stdout: reset n_reports var after writing intermediate table header
4 years ago
0ef8e1fdac
rrc: include pci when logging serving cell measurement
...
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell
15:49:11.357447 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS: New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
4 years ago
6e0abd30dd
ue,phy_common: include Pcell PCI in cell measurements
...
this allows easier plotting in RRC when PHY cell
measurements already include the PCI
4 years ago
baf171d446
rrc: improve SR configuration logging
...
* move logging of SR max attempts into MAC logging
* log new MAC config whenever it is updated
4 years ago
bf7c2b800e
proc_sr: log error when trying to enable faulty SR config
4 years ago
04acc78c7d
metrics_test: add neighbor cell test
...
cleanup test and add neighbor cells so the displaying is tested
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal-------------Neighbour--DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 8 -33 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 8 -33 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
4 years ago
ddbf4e1645
metrics_stdout: print new table header if neighbour cells change
...
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.
--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -66 61 -3.3k 1 -76 11 18 1.1 8.4M 3% 0.0 21 262 167k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.1 9.6M 2% 0.0 22 476 214k 0%
0 2 -65 60 -3.3k 1 -76 16 22 1.3 13M 3% 0.0 23 1.1k 734k 0%
0 2 -64 59 -3.3k 1 -76 17 23 1.3 15M 2% 0.0 23 602 424k 0%
0 2 -63 58 -3.3k 1 -77 20 25 1.4 19M 3% 0.0 23 501 304k 0%
0 2 -62 57 -3.3k 1 -77 22 27 1.8 20M 10% 0.0 22 417 418k 0%
0 2 -61 56 -3.3k 1 -77 24 28 1.8 25M 9% 0.0 23 396 439k 0%
0 2 -61 56 -3.3k 1 -77 26 29 1.5 23M 22% 0.0 23 841 407k 0%
0 2 -60 55 -3.3k 1 -77 27 31 1.3 27M 11% 0.0 23 890 1.1M 0%
0 2 -59 54 -3.3k 1 -77 27 32 1.00 30M 3% 0.0 23 583 524k 0%
0 2 -59 54 -3.3k 1 -77 27 32 0.92 32M 1% 0.0 23 1.1k 503k 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -59 54 -3.3k 27 31 1.1 30M 4% 0.0 23 1.2k 529k 0%
0 2 -60 55 -3.3k 27 30 1.4 25M 18% 0.0 23 540 442k 0%
0 2 -61 56 -3.3k 26 29 1.6 23M 21% 0.0 23 536 429k 0%
0 2 -62 57 -3.3k 24 28 1.8 23M 13% 0.0 23 834 456k 0%
0 2 -62 57 -3.3k 1 -78 21 26 1.6 20M 7% 0.0 23 723 425k 0%
0 2 -63 58 -3.3k 1 -76 17 22 1.1 15M 3% 0.0 23 470 267k 0%
0 2 -64 59 -3.3k 1 -77 17 22 1.3 15M 3% 0.0 23 167 280k 0%
0 2 -65 60 -3.3k 1 -76 14 21 1.3 11M 2% 0.0 22 57 223k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.2 9.0M 3% 0.0 21 135 182k 0%
0 2 -66 61 -3.4k 1 -70 9.3 17 1.0 6.9M 2% 0.0 21 246 126k 0%
0 2 -67 62 -3.3k 1 -75 8.2 16 1.1 4.9M 3% 0.0 20 0.0 122k 0%
4 years ago
2f0125ef4e
Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging.
4 years ago
1f2cca8909
in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy
4 years ago
edd5c50f9a
pass nas pdus after sending rrc reconf complete
4 years ago
cf89f4300a
fix ttcn3 to signal back to stack that a phy config has been completed
4 years ago
c6f4776a6f
send the nassdus sooner in the rrc reconf procedure
4 years ago
2416e274a7
fix rrc_meas_test. The phy now needs to signal back to the rrc that the phy config is complete
4 years ago
fc49b5a030
implemented rrc reconfiguration procedure that includes a continuation when phy configuration is complete
4 years ago
936e3b7bef
mac_test: add manual test for TC 7.1.4.6
4 years ago
5a9b1865e4
proc_bsr: fix typo
4 years ago
ef9d77c966
SRSUE: add PRACH config present field in PHY configuration structure
4 years ago
51b27fc255
Import latest srslog version ( #1796 )
...
* - Import latest srslog version.
- Adjusted the nas_test to create logs correctly.
- Remove timestamp formatting now that is provided by srslog.
4 years ago
924cc4f937
during cell selection, if the serving cell is ok, avoid calling serving cell configuration if the sibs are already acquired
4 years ago
4e88daae21
Set DCI unpacking errors to info ( #1781 )
4 years ago
dfeed52514
- Rename out_stream function to console.
4 years ago
62faef7c71
- Replaced all uses of the log::console method.
4 years ago
b3eb9651d6
disable cqi in scells during handover procedure
4 years ago
f4c7021a5f
Appy phy configuration to current_phy_cfg before sending to PHY after HO
4 years ago
8a9a95a937
ensure sibs are acquired if cell selection calls cell search
4 years ago
af3ff5985e
removal of console print of last selected cell during the cell selection procedure.
4 years ago
c33e94fede
fix conformace 8_5_1_1 failure
4 years ago
045f647914
fix edge case where serving cell is good enough for reestablishment but the sibs are not yet acquired
4 years ago
f32d9f8322
ttcn3: call stop in UE dtor
...
fixes stop issue of TTCN3 DUT
4 years ago
d671e39c93
Fix SINR not correctly considering noise. Missed dBm conversion
4 years ago
5ecbe8fb17
cleanup of the reestablishment procedure state machine. It does not need to wait for the serving cell configuration because such procedure is already included in the cell selection procedure
4 years ago
b3bfe336a9
Make sure that remote address test has a ip mask
4 years ago
6ce5863f03
test/tft_test: Add a combined test for IPv6 packets
4 years ago
9ba8b62972
test/tft_test: Update filter test suite
...
The “IPv4 local address type” filter should be 9 bytes since it includes
not only the ip address, but also its subnet mask.
Quoting from 3GPP TS 24.008 10.5.6.12:
"""
For "IPv4 remote address type", the packet filter component value field
shall be encoded as a sequence of a four octet IPv4 address field and a
four octet IPv4 address mask field. The IPv4 address field shall be
transmitted first. For "IPv4 local address type", the packet filter
component value field shall be encoded as defined for "IPv4 remote
address type".
"""
Same for the ToS which also includes a 1 byte mask value
4 years ago
5783c01cbb
tf_packet_filter: Improve support for the different filter types
4 years ago
bb691f0cbe
Fix priority order in BSR trigger. Was not being triggered if SRB2 data was pending in the buffer ( #1771 )
4 years ago
8c30822350
Fix bug in update_measurements() not reporting in_sync in single carrier
4 years ago
0997daa7a0
now the handover procedure in the srsUE does not wait for the phy cell selection result. It only waits for the RA result
4 years ago
c75c463263
Use SNR instead of SINR for RLF threshold ( #1769 )
...
* Use SNR instead of SINR for RLF threshold
* Send in/out-sync only for cc_idx=0
4 years ago
76bfc78147
Fix issues with Sounding-RS ( #1761 )
...
* Fix deadlock caused by update_measurements calling in_sync
* Fix overlapping SRS condition
* Do not use shortened PUSCH in transmissions and retx from RAR
* Revert "Fix deadlock caused by update_measurements calling in_sync"
This reverts commit f58c8c8c766f8f95baa3a3bf8287d8e25b2057ba.
4 years ago
2d321231df
fix reest proc. The reest proc state has to be set before launching the procedure, because the procedure can complete immediately on launch call
4 years ago
86f4d469c6
Added some functions to save and restore AS keys for the case of failed handover in the USIM
4 years ago
81ab4c1a65
make sure ho procedure waits for t304 expiry in all cases
4 years ago
b94d24ed98
Take into account CRS from neigbhour cells when measuring interference ( #1757 )
...
* Take into account CRS from neigbhour cells when measuring interference
* fix std::isnormal compilation
* Fixed compilation of test
* Address comments
* Remove unused overrides
4 years ago
cf89d6645b
add comments explaining each function of the reest procedure
4 years ago
d068d594af
implemented rrc reestablishment procedure part after sending reest request
4 years ago
7d6c9a1751
Add cause and cell pci to reestablishment console message
4 years ago
73e21daeb2
refactor reestablishment procedure to more closely follow TS.
4 years ago
1afc137032
[REBASE] Make PHY non-blocking and fefactor HO procedure ( #1753 )
...
* Make PHY non-blocking and fefactor HO procedure
* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers
Co-authored-by: Ismael Gomez <ismagom@gmail.com>
4 years ago
399b986d0b
Fix deadlock caused by update_measurements calling in_sync ( #1760 )
4 years ago
eb370642ab
verify cell selection observer is set before calling it
4 years ago
7f8af023b8
added a callback that always gets triggered when the phy cell selection completes. This callback checks if cell selection failed, and if so, sets the rsrp of the selected cell to -infinity
4 years ago
f0d651ae8e
- Fixed a leak in the MME class not releasing the static byte buffer pool.
...
- Now the pool gets destroyed on program exit using a unique_ptr.
- Removed manual cleanup() calls in all the code base to free the pool instance.
4 years ago
5968157ea5
Protect better the access to shared variables in phy_common and metrics ( #1750 )
4 years ago
eeb2b904aa
ue,rach: fix failing RACH proc when Msg3 grant RNTI matches current CRNTI
...
this was preventing that the Temp-CRNTI used in the RAR to be identical
to the currently configured C-RNTI of the UE.
The issue simply was that the RACH procedure was declared successful too
early, even before the Msg3 UL grant was filled with the Msg3 content.
The patch moves the logic that detects the successful completion of
the RACH procedure below the Msg3 packing.
4 years ago
a36f9bddc2
ttcn3: use RNTI values in RACH provided by tester
...
this patch extends the SS to use the C-RNTI and Temp CRNTI values
provided by the tester for RAR and Msg3.
4 years ago
e14cb4b405
- Fix a missing thread join in the phy which caused a memory leak.
4 years ago
5acc1c9a73
- Cleaned up style in the PRACH class:
...
* Removed magic numbers.
* Reduced indentation of statements with early exists.
* Removed elses after a return statement.
* Trimmed unnecessary include files.
* Default initialized members in the class.
4 years ago
b6bbe8761a
- Remove left over printf.
4 years ago
79f5b62551
- Calculate PRACH buffers on the fly when required instead of pregenerating all of them.
4 years ago
b616944a13
ue,rrc: fix security config during HO/reestablishment
...
we fix a number of very related issues for HO/reestablishment
in the success/error case:
* this patch removes the hard-coded check that intra-cell HO aren't
allowed. There are cases where eNBs use this method to update
the security context.
* the patch also fixes an issue after failed HO where the security context
of the source eNB should be used for the reestablishment.
* update security keys according to specs when mobilitycontrol
indicated change of key
4 years ago
d90de639e5
ttcn3_syssim: continue when epoll returns -1
...
this allows to debug and step in the SS
4 years ago
1b266257a1
ttcn3_phy: improve logging of cell measurements
4 years ago
6827c2df21
rrc_meas: disable layer3 filtering until quantity config is received
...
the filter alpha was initialized to zero by default which causes an
issue because the first measurement for a cell can't be updated,
because the filtering function will always return the current value.
According to 36.331 Sec 5.5.3.2 Note 2, a k-value of 0 should turn
off filtering, which should be used as the default value until
an update is received from the network.
4 years ago
97133894e6
the Ocs value used in the measReport triggering decision was not being set correctly. The enum of the cell individual offset in the measCfg was being cast to an int and stored. Instead what we want is to store the actual offset value using the ASN1 enum->number lookup table.
4 years ago
44c2412be2
SRSUE: silent PUSCH encoding error by dropping invalid grant
4 years ago
739c0c5c00
altered plmn search procedure handling of failed cell searches. If a cell search procedure fails due to inability to select a cell or acquire SIB1, the plmn search carries on for other frequencies.
4 years ago
3088cdbb0f
ttcn3: fix uncaught exception in SS
...
fix accessing child element in parsed Json without checking
its existence.
4 years ago
8df388ba3e
usim: fix typo in log
4 years ago
3e824f6370
ttcn3: convert TTI action vector to queue
...
this makes sures queued events are executed FIFO
4 years ago
624c8142ad
ttcn3: refactor cell handling in SS
...
this rather large patch changes the way cells are handled in the SS.
It moves RLC and PDCP entities to the cell map of the SS, such that each cell
has its own entities. This allows to support HO operation, for example,
in which two cells need to send SRB messages.
It also extends most of the syssim interface to include the cell name
in all commands so they can be applied on the specified cell only.
4 years ago
4650a620d9
ttcn3: refactor cell search and selection in TTCN3 PHY
...
- make sure only suitable cells are reported/selected
4 years ago
973de8f78d
ttcn3_dut: block OS signals before starting log backend
...
this prevents the backend thread from handling the signals. they
are only handled by epoll running in the main thread.
this fixes #1713
4 years ago
b397878d25
Fix comments in ue.conf
4 years ago
c178e362b8
- Rewrite log management so that a log sink can be swapped for each testcase.
4 years ago
5e8a4c898d
Bring back the circular array object. ( #1712 )
4 years ago
52355024e7
SRSUE PHY: move mutex lock to cc worker and unlock for stack calls
4 years ago
4c1d3ef7e8
Fix implementation of Random Access problem ( #1689 )
...
* Fix implementation of Random Access problem
* Apply AS activated condition on RLF before calling Reestablishment
4 years ago
f49fbd6d02
Fix the order of HO/reest measurement actions ( #1696 )
4 years ago
c16ac6c890
ue_stack: only push sync event to event queue is stack is still running
...
stopping the UE in ZMQ mode caused a dead-lock because the Stack was
stopped before the PHY causing the sync queue to overflow. Since we
use a queue-length of 1 in ZMQ, mode, the PHY sync thread was blocking to
push a new sync event while the stack thread was already stopped.
this patch makes sure no new sync events are queued after the stack has
been terminated.
4 years ago
aec18a93d1
mux,bsr: refactor UL buffer status reporting
...
this patch fixes the UL BSR as per TS 36.321, it includes following
main changes:
* report UL buffer state to reflect the UEs transmit buffer after
the MAC UL PDU containing the BSR has been built.
In other words, if the UE, for example, can transmit all outstanding
data in an UL grant, it will not report any pending data to transmit.
* refactor MUX routines and subheader space calculation
4 years ago
92d76a5eb6
mac_test: update tests involving BSR handling
...
* split existing BSR test into dedicated test for short, long, and trunc
BSR tests
* update MAC tests that include packing UL BSR.
(After checking TS 36.321 again it seems we have reported old UL buffer states)
4 years ago
54eed11e1d
Refactor decision for extended CSI/SRS
4 years ago
51521ad8e4
Improved PDCCH blind search and fixed a few issues with ambiguous DCI size with Release 10
4 years ago
14289ebcc6
dl_harq: lower log level when MCS changes in DL grant to debug
...
fixes #1489
this is normal behavior and should not result in a warning message.
4 years ago
06a5bdaab2
Process all calls to RLF in the main RRC task
4 years ago
92221eb780
update of rrc_interface_mac to remove signal from mac to rrc that RA failed in case of handover failure
4 years ago
46e1e101d3
removal of unecessary ho_ra_complete(false) in mac. In case of HO failure, the rrc should let the t304 expire
4 years ago
aed9120458
in case of RA problem during handover, the UE cannot trigger RLF. It has to let t304 expire, which will then trigger the reestablishment procedure with the right cause
4 years ago
fca1273b3e
avoid spurious warnings of trying to start the PRACH when it is already running during handover
4 years ago
fddcc3d8ea
In the case of Handover, postpone the activation of the CQI and SR config present in the HO command for after the RA proc completion to the target eNB
4 years ago
641a4a5e79
mac_test: fix compilation if PCAP write is enabled
4 years ago
49a7a90698
mac: simplify BSR packing logic
...
simplify logic to check whether a BSR fits and, if so, which type.
before the check has been done in two places.
we now also accomodate for the CE subheader size.
4 years ago
6364a4513c
mac_pdu: fix issue when packing CE but no space left in PDU
...
we've not checked the return value when adding a new CE, like BSR or PHR,
for a UL MAC PDU. For very small UL grants, this could fail and
we need to remove the subheader again before packing the PDU.
This fixes issue #1649 .
4 years ago
7d0ae71f17
ttcn3_sys_interface: Handle initial cell attenuation
...
When new Cells are added they can have an attenuation configured
directly. Honor that setting.
4 years ago
Francisco Paisana
Andre Puschmann
Pedro Alvarez
Xavier Arteaga
faluco
Ismael Gomez
faluco
Sylvain Munaut
Daniel Willmann