83 Commits (3102861ee3619ff5461cf60c2cce34fea530be57)

Author SHA1 Message Date
Francisco 200006c4b7 bugfix,scheduler: avoid offset to increase decrease unboundedly when mcs is equal to 0 or max_mcs 4 years ago
Francisco 7076dbfef8 feature, scheduler: Add configuration parameter to set minimum TTI interval between TPCs 4 years ago
Francisco dedd9c09a7 feature, scheduler: Add abitility to set minimum aggregation level in PDCCH, and disable adaptive aggregation level based on target BLER 4 years ago
Francisco 1f1665bab7 improve adaptive offset adjustment log lines 4 years ago
Francisco c5029fc266 feature - implement adaptive link adaptation in DL and UL 4 years ago
yagoda 9501283c1c fixing support for extended Cyclic Prefix
small cosmetic fixes of CP code
4 years ago
yagoda f90f6f0c7e adding MAC 0 padding support 4 years ago
Francisco 9464f36714 make eNB UE release timer after RLF detection configurable 4 years ago
Francisco c5396155ad set default gtpu tunnel close timeout to infinity 4 years ago
Francisco c6b9c12ba2 gtpu, feature - added the ability to configure gtpu indirect tunnel timeout value. This parameter is useful in the case that the end marker is not received 4 years ago
Francisco 7bee75e126 update description of srsenb --expert.nof_prealloc_ues config parameter, and added a comment in header file explaining the use of such parameter. 4 years ago
Francisco 5818488b27 change enb max_nof_ues config parameter to nof_prealloc_ues 4 years ago
Francisco 9739a9de5f add missing srsenb expert parameter to enb.conf.example 4 years ago
herlesupreeth 0f06ec0d9c Add feature to provide custom GTP-U (S1) address to be advertised inside S1AP messages
This feature is useful in scenarios where eNB is behind a NAT and EPC on public cloud
Since eNB's GTP-U can only bind to IP address visible in it's host (usually a private IP beind a NAT), it advertises the same to UE in S1AP message
resulting in traffic from EPC to eNB (DL traffic) not able to reach eNB. This commit solves this issue by providing a means to advertise a different IP address than the one GTP-U UDP socket is bound to.
This IP is usually advertised in InitialContextSetupResponse and E-RABSetupResponse.

In order to make use of this feature, use the following parameter in enb.conf

Example:

gtp_advertise_addr = 213.61.141.82
4 years ago
Pedro Alvarez 696de22a28 Change default maximum number of KOs to 100 4 years ago
Pedro Alvarez b2b7d8f617 Set rlf_timer timeout once. Make activity timer expiry also stops rlf_timer 4 years ago
Pedro Alvarez 8194b5ec73 Added check for consequetive KOs in MAC. Change set_activity_user to pass activity and max KOs to RRC and trigger RLF timeout. 4 years ago
yagoda 62b3615268 fixing sched config parameters 4 years ago
faluco 173dcdd421 - Import latest srslog version.
- Remove string allocs in some log lines in radio.cc.

Add new tracing buffer capcity options into srsenb and srsue.

Add missing file.
4 years ago
faluco 60cd649b8f Add a short description of the tracing options inside the config files. 4 years ago
faluco 2b990e195c Allow specifying a custom filename for event tracing. 4 years ago
faluco d805ce01a6 - Add a flag in the enb confi file to control tracing. 4 years ago
David Rupprecht aef6805d03 Added pcap net feature to eNodeB 4 years ago
Ismael Gomez 0498439d41
Backport some changes from FAPI branch (#2124)
* Reorder DCI FORMAT enum

* Fix endianness issue

* Fix return codes in phy_ue_db

* Log members should be destructed after the layers.

* Add JSON metrics and Events. Add Alarm log channel. Simplify MAC metrics struct.

* Restore metrics_stdout change
4 years ago
Francisco 8fb3ea6922 Added the ability to choose scheduling policy from enb.conf
- The two options provided at the moment are time-domain RR and PF
4 years ago
Andre Puschmann 9be7dc9572 enb: fix AWGN config example and help message
we've moved to SNR rather than channel noise so this fixes the example and help text
4 years ago
Andre Puschmann a0ff8d3226 enb.conf.example: add comment about device args for 75 PRB cells 4 years ago
Jan df46a3284c Add missing device names to enb.conf.example
The enb.conf.example config was missing the options "soapy" and "zmq" for device_name.
4 years ago
Andre Puschmann b2576b34b9 enb.conf.example: comment PUSCH MCS limit in example 4 years ago
Francisco Paisana afb2674dd0 update enb.conf.example option for inactivity_timer 4 years ago
Andre Puschmann ce5129467c correct default value of PHY threads in eNB and UE examples 4 years ago
Andre Puschmann 4fd5395903 change default EARFCN to 3350 or 2.68GHz
as 3400 or 2.685 GHz is on the edge of band 7, some phones won't connect
to a 20 MHz cell on this EARFCN.

In order to simplify testing with other bandwidths we change the default EARFCN.
4 years ago
Pedro Alvarez 8e00febb1d srsENB: Derive inactivity timeout from T310 and T311 and N310. 4 years ago
Ismael Gomez 493b7ea2da Remove SNR threshold based link failure detection 4 years ago
Pedro Alvarez 51f8ba60da Make MBMS MCS configurable for the eNB. 5 years ago
Pedro Alvarez 2ea78c8feb Added configuration options for stack logging. 5 years ago
Andre Puschmann 3aa0179caf {ue,enb}.conf.example: add zmq examples to config
the examples are commented but by just uncommenting those
two lines the user should be able to run a eNB and UE on the same
machine in SISO mode over ZMQ
5 years ago
Xavier Arteaga 8e891b7038 Added AWGN channel to SRSUE and SRSENB 5 years ago
Francisco Paisana 5ee96079a2 added nof ctrl symbols of CFI to enb.conf 5 years ago
Pedro Alvarez 8c58d1054a Changed pcap.mac_enable back to pcap.enable in eNB. 5 years ago
Pedro Alvarez 08a4ce0970 Added the ability to save S1AP pcaps at the eNB. 5 years ago
Andre Puschmann 120ad76c63 refactor cell param handling and fix SIB transmissions
- move cell specific eNB params to cell list in rr.conf
- make sure DL EARFCN and DL freq can be used to manually overwrite a single cell config
- fix SIB packing and transmission for multi cell configs
- introduce cell list to MAC
- adapt default enb.conf.example and rr.conf.example
5 years ago
Ismael Gomez 4e12405fff
Remove radio_multi class and organize channels, ports and carrier buffers (#1019) 5 years ago
Aleksander Morgado 52ce1fbfd1 enb: fix list of logging layers in conf example
Added 'phy_lib' and 's1ap', removed 'nas'.

As per the srsenb help:
  $ srsenb --help | grep level | grep log
    --log.rf_level arg                    RF log level
    --log.phy_level arg                   PHY log level
    --log.phy_lib_level arg (=none)       PHY lib log level
    --log.mac_level arg                   MAC log level
    --log.rlc_level arg                   RLC log level
    --log.pdcp_level arg                  PDCP log level
    --log.rrc_level arg                   RRC log level
    --log.gtpu_level arg                  GTPU log level
    --log.s1ap_level arg                  S1AP log level
    --log.all_level arg (=info)           ALL log level
5 years ago
yagoda ca0922ddc6 adding missing embms section header to enb.conf 5 years ago
Ismael Gomez 3828e03f33
Refactor in eNodeB, add channel emulator and fixes in OFDM
* Added channel emulator to srsENB. Added support for fixed delay

* Bug in OFDM when using nonguru mode

* A few changes and refactor in eNodeB
5 years ago
Ismael Gomez 9325aaddf2 Do not change master clock rate if not necessary. Hint in ue/enb configs for low BW cells 5 years ago
Andre Puschmann 343c30be4a fix RF metrics/logging in eNB 5 years ago
Harald Welte 44977bcdec [ENB] enb.conf.example: Mention WRITE_SIB_PCAP
The documentation talks about a MAC protocol trace, but in fact
it is only a protocol trace of dedicated channels.  There's a related
define in the source code, but that's not documented.

Let's at least make the user aware that the MAC pcap trace is
for dedicated channels only, unless he uses that #define.
5 years ago
Andre Puschmann e60a4490d2 streamline embms parameters and fix MCS selection 5 years ago