* Replaced UE logger in the ue class.
* Replaced loggers in the main phy class and prach.
* Replaced loggers in phy common and ta_control.
* Replace loggers in cc and sf workers.
* Replaced loggers in intra_measure, scell_recv, search, sfn_sync, sync.
* Remove last uses of the old loggers in the main phy class.
* Remove stray newline in logs.
* Replaced loggers in ue gw.
* - Started to replace loggers in the ue stack.
- Replaced loggers in usim and pcsc.
- Adapted nas and usim tests.
* Replace loggers in nas.
* Added missing log init calls in two previously modified tests.
* Replaced logger in nas idle procs.
* Replaced loggers in nas emm state.
* Replaced loggers in tft packet filter and adapted tft test.
* Replaced loggers in main RRC class.
* Replaced loggers in RRC cell.
* Replaced loggers in RRC meas.
* Replaced loggers in rrc procedures.
* Started logger replacement in MAC layer, more precisely in demux and dl_harq classes.
Been unable to inject loggers in construction for dl_tb_process due to very weird static assertions in the std::vector code being the type not constructible which is not true, so instead use the main MAC logger directly.
* Replaced loggers in mac mux class.
* Replaced loggers in mac pro_bsr.
* Replaced loggers in mac proc phr.
* Replaced loggers in mac proc SR and RA.
* Replace loggers in mac UL HARQ.
* Replaced loggers in main ue stack class.
* Fixed nas test crashing due to a null string.
* Ported mac_test to use the new loggers.
* Removed TTI reporting for the PHY log as the old logger did.
* Replaced loggers in UE phy tests.
* Configure loggers in nas_test.
* Replaced loggers in rrc_meas_test.
* Replaced loggers in rrc_reconfig_test.
* Added missing newline in tft_test.
* Fix compilation errors in TTCN3 tests.
* Fix linker error detected in CI and warning.
* Replaced loggers in TTCN3 tests.
* Fix a text replace error in some log messages.
* Remove trailing newlines from log entries.
* Remove old logger from rrc.
* Flush backend before printing the test status.
* - Fix compilation error from previous rebase.
- Remove trailing newlines from some missing log entries.
* Make PHY non-blocking and fefactor HO procedure
* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers
Co-authored-by: Ismael Gomez <ismagom@gmail.com>
this rather large patch changes the way cells are handled in the SS.
It moves RLC and PDCP entities to the cell map of the SS, such that each cell
has its own entities. This allows to support HO operation, for example,
in which two cells need to send SRB messages.
It also extends most of the syssim interface to include the cell name
in all commands so they can be applied on the specified cell only.
before the BSR was extracted but the actual index (between 0 and 63)
was not stored but directly converted into bytes.
for log parsing and debugging it is easier to follow the index
value. this patch therefore adds both values to the log message
and extends the API accordingly.
this patch refactors the SDU queuing and dropping policy of the RLC and PDCP layer.
the previous design had issues when packets have been generated at a higher
rate above the PDCP than they could be consumed below the RLC.
When the RLC SDU queues were full, we allowed two policies, one to block on the write
and the other to drop the SDU. Both options are not ideal because they either
lead to a blocking stack thread or to lost PDCP PDUs.
To avoid this, this patch makes the following changes:
* PDCP monitors RLC's SDU queue and drops packets on its north-bound SAP if queues are full
* a new method sdu_queue_is_full() has been added to the RLC interface for PDCP
* remove blocking write from pdcp and rlc write_sdu() interface
* all writes into queues need to be non-blocking
* if Tx queues are overflowing, SDUs are dropped above PDCP, not RLC
* log warning if RLC still needs to drop SDUs
* this case should be avoided with the monitoring mechanism
reducing the sync queue len to 1 caused an issue when the
PHY was locking the mutex while trying to push a TTI event
on the stack.
instead of signaling the new TTI within the PHY, we now do it outside
in the DUT (after releasing the PHY mutex)
apply same change that we've done on the eNB also on the UE
to avoid the PHY processing TTIs faster than the stack.
Without that, we see lots of those in the logs:
...
08:39:17.580325 [STCK] [W] Detected slow task processing (sync_queue_len=7).
...
unfortunately, the rapidjson version shipped with Ubuntu 16.04
doesn't support the GetArray() API so we need to use
normal iterator to loop over the array
David Rupprecht
faluco
faluco
Andre Puschmann
Xavier Arteaga
Francisco Paisana
Daniel Willmann
Pedro Alvarez