Adding UE context release command. Fixing issue when identity response is integrity protected.

master
Pedro Alvarez 7 years ago
parent 24d394d8ca
commit 2cb1f27ddb

@ -50,7 +50,7 @@ public:
bool send_initial_context_setup_request(uint32_t mme_ue_s1ap_id, struct srslte::gtpc_create_session_response *cs_resp, struct srslte::gtpc_f_teid_ie sgw_ctrl_fteid);
bool handle_initial_context_setup_response(LIBLTE_S1AP_MESSAGE_INITIALCONTEXTSETUPRESPONSE_STRUCT *in_ctxt_resp);
bool handle_ue_context_release_request(LIBLTE_S1AP_MESSAGE_UECONTEXTRELEASEREQUEST_STRUCT *ue_rel, struct sctp_sndrcvinfo *enb_sri, srslte::byte_buffer_t *reply_buffer, bool *reply_flag);
bool pack_ue_context_release_request(uint32_t mme_ue_s1ap_id, srslte::byte_buffer_t *reply_buffer);
bool send_ue_context_release_command(ue_ecm_ctx_t *ecm_ctx, srslte::byte_buffer_t *reply_buffer);
private:
s1ap_ctx_mngmt_proc();

@ -309,36 +309,44 @@ s1ap_ctx_mngmt_proc::handle_ue_context_release_request(LIBLTE_S1AP_MESSAGE_UECON
}
bool
s1ap_ctx_mngmt_proc::pack_ue_context_release_request(uint32_t mme_ue_s1ap_id, srslte::byte_buffer_t *reply_buffer)
s1ap_ctx_mngmt_proc::send_ue_context_release_command(ue_ecm_ctx_t *ecm_ctx, srslte::byte_buffer_t *reply_buffer)
{
int s1mme = m_s1ap->get_s1_mme();
//Prepare reply PDU
LIBLTE_S1AP_S1AP_PDU_STRUCT pdu;
bzero(&pdu, sizeof(LIBLTE_S1AP_S1AP_PDU_STRUCT));
pdu.choice_type = LIBLTE_S1AP_S1AP_PDU_CHOICE_INITIATINGMESSAGE;
LIBLTE_S1AP_INITIATINGMESSAGE_STRUCT *init = &pdu.choice.initiatingMessage;
init->procedureCode = LIBLTE_S1AP_PROC_ID_UECONTEXTRELEASEREQUEST;
init->choice_type = LIBLTE_S1AP_INITIATINGMESSAGE_CHOICE_UECONTEXTRELEASEREQUEST;
init->procedureCode = LIBLTE_S1AP_PROC_ID_UECONTEXTRELEASE;
init->choice_type = LIBLTE_S1AP_INITIATINGMESSAGE_CHOICE_UECONTEXTRELEASECOMMAND;
LIBLTE_S1AP_MESSAGE_UECONTEXTRELEASECOMMAND_STRUCT *ctx_rel_cmd = &init->choice.UEContextReleaseCommand;
ctx_rel_cmd->UE_S1AP_IDs.choice_type = LIBLTE_S1AP_UE_S1AP_IDS_CHOICE_UE_S1AP_ID_PAIR;
ctx_rel_cmd->UE_S1AP_IDs.choice.uE_S1AP_ID_pair.mME_UE_S1AP_ID.MME_UE_S1AP_ID = ecm_ctx->mme_ue_s1ap_id;
ctx_rel_cmd->UE_S1AP_IDs.choice.uE_S1AP_ID_pair.eNB_UE_S1AP_ID.ENB_UE_S1AP_ID = ecm_ctx->enb_ue_s1ap_id;
ctx_rel_cmd->Cause.choice_type = LIBLTE_S1AP_CAUSE_CHOICE_NAS;
ctx_rel_cmd->Cause.choice.nas.ext = false;
ctx_rel_cmd->Cause.choice.nas.e = LIBLTE_S1AP_CAUSENAS_NORMAL_RELEASE;
LIBLTE_S1AP_MESSAGE_UECONTEXTRELEASEREQUEST_STRUCT *ctx_rel_req = &init->choice.UEContextReleaseRequest;
/*
typedef struct{
bool ext;
LIBLTE_S1AP_MME_UE_S1AP_ID_STRUCT MME_UE_S1AP_ID;
LIBLTE_S1AP_ENB_UE_S1AP_ID_STRUCT eNB_UE_S1AP_ID;
LIBLTE_S1AP_CAUSE_STRUCT Cause;
LIBLTE_S1AP_GWCONTEXTRELEASEINDICATION_ENUM_EXT GWContextReleaseIndication;
bool GWContextReleaseIndication_present;
}LIBLTE_S1AP_MESSAGE_UECONTEXTRELEASEREQUEST_STRUCT;
*/
LIBLTE_ERROR_ENUM err = liblte_s1ap_pack_s1ap_pdu(&pdu, (LIBLTE_BYTE_MSG_STRUCT*)reply_buffer);
if(err != LIBLTE_SUCCESS)
{
m_s1ap_log->error("Could not pack Initial Context Setup Request Message\n");
return false;
}
//Send Reply to eNB
int n_sent = sctp_send(s1mme,reply_buffer->msg, reply_buffer->N_bytes, &ecm_ctx->enb_sri, 0);
if(n_sent == -1)
{
m_s1ap_log->error("Failed to send Initial Context Setup Request\n");
return false;
}
return true;
}

@ -234,7 +234,7 @@ s1ap_mngmt_proc::pack_s1_setup_response(s1ap_args_t s1ap_args, srslte::byte_buff
LIBLTE_S1AP_SERVEDGUMMEISITEM_STRUCT *serv_gummei = &s1_resp->ServedGUMMEIs.buffer[0];
serv_gummei->ext=false;
//serv_gummei->iE_Extensions=false;
serv_gummei->iE_Extensions_present = false;
uint32_t plmn=0;
srslte::s1ap_mccmnc_to_plmn(s1ap_args.mcc, s1ap_args.mnc, &plmn);
@ -257,7 +257,9 @@ s1ap_mngmt_proc::pack_s1_setup_response(s1ap_args_t s1ap_args, srslte::byte_buff
//Relay Unsupported
s1_resp->MMERelaySupportIndicator_present=false;
s1_resp->CriticalityDiagnostics_present = false;
liblte_s1ap_pack_s1ap_pdu(&pdu, (LIBLTE_BYTE_MSG_STRUCT*)msg);
return true;

@ -158,15 +158,27 @@ s1ap_nas_transport::handle_uplink_nas_transport(LIBLTE_S1AP_MESSAGE_UPLINKNASTRA
ue_emm_ctx = m_s1ap->find_ue_emm_ctx_from_imsi(ue_ecm_ctx->imsi);
if(ue_emm_ctx == NULL)
{
m_s1ap_log->warning("Uplink NAS: could not find security context for integrity protected message. MME-UE S1AP id: %lu\n",mme_ue_s1ap_id);
m_pool->deallocate(nas_msg);
return false;
//No EMM context found.
//Perhaps a temporary context is being created?
//This can happen with integrity protected identity reponse and authentication response messages
if( !(msg_type == LIBLTE_MME_MSG_TYPE_IDENTITY_RESPONSE && sec_hdr_type == LIBLTE_MME_SECURITY_HDR_TYPE_INTEGRITY) &&
!(msg_type == LIBLTE_MME_MSG_TYPE_AUTHENTICATION_RESPONSE && sec_hdr_type == LIBLTE_MME_SECURITY_HDR_TYPE_INTEGRITY))
{
m_s1ap_log->warning("Uplink NAS: could not find security context for integrity protected message. MME-UE S1AP id: %lu\n",mme_ue_s1ap_id);
m_pool->deallocate(nas_msg);
return false;
}
}
}
if(sec_hdr_type == LIBLTE_MME_SECURITY_HDR_TYPE_PLAIN_NAS)
if( sec_hdr_type == LIBLTE_MME_SECURITY_HDR_TYPE_PLAIN_NAS ||
(msg_type == LIBLTE_MME_MSG_TYPE_IDENTITY_RESPONSE && sec_hdr_type == LIBLTE_MME_SECURITY_HDR_TYPE_INTEGRITY) ||
(msg_type == LIBLTE_MME_MSG_TYPE_AUTHENTICATION_RESPONSE && sec_hdr_type == LIBLTE_MME_SECURITY_HDR_TYPE_INTEGRITY))
{
//Plain NAS, only identity response is valid.
//Only identity response and authentication response are valid as plain NAS.
//Sometimes authentication response and identity are sent as integrity protected,
//but these messages are sent when the securty context is not setup yet, so we cannot integrity check it.
//FIXME Double-check
switch(msg_type)
{
case LIBLTE_MME_MSG_TYPE_IDENTITY_RESPONSE:
@ -220,17 +232,17 @@ s1ap_nas_transport::handle_uplink_nas_transport(LIBLTE_S1AP_MESSAGE_UPLINKNASTRA
//Integrity protected NAS message, possibly chiphered.
ue_emm_ctx->security_ctxt.ul_nas_count++;
mac_valid = integrity_check(ue_emm_ctx,nas_msg);
if(!mac_valid && msg_type != LIBLTE_MME_MSG_TYPE_AUTHENTICATION_RESPONSE){
if(!mac_valid){
m_s1ap_log->warning("Invalid MAC in NAS message type 0x%x.\n", msg_type);
m_pool->deallocate(nas_msg);
return false;
}
switch (msg_type) {
case LIBLTE_MME_MSG_TYPE_AUTHENTICATION_RESPONSE:
/*case LIBLTE_MME_MSG_TYPE_AUTHENTICATION_RESPONSE:
m_s1ap_log->info("Uplink NAS: Received Authentication Response\n");
m_s1ap_log->console("Uplink NAS: Received Authentication Response\n");
handle_nas_authentication_response(nas_msg, ue_ecm_ctx, reply_buffer, reply_flag);
break;
break;*/
case LIBLTE_MME_MSG_TYPE_ATTACH_COMPLETE:
m_s1ap_log->info("Uplink NAS: Received Attach Complete\n");
m_s1ap_log->console("Uplink NAS: Received Attach Complete\n");
@ -599,7 +611,7 @@ s1ap_nas_transport::handle_nas_service_request(uint32_t m_tmsi,
//Service request to Connected UE.
//Delete ECM context and connect.
m_mme_gtpc->send_delete_session_request(ecm_ctx);
//pack_context_release_request();
//m_s1ap send_context_release_request(ecm_ctx, reply_buffer);
}
else
{

Loading…
Cancel
Save