diff --git a/CMakeLists.txt b/CMakeLists.txt
index 4672271ba..43cea2f13 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -551,3 +551,5 @@ if(ENABLE_SRSEPC)
 else(ENABLE_SRSEPC)
   message(STATUS "srsEPC build disabled")
 endif(ENABLE_SRSEPC)
+
+add_subdirectory(test)
\ No newline at end of file
diff --git a/test/CMakeLists.txt b/test/CMakeLists.txt
new file mode 100644
index 000000000..dd74ca349
--- /dev/null
+++ b/test/CMakeLists.txt
@@ -0,0 +1,31 @@
+#
+# Copyright 2013-2020 Software Radio Systems Limited
+#
+# This file is part of srsLTE
+#
+# srsLTE is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as
+# published by the Free Software Foundation, either version 3 of
+# the License, or (at your option) any later version.
+#
+# srsLTE is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+#
+# A copy of the GNU Affero General Public License can be found in
+# the LICENSE file in the top-level directory of this distribution
+# and at http://www.gnu.org/licenses/.
+#
+
+########################################################################
+# END-TO-END TESTS
+########################################################################
+
+SET(CTEST_OUTPUT_ON_FAILURE TRUE)
+
+if (ZEROMQ_FOUND)
+  foreach (cell_n_prb 6 15 25 50 75 100)
+    add_test(e2e_${cell_n_prb}prb ${CMAKE_CURRENT_SOURCE_DIR}/run_lte.sh ${CMAKE_CURRENT_BINARY_DIR}/../ ${cell_n_prb})
+  endforeach (cell_n_prb)
+endif (ZEROMQ_FOUND)
\ No newline at end of file
diff --git a/test/README.md b/test/README.md
new file mode 100644
index 000000000..452ad6057
--- /dev/null
+++ b/test/README.md
@@ -0,0 +1,51 @@
+End-to-End LTE Tests
+====================
+
+This folder contains a basic shell script that allows a quick end-to-end LTE test
+using srsUE, srsENB, and srsEPC. The script has minimal requirements and should
+only take less then 30 seconds for each configuration. Currently the script
+only allows to configure the cell bandwidth.
+
+The script launches all components and puts the UE into a different network namespace
+in order to allow IP connectivity to srsEPC on a single machine. It therefore
+requires root privelages at the moment.
+
+It then launches, one after another, uplink and downlink ping as well as a quick UDP
+downlink session. Between those experiments, the UE  transits between RRC Idle and Connected
+states multiple times and is either put into Connected through pending UL traffic or
+pending DL traffic (using paging).
+
+After the experiments are finished, all components are torn down and the log files
+are analyzed.
+
+
+Single Execution
+----------------
+
+The script can be executed manually. It expects the srsLTE build directory as
+the first argument and the cell bandwidth as the second.
+
+```
+$ sudo ./run_lte.sh ~/src/srsLTE/build 50
+```
+
+Testing all Bandwidths
+----------------------
+
+You can also test all bandwidths by letting CTest iterate over all possible PRB sizes.
+
+```
+$ cd test
+$ sudo make test
+```
+
+Known Issues
+------------
+
+If you've started the script and it failed it may left the network namespace open and thus
+the next execution of the script will fail. In this case, just delete the network namespace
+before running again:
+
+```
+$ sudo ip netns delete ue1
+```
\ No newline at end of file
diff --git a/test/run_lte.sh b/test/run_lte.sh
new file mode 100755
index 000000000..fcfd75aeb
--- /dev/null
+++ b/test/run_lte.sh
@@ -0,0 +1,277 @@
+#!/bin/bash
+
+#
+# Copyright 2013-2020 Software Radio Systems Limited
+#
+# This file is part of srsLTE
+#
+# srsLTE is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as
+# published by the Free Software Foundation, either version 3 of
+# the License, or (at your option) any later version.
+#
+# srsLTE is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+#
+# A copy of the GNU Affero General Public License can be found in
+# the LICENSE file in the top-level directory of this distribution
+# and at http://www.gnu.org/licenses/.
+#
+
+epc_pid=0
+enb_pid=0
+ue_pid=0
+
+print_use(){
+  echo "Please call script with srsLTE build path as first argument and number of PRBs as second"
+  echo "E.g. ./run_lte.sh [build_path] [nof_prb]"
+  exit -1
+}
+
+kill_lte(){
+  echo "Shutting down LTE network"
+  # Allow to gracefully exit
+  kill -SIGTERM $ue_pid
+  sleep 4
+  kill -SIGTERM $enb_pid
+  sleep 4
+  kill -SIGTERM $epc_pid
+  sleep 1
+  
+  # Force kill if they are still running
+  if ps -p $ue_pid > /dev/null
+  then
+    echo "Killing UE"
+    kill -9 $ue_pid
+  fi
+  if ps -p $enb_pid > /dev/null
+  then
+    echo "Killing eNB"
+    kill -9 $enb_pid
+  fi
+  if ps -p $epc_pid > /dev/null
+  then
+    echo "Killing EPC"
+    kill -9 $epc_pid
+  fi
+  
+  if [ -f ./srsLTE.backtrace.crash ]; then
+    echo "Rename backtrace"
+    mv ./srsLTE.backtrace.crash srsLTE.backtrace.log
+  fi
+
+  # Delete netns
+  ip netns delete $ue_netns
+  
+  # Don't exit with return code ..
+}
+
+valid_num_prb()
+{
+    case "$1" in
+    "6"|"15"|"25"|"50"|"75"|"100")
+        return 0;;
+    *)
+        echo "Invalid number of PRBs. Possible values are [6, 15, 25, 50, 75, 100]."
+        return 1;;
+    esac
+}
+
+
+# check if build path has been passed
+if ([ ! $1 ])
+then
+  print_use
+  exit
+fi
+build_path="$1"
+
+# check number of PRBs
+if ([ ! $2 ])
+then
+  print_use
+  exit
+fi
+nof_prb="$2"
+
+# Check for LTE binaries in build path
+if [ ! -x "$build_path/srsenb/src/srsenb" ]; then
+  echo "Error! srsENB binary not found or not executable!"
+  exit 1
+fi
+
+if [ ! -x "$build_path/srsepc/src/srsepc" ]; then
+  echo "Error! srsEPC binary not found or not executable!"
+  exit 1
+fi
+
+if [ ! -x "$build_path/srsue/src/srsue" ]; then
+  echo "Error! srsUE binary not found or not executable!"
+  exit 1
+fi
+
+# Check PRB parameter
+if ! valid_num_prb "$nof_prb"; then
+  exit 1
+fi
+
+# Adding netns
+ue_netns="ue1"
+ip netns add $ue_netns
+if [ $? -ne 0 ]
+then
+  echo "Couldn't add netns. Missing permissions? Network namespace $ue_netns already exists?"
+  exit 1
+fi
+
+epc_args="$build_path/../srsepc/epc.conf.example --log.filename=./${nof_prb}prb_epc.log"
+enb_args="$build_path/../srsenb/enb.conf.example --rf.device_name=zmq --rf.device_args=\"fail_on_disconnect=true,tx_port=tcp://*:2000,rx_port=tcp://localhost:2001,id=enb,base_srate=23.04e6\" --expert.nof_phy_threads=1 --expert.rrc_inactivity_timer=1000 --enb.n_prb=$nof_prb --log.filename=./${nof_prb}prb_enb.log"
+ue_args="$build_path/../srsue/ue.conf.example --rf.device_name=zmq --rf.device_args=\"tx_port=tcp://*:2001,rx_port=tcp://localhost:2000,id=ue,base_srate=23.04e6\" --phy.nof_phy_threads=1  --gw.netns=$ue_netns --log.filename=./${nof_prb}prb_ue.log"
+
+# Remove existing log files
+log_files=$(ls -l | grep ${nof_prb}prb_)
+if [ ! -z "$log_files" ]; then
+  echo "Deleting existing log files for ${nof_prb} PRB."
+  eval "rm -Rf ${nof_prb}prb_*.log"
+fi
+
+# Run srsEPC 
+echo "Starting srsEPC"
+screen -S srsepc -dm -L -Logfile ./${nof_prb}prb_screenlog_srsepc.log $build_path/srsepc/src/srsepc $epc_args
+sleep 3
+epc_pid=$(pgrep srsepc)
+if [ -z "$epc_pid" ]
+then
+  echo "Couldn't start EPC."
+  kill_lte
+  exit 1
+fi
+echo "srsEPC's PID is $epc_pid"
+
+# Run srsENB
+echo "Starting srsENB"
+screen -S srsenb -dm -L -Logfile ./${nof_prb}prb_screenlog_srsenb.log $build_path/srsenb/src/srsenb $enb_args
+sleep 2
+enb_pid=$(pgrep srsenb)
+if [ -z "$enb_pid" ]
+then
+  echo "Couldn't start ENB"
+  kill_lte
+  exit 1
+fi
+echo "srsENB's PID is $enb_pid"
+
+# Run srsUE
+echo "Starting srsUE"
+screen -S srsue -dm -L -Logfile ${nof_prb}prb_screenlog_srsue.log $build_path/srsue/src/srsue $ue_args
+sleep 2
+ue_pid=$(pgrep srsue)
+if [ -z "$ue_pid" ]
+then
+  echo "Couldn't start UE"
+  kill_lte
+  exit 1
+fi
+echo "srsUE's PID is $ue_pid"
+
+
+# Wait until UE is connected
+timeout=10
+tun_dev="tun_srsue"
+
+echo "Waiting for $tun_dev to become available for ${timeout}s .."
+wait_time=0
+ip=$(ip netns exec $ue_netns ip addr show $tun_dev | grep "inet\b" | awk '{print $2}' | cut -d/ -f1)
+while [ -z $ip ] && [ $wait_time -ne $timeout ]
+do
+  # Wait 1s before next attempt
+  sleep 1
+  let wait_time++
+  ip=$(ip netns exec $ue_netns ip addr show $tun_dev | grep "inet\b" | awk '{print $2}' | cut -d/ -f1)
+done
+
+if [ ! -z $ip ]; then
+  echo "$tun_dev is up with IP $ip!"
+  sleep 1
+else
+  echo "$tun_dev didn't get up after ${timeout}s"
+  kill_lte
+  exit 1
+fi
+
+# extract MME IP
+baseip=`echo $ip | cut -d"." -f1-3`
+mme_ip=$baseip".1"
+
+echo "MME IP is $mme_ip"
+
+# show UE console trace
+screen -S srsue -X stuff "t$(printf \\r)"
+
+# Run tests now
+
+# sleep 3s to get RRC connection release
+sleep 1.5
+
+# run UL ping test
+echo "Run UL ping"
+ip netns exec $ue_netns screen -dm -L -Logfile ./${nof_prb}prb_screenlog_ping_ul.log ping $mme_ip -c 3
+sleep 4
+
+# sleep 3s to get RRC connection release
+echo "Run DL ping"
+screen -dm -L -Logfile ./${nof_prb}prb_screenlog_ping_dl.log ping $ip -c 3
+sleep 4
+
+# run UDP DL
+echo "Run DL iperf"
+screen -dm -L -Logfile ./${nof_prb}prb_screenlog_iperf_dl.log iperf -c $ip -u -t 1 -i 1 -b 100M
+sleep 2
+
+# Stop all running LTE components and remove netns
+kill_lte
+
+# check ping results
+loss_rate=$(cat ./${nof_prb}prb_screenlog_ping_ul.log | grep -oP '\d+(?=% packet loss)')
+if [ "$loss_rate" != "0" ] 2>/dev/null; then
+  echo "Error. Detected $loss_rate per-cent loss rate in UL ping."
+  exit 1
+fi
+
+loss_rate=$(cat ./${nof_prb}prb_screenlog_ping_dl.log | grep -oP '\d+(?=% packet loss)')
+if [ "$loss_rate" != "0" ] 2>/dev/null; then
+  echo "Error. Detected $loss_rate per-cent loss rate in DL ping."
+  exit 1
+fi
+
+# check that all log files have "Closing log" as last line
+last_line=$(cat ./${nof_prb}prb_ue.log | tail -n1)
+if [ "$last_line" != "Closing log" ]; then
+  echo "Error. srsUE didn't seem to have exited properly."
+  exit 1
+fi
+
+last_line=$(cat ./${nof_prb}prb_enb.log | tail -n1)
+if [ "$last_line" != "Closing log" ]; then
+  echo "Error. srsENB didn't seem to have exited properly."
+  exit 1
+fi
+
+last_line=$(cat ./${nof_prb}prb_epc.log | tail -n1)
+if [ "$last_line" != "Closing log" ]; then
+  echo "Error. srsEPC didn't seem to have exited properly."
+  exit 1
+fi
+
+# Check PRACH results
+num_prach=$(cat ./${nof_prb}prb_screenlog_srsenb.log | grep RACH | wc -l)
+if [ "$loss_rate" != "5" ] 2>/dev/null; then
+  echo "Error. Detected $num_prach PRACHs. But should be 5."
+  exit 1
+fi
+
+echo "All tests passed!"
+
+exit 0