fping 5.0 (2020-08-05) ====================== ## Incompatible Changes - In non-quiet loop and count mode, a line is printed for every lost packet (#175, thanks @kbucheli): ``` $ fping -D -c2 8.8.8.8 8.8.8.7 [1596092373.18423] 8.8.8.8 : [0], 64 bytes, 12.8 ms (12.8 avg, 0% loss) [1596092374.18223] 8.8.8.7 : [0], timed out (NaN avg, 100% loss) [1596092374.18424] 8.8.8.8 : [1], 64 bytes, 12.3 ms (12.5 avg, 0% loss) [1596092375.18344] 8.8.8.7 : [1], timed out (NaN avg, 100% loss) 8.8.8.8 : xmt/rcv/%loss = 2/2/0%, min/avg/max = 12.3/12.5/12.8 8.8.8.7 : xmt/rcv/%loss = 2/0/100% ``` - The returned size in bytes now always excludes the IP header, so if before it reported '84 bytes' e.g. when using 'fping -l', now it reports '64 bytes'. This is to make the reported size consistent with ping(8) from iputils and also with fping when pinging a IPv6 host (which never included the IPv6 header size). ## New features - The number of sent pings is only counted when the pings are received or have timed out, ensuring that the loss ratio will be always correct. This makes it possible, for example, to use loop mode (-l) with interval statistics (-Q) and a timeout larger than period, without having the issue that initially some pings would be reported as missing (#193) - Improved precision of measurements from 10us to 1us (#136, thanks @tycho) ## Bugfixes and other changes - The reported size of received packets is now always correct on Linux even for packets > 4096 bytes (#180) - Travis CI automated testing now also macos testing and additional ubuntu distributions (#196) fping 4.4 (2020-07-24) ====================== ## Bugfixes and other changes - Fix wrong ident used for normal (non-unprivileged) pings (#191, thanks @tycho) - Fix build with --disable-ipv6 (#187, thanks Polynomial-C) fping 4.3 (2020-07-11) ====================== ## New features - Linux unprivileged ping support (#173, thanks @tycho) - Add SIGQUIT summary support similar to ping (#185, thanks @laddp) ## Bugfixes and other changes - Corrected long option name of -s to --stats (#148, thanks @wopfel) - Do not fail if using fping6 with -6 flag (#149, thanks @stromnet) - Fail if interface binding (-I) does not work (#162, thanks @kbucheli) - Fix using option -4 when fping is compiled IPv4-only (#154, thanks @pbhenson) - Add Azure pipeline test build (#153 and #170, thanks @gsnw) - GCC 10 compatibility fixes (#167 and #168, thanks @cranderson) - Macos build fix (#174, thanks @tycho) - Fix xmt stats in Netdata output (#172, thanks @vlvkobal) - Only increase num_alive if response is not a duplicate (#151, thanks @brownowski) - Use line buffering for stdout (#179, thanks @bg6cq) fping 4.2 (2019-02-19) ====================== ## New features - New option -x / --reachable to check if the number of reachable hosts is >= a certain number. Useful for example to implement connectivity-checks (#138, thanks @deepak0004) ## Bugfixes and other changes - Allow decimal numbers for '-t', '-i', '-p', and '-Q' - Fix build with --disable-ipv6 (#134, thanks @Polynomial-C) - Fix hang with '-6', with ipv6 kernel module, but not loaded (#140, thanks @abelbeck) - Assume '-6' if the binary is named 'fping6' (this is mostly for special embedded-distro use cases, and not meant to be used generally in place of compiling IPv6-only binary or using '-6', see also the notes in #139, thanks abelbeck) - Get rid of warning "timeout (-t) value larger than period (-p) produces unexpected results" (#142, thanks @MrDragon1122) fping 4.1 (2018-09-17) ====================== ## Bugfixes and other changes - Fix problem when socket fd is 0 (#125, thanks Ramón Novoa!) - Fix running on servers with disabled IPv6 (#118, thanks Simon Matter) - Allow running "fping -h" or "--help" even when raw socket can't be opened (#131, thanks @teto) - Fix build issue with FreeBSD and IPv6 (#132, thanks @gsnw) fping 4.0 (2017-04-23) ====================== ## Incompatible Changes ##### fping and fping6 unification fping and fping6 are now unified into one binary. It means that, for example, doing 'fping google.com' is going to ping the IPv6 IP of google.com on IPv6-enabled hosts. If you need exact compatibility with old versions, you can configure and install fping twice: once for ipv4, and once for ipv6: ./configure --disable-ipv6; make clean install ./configure --disable-ipv4 --program-suffix=6; make clean install ##### Option -n, not the same as -d anymore Option -n / --name is now doing a reverse-DNS lookups on host addresses, only if they are given as IP address, but not for hostnames. For example, if you write 'fping -n google.com', fping would previously do a forward-DNS lookup on google.com, and then a reverse-DNS lookup on the resolved IP address. Now, it is just going to keep the name 'google.com'. That same behavior can be achieved with the option -d / --rdns (which was previously an alias for -n). fping<4.0 fping>=4.0 fping -n NAME NAME->IP->IPNAME NAME fping -d NAME NAME->IP->IPNAME NAME->IP->IPNAME ##### Discarding of late packets fping will now discard replies, if they arrive after the defined timeout for reply packets, specified with -t. This change is relevant only for the count and loop modes, where the measured times should be now more consistent (see github issue [#32][i32] for details). To prevent loosing reply packets because of this change, the default timeout in count and loop modes is now automatically adjusted to the period interval (up to 2000 ms), but it can be overriden with the -t option. The default timeout for non-loop/count modes remains 500 ms. ##### No restrictions by default fping will not enforce -i >= 1 and -p >= 10 anymore, except if you './configure --enable-safe-limits'. The reasoning to removing the restrictions by default, is that users can clog the network with other tools anyway, and these restrictions are sometimes getting in the way (for example if you try to ping a lot of hosts). ##### Default interval (-i) changed from 25ms to 10ms The default minimum interval between ping probes has been changed from 25ms to 10ms. The reason is that 25ms is very high, considering today's fast networks: it generates at most 31 kbps of traffic (for IPv4 and default payload size). ## New features - Unified 'fping' and 'fping6' into one binary ([#80][i80]) - Long option names for all options - IPv6 enabled by default - New option -4 to force IPv4 - New option -6 to force IPv6 - Keep original name if a hostname is given with -n/--name - Option -d/--rdns now always does a rdns-lookup, even for names, as '-n' was doing until now - Enforce -t timeout on reply packets, by discarding late packets ([#32][i32]) - Auto-adjust timeout for -c/-C/-l mode to value of -p ## Bugfixes and other changes - -i/-p restrictions disabled by default (enable with --enable-safe-limits) - Default interval -i changed from 25ms to 10ms - Fix compatibility issue with GNU Hurd - A C99 compiler is now required - Option parsing with optparse (https://github.com/skeeto/optparse). Thanks Christopher Wellons! - New changelog file format [i32]: https://github.com/schweikert/fping/issues/32 [i80]: https://github.com/schweikert/fping/issues/80 (see doc/CHANGELOG.pre-v4 for older changes)