diff --git a/COPYING b/COPYING old mode 100755 new mode 100644 diff --git a/ChangeLog b/ChangeLog old mode 100755 new mode 100644 index 83c4843..5b98892 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,161 @@ +Mon Dec 21 2009 +Tobi Oetiker +- Revision v2.4b2-to3-ipv6 + * added -On option to set the TOS octet + * Removed unused variables from code + * updated to current autoconf standards + * Merged Debian changes (see below) + +---------------------------------------------------------------------- + +fping (2.4b2-to-ipv6-16) unstable; urgency=low + + * Fix the following bugs + - Network byte order sensitivity was missing completely. + Added hopefully all missing calls. + - The sequence numbering scheme used led to packet drops. + Changed it to a more senseful numbering scheme. + - Some minor C programming mistakes ('=' instead of '=='). + Patch by Stephan Fuhrmann; closes: #502569 + * Add support for command line select timeout setting + Patch by Marton Balint; closes: #502575 + * Remove symlinks in /usr/sbin; closes: #377732 + * Standards-Version is 3.8.0 + + -- Anibal Monsalve Salazar Sat, 18 Oct 2008 12:04:52 +1100 + +fping (2.4b2-to-ipv6-15) unstable; urgency=low + + * Added interface binding (-I) for fping + Patch by Peter Naulls + Closes: #439014 + * Fixed a couple of typos in fping.8. Closes: #423180 + * Added homepage control header + * Bumped Standards-Version to 3.7.3 + * Fixed the following lintian issue: + - debian-rules-sets-DH_COMPAT + + -- Anibal Monsalve Salazar Mon, 03 Mar 2008 17:46:17 +1100 + +fping (2.4b2-to-ipv6-13) unstable; urgency=low + + * Fixed stdout flush problem, closes: #340146. + Patch by Bart Martens . + + -- Anibal Monsalve Salazar Fri, 30 Dec 2005 08:30:09 +1100 + +fping (2.4b2-to-ipv6-12) unstable; urgency=low + + * Fixed "problem with option -r (retry limit)", closes: #318402. + Patch by Qingning Huo . + + -- Anibal Monsalve Salazar Sat, 08 Oct 2005 21:26:35 +1000 + +fping (2.4b2-to-ipv6-11) unstable; urgency=low + + * Fixed "would be useful to specify 'source address' like ping for multi + homed machines", closes: #198486. + Patch by Marc Haber . + + -- Anibal Monsalve Salazar Thu, 02 Jun 2005 08:14:54 +1000 + +fping (2.4b2-to-ipv6-10) unstable; urgency=low + + * Fixed "unnecessary delay with the -c option after the last packet" + (Closes: #293856). Patch by Niko Tyni + + -- Anibal Monsalve Salazar Sun, 06 Feb 2005 23:25:57 +1100 + +fping (2.4b2-to-ipv6-9) unstable; urgency=low + + * Fixed "fping6 always does reverse lookup" (Closes: #273647). + Patch by Jeroen Massar and forwarded by Bernhard Schmidt + + -- Anibal Monsalve Salazar Mon, 10 Jan 2005 00:01:32 +1100 + +fping (2.4b2-to-ipv6-7) unstable; urgency=low + + * Build fping in build/ipv[46] instead of build and build-ipv6. + * Made DNS errors non-fatal for IPv6 (closes: #198056). + + -- Herbert Xu Fri, 20 Jun 2003 21:36:30 +1000 + +fping (2.4b2-to-ipv6-6) unstable; urgency=low + + * Do not use incorrect linux.h file (closes: #85468). + + -- Herbert Xu Sat, 17 May 2003 14:13:11 +1000 + +fping (2.4b2-to-ipv6-5) unstable; urgency=low + + * Fixed yet another divide by zero bug (closes: #148445). + + -- Herbert Xu Tue, 4 Jun 2002 12:18:03 +1000 + +fping (2.4b2-to-ipv6-4) unstable; urgency=low + + * Made fping6 setuid (closes: #136386). + * Moved fping back into bin. + * Partially applied IPv6 patch to fix IPv6 checksums (closes: #136479). + + -- Herbert Xu Sun, 7 Apr 2002 20:36:56 +1000 + +fping (2.4b2-to-ipv6-3) unstable; urgency=low + + * Added compatibility symlink for fping (closes: #135203). + + -- Herbert Xu Sat, 23 Feb 2002 08:34:11 +1100 + +fping (2.4b2-to-ipv6-2) unstable; urgency=low + + * Fixed another divide by zero error (closes: #132370). + + -- Herbert Xu Thu, 7 Feb 2002 20:10:48 +1100 + +fping (2.4b2-to-ipv6-1) unstable; urgency=low + + * New upstream release. + * Install fping into sbin as done by upstream. + + -- Herbert Xu Fri, 1 Feb 2002 22:11:59 +1100 + +fping (2.2b2-3) unstable; urgency=low + + * Removed INSTALL file from package (closes: #84050). + * Fixed alignment bug. + + -- Herbert Xu Sat, 10 Feb 2001 19:25:18 +1100 + +fping (2.2b2-2) unstable; urgency=low + + * Made changes for dpkg-statoverride (closes: #83838). + + -- Herbert Xu Sun, 28 Jan 2001 21:53:05 +1100 + +fping (2.2b2-1) unstable; urgency=low + + * New upstream release. + * Fixed typo that prevented -d from working (closes: #83255). + * Drop root privileges after opening the socket (closes: #81589). + * Fixed the options [tip], they were out by a factor of 10 + (Richard Kettlewell, closes: #83742). + + -- Herbert Xu Sun, 28 Jan 2001 00:09:41 +1100 + +fping (2.2b1-2) unstable; urgency=low + + * Fixed typo in control file, spotted by William Ono (closes: #49909). + + -- Herbert Xu Mon, 15 May 2000 12:27:03 +1000 + +fping (2.2b1-1) unstable; urgency=low + + * Initial release. + * Fixed divide by zero error (closes: #29902). + + -- Herbert Xu Sat, 30 Oct 1999 16:36:19 +1000 +--------------------------------------------------------------------------------- + Wed Jan 16 2002 Jeroen Massar - Revision v2.4b2-to-IPv6 @@ -9,304 +167,304 @@ Jeroen Massar - num_unreachable was counted twice when a sendto() generated errors. - See http://unfix.org/projects/ipv6/ -Tue Mar 14 2001 -Jason Ewasiuk -- Revision v2.4b1 - - added -g option for generating IPs from a start to an end value - - two available options, generate IPs from start IP to end IP - or from a passed netmask, such as 192.168.1.0/24 - -Thu Feb 15 2001 -Jason Ewasiuk -- Revision v2.3b1 - - formatting changes to code layout (fping.c) - NOTE: Best viewed with a tab stop of 4 - - merged in changes from Debian c/o Herbert Xu - - - Compilation fix on alphas with glibc - - Alignment issues (note from JE: in wait_for_reply()) - - A typo with the time specified on the command line - (note from JE: bug was using 10 instead of 100) - - Drop privileges after obtaining socket - (note from JE: might be moot, since prog exits if - user is not root) - - touched all files in package to this date - - couple new #ifdefs added for future WIN32 support - (Haven't got to adding this yet, will take a lot of rewriting.) - -Fri Dec 8 10:33:13 2000 Roland Schemers - - * stop using sys_errlist and start using strerror - fixed bug in output of -C - -Wed Jan 8 11:18:37 1997 Roland Schemers - - * Created ChangeLog file. What follows was from the CHANGES file. - -* Revision 2.0 1994/10/31 21:26:23 morgan - - Substantial rewrite, including new features: - - support some traditional ping features: - loop mode - specify size of data packets - specify how many pings to send - show per-response data - interpret ICMPs other than ICMP Echo response - - also - - rewrote main loop completely - make timings in tenths of milliseconds - do exponential backoff on retries - port to more systems - add some debugging stuff - do better checking on whether received ICMP is for us - -* Revision 1.24 1993/12/10 23:11:39 schemers - - commented out seteuid(getuid()) since it isn't needed - -* Revision 1.23 1993/12/10 18:33:41 schemers - - Took out the -f option for non-root users. This can be enabled by - defining ENABLE_F_OPTION before compiling. There is a call to - access before opening the file, but there is a race condition. - Reading from stdin is much safer. - - -* Revision 1.22 1993/11/16 19:49:24 schemers - - Took out setuid(getuid()) and used access() system call to - check for access to the file specified with "-f". - -* Revision 1.21 1993/07/20 18:08:19 schemers - - commented out the test to make sure the ping packet came from the - same IP address as the one we sent to. This could cause problems on - multi-homed hosts. - -* Revision 1.20 1993/02/23 00:16:38 schemers - -fixed syntax error (should have compiled before checking in...) - -* Revision 1.19 1993/02/23 00:15:15 schemers - -turned off printing of "is alive" when -a is specified. - -* Revision 1.18 1992/07/28 15:16:44 schemers - -added a fflush(stdout) call before the summary is sent to stderr, so -everything shows up in the right order. - -* Revision 1.17 1992/07/23 03:29:42 schemers -* Revision 1.16 1992/07/22 19:24:37 schemers - -Fixed declaration of timeval_diff. Didn't notice the problem because -I use 'cc' in stead of gcc under Ultrix. Time to switch? :-) - -Modified file reaing so it would skip blank lines or lines starting -with a '#'. Now you can do something like: - -fping -ad < /etc/hosts - -* Revision 1.15 1992/07/21 17:07:18 schemers - -Put in sanity checks so only root can specify "dangerous" options. -Changed usage to show switchs in alphabetical order. -* Revision 1.14 1992/07/21 16:40:52 schemers -* Revision 1.13 1992/07/17 21:02:17 schemers - -Changed the default timeout to 2500 msec, and retry to 3. This was -due to suggestions from people with slow (WAN) networks. The default -1 sec timeout was too fast. - - -Added '-e' option for showing elapsed (round-trip) times on pakets, and -modified the -s option to include min, max, and average round-trip times, -and over all elapsed time. - -Modified action taken when a error is returned from sendto. The action -taken now considers the host unreachable and prints the hostname -followed by the errno message. The program will not exit and will continue -to try other hosts. - -* Revision 1.12 1992/07/17 16:38:54 schemers -* Revision 1.11 1992/07/17 16:28:38 schemers - - move socket create call so I could do a setuid(getuid()) before the - fopen call is made. Once the socket is created root privs aren't needed - to send stuff out on it. - - moved num_timeout counter. It really was for debug purposes and didn't - make sense to the general public :-) Now it is the number of timeouts - (pings that didn't get received with the time limit). - - -* Revision 1.10 1992/07/16 16:24:38 schemers -* Revision 1.9 1992/07/16 16:00:04 schemers -* Revision 1.8 1992/07/16 05:44:41 schemers - -Added _NO_PROTO stuff for older compilers, and _POSIX_SOURCE -for unistd.h, and _POSIX_SOURCE for stdlib.h. Also added -check for __cplusplus. - -Now compiles ok under Ultrix 3.1, and Sun4 using cc. Also compiled -ok using g++ 2.2.2. - -Changed '-a' and '-u' flags to be mutually exclusive (makes sense, since -specifiying both '-a' and '-u' is the same as not specifiying anything. -Since '-a' and '-u' are mutually exclusive, these options now only print -the hostname, and not the 'is alive' or 'is unreachable' messages. -This makes it much easier to do stuff like: - -#!/usr/local/bin/perl -$hosts_to_backup=`cat /etc/hosts.backup|fping -a`; - -Since you don't have to strip off the 'is alive' messages. - -Changed usage to and stats to print to stderr instead of stdout. - ------------------------------------------------------------------------------ - -RCS header info from original fping.c package (no longer required) - -/* - *************************************************** - * - * Standard RCS Header information (see co(1)) - * - * $Author: schemers $ - * - * $Date: 1997/01/08 20:29:33 $ - * - * $Revision: 2.2 $ - * - * $Locker: $ - * - * $Source: /afs/ir/group/networking/src/fping/fping-2.2/src/RCS/fping.c,v $ - * - * $State: Exp $ - * - * $Log: fping.c,v $ - * - * Revision 2.2 1997/01/08 20:29:33 schemers - * changes for autoconf/automake - * - * Revision 2.1 1997/01/08 19:07:18 schemers - * checked in RL "Bob"'s changes before configure'ing - * - * Revision 2.0 1994/10/31 21:26:23 schemers - * many changes by RL "Bob" Morgan - * add timing data collection, loop mode, per-packet output, etc - * - * Revision 1.24 1993/12/10 23:11:39 schemers - * commented out seteuid(getuid()) since it isn't needed - * - * Revision 1.23 1993/12/10 18:33:41 schemers - * Took out the -f option for non-root users. This can be enabled by - * defining ENABLE_F_OPTION before compiling. There is a call to - * access before opening the file, but there is a race condition. - * Reading from stdin is much safer. - * - * Revision 1.22 1993/11/16 19:49:24 schemers - * Took out setuid(getuid()) and used access() system call to - * check for access to the file specified with "-f". - * - * Revision 1.21 1993/07/20 18:08:19 schemers - * commented out the test to make sure the ping packet came from the - * same IP address as the one we sent to. This could cause problems on - * multi-homed hosts. - * - * Revision 1.20 1993/02/23 00:16:38 schemers - * fixed syntax error (should have compiled before checking in...) - * - * Revision 1.19 1993/02/23 00:15:15 schemers - * turned off printing of "is alive" when -a is specified. - * - * Revision 1.18 1992/07/28 15:16:44 schemers - * added a fflush(stdout) call before the summary is sent to stderr, so - * everything shows up in the right order. - * - * Revision 1.17 1992/07/23 03:29:42 schemers - * fixed declaration of timeval_diff. - * - * Revision 1.16 1992/07/22 19:24:37 schemers - * Modified file reading so it would skip blanks lines or lines starting - * with a '#'. Now you can do something like: - * - * fping -ad < /etc/hosts - * - * Revision 1.15 1992/07/21 17:07:18 schemers - * Put in sanity checks so only root can specify "dangerous" options. - * Changed usage to show switchs in alphabetical order. - * - * Revision 1.14 1992/07/21 16:40:52 schemers - * Now when sendto returns an error, the host is considered unreachable and - * and the error message (from errno) is displayed. - * - * Revision 1.13 1992/07/17 21:02:17 schemers - * changed default timeout to 2500 msec (for WANs), and default try - * to 3. This gives 10 second overall timeout. - * - * Added -e option for showing elapsed (round-trip) time on packets - * - * Modified -s option to inlude to round-trip stats - * - * Added #ifndef DEFAULT_* stuff its easier to change the defaults - * - * Reorganized main loop. - * - * cleaned up timeval stuff. removed set_timeval and timeval_expired - * since they aren't needed anymore. Just use timeval_diff. - * - * Revision 1.12 1992/07/17 16:38:54 schemers - * move socket create call so I could do a setuid(getuid()) before the - * fopen call is made. Once the socket is created root privs aren't needed - * to send stuff out on it. - * - * Revision 1.11 1992/07/17 16:28:38 schemers - * moved num_timeout counter. It really was for debug purposes and didn't - * make sense to the general public :-) Now it is the number of timeouts - * (pings that didn't get received with the time limit). - * - * Revision 1.10 1992/07/16 16:24:38 schemers - * changed usage() to use fprintf(stderr,"..."); - * - * Revision 1.9 1992/07/16 16:00:04 schemers - * Added _NO_PROTO stuff for older compilers, and _POSIX_SOURCE - * for unistd.h, and _POSIX_SOURCE for stdlib.h. Also added - * check for __cplusplus. - * - * Revision 1.8 1992/07/16 05:44:41 schemers - * changed -a and -u to only show hostname in results. This is - * for easier parsing. Also added -v flag - * - * Revision 1.7 1992/07/14 18:45:23 schemers - * initialized last_time in add_host function - * - * Revision 1.6 1992/07/14 18:32:40 schemers - * changed select to use FD_ macros - * - * Revision 1.5 1992/07/14 17:21:22 schemers - * standardized exit status codes - * - * Revision 1.4 1992/06/26 15:25:35 schemers - * changed name from rrping to fping - * - * Revision 1.3 1992/06/24 15:39:32 schemers - * added -d option for unreachable systems - * - * Revision 1.2 1992/06/23 03:01:23 schemers - * misc fixes from R.L. "Bob" Morgan - * - * Revision 1.1 1992/06/19 18:23:52 schemers - * Initial revision - * - *-------------------------------------------------- - * Copyright (c) 1992, 1994, 1997 Board of Trustees - * Leland Stanford Jr. University - *************************************************** - */ - - +Tue Mar 14 2001 +Jason Ewasiuk +- Revision v2.4b1 + - added -g option for generating IPs from a start to an end value + - two available options, generate IPs from start IP to end IP + or from a passed netmask, such as 192.168.1.0/24 + +Thu Feb 15 2001 +Jason Ewasiuk +- Revision v2.3b1 + - formatting changes to code layout (fping.c) + NOTE: Best viewed with a tab stop of 4 + - merged in changes from Debian c/o Herbert Xu + + - Compilation fix on alphas with glibc + - Alignment issues (note from JE: in wait_for_reply()) + - A typo with the time specified on the command line + (note from JE: bug was using 10 instead of 100) + - Drop privileges after obtaining socket + (note from JE: might be moot, since prog exits if + user is not root) + - touched all files in package to this date + - couple new #ifdefs added for future WIN32 support + (Haven't got to adding this yet, will take a lot of rewriting.) + +Fri Dec 8 10:33:13 2000 Roland Schemers + + * stop using sys_errlist and start using strerror + fixed bug in output of -C + +Wed Jan 8 11:18:37 1997 Roland Schemers + + * Created ChangeLog file. What follows was from the CHANGES file. + +* Revision 2.0 1994/10/31 21:26:23 morgan + + Substantial rewrite, including new features: + + support some traditional ping features: + loop mode + specify size of data packets + specify how many pings to send + show per-response data + interpret ICMPs other than ICMP Echo response + + also + + rewrote main loop completely + make timings in tenths of milliseconds + do exponential backoff on retries + port to more systems + add some debugging stuff + do better checking on whether received ICMP is for us + +* Revision 1.24 1993/12/10 23:11:39 schemers + + commented out seteuid(getuid()) since it isn't needed + +* Revision 1.23 1993/12/10 18:33:41 schemers + + Took out the -f option for non-root users. This can be enabled by + defining ENABLE_F_OPTION before compiling. There is a call to + access before opening the file, but there is a race condition. + Reading from stdin is much safer. + + +* Revision 1.22 1993/11/16 19:49:24 schemers + + Took out setuid(getuid()) and used access() system call to + check for access to the file specified with "-f". + +* Revision 1.21 1993/07/20 18:08:19 schemers + + commented out the test to make sure the ping packet came from the + same IP address as the one we sent to. This could cause problems on + multi-homed hosts. + +* Revision 1.20 1993/02/23 00:16:38 schemers + +fixed syntax error (should have compiled before checking in...) + +* Revision 1.19 1993/02/23 00:15:15 schemers + +turned off printing of "is alive" when -a is specified. + +* Revision 1.18 1992/07/28 15:16:44 schemers + +added a fflush(stdout) call before the summary is sent to stderr, so +everything shows up in the right order. + +* Revision 1.17 1992/07/23 03:29:42 schemers +* Revision 1.16 1992/07/22 19:24:37 schemers + +Fixed declaration of timeval_diff. Didn't notice the problem because +I use 'cc' in stead of gcc under Ultrix. Time to switch? :-) + +Modified file reaing so it would skip blank lines or lines starting +with a '#'. Now you can do something like: + +fping -ad < /etc/hosts + +* Revision 1.15 1992/07/21 17:07:18 schemers + +Put in sanity checks so only root can specify "dangerous" options. +Changed usage to show switchs in alphabetical order. +* Revision 1.14 1992/07/21 16:40:52 schemers +* Revision 1.13 1992/07/17 21:02:17 schemers + +Changed the default timeout to 2500 msec, and retry to 3. This was +due to suggestions from people with slow (WAN) networks. The default +1 sec timeout was too fast. + + +Added '-e' option for showing elapsed (round-trip) times on pakets, and +modified the -s option to include min, max, and average round-trip times, +and over all elapsed time. + +Modified action taken when a error is returned from sendto. The action +taken now considers the host unreachable and prints the hostname +followed by the errno message. The program will not exit and will continue +to try other hosts. + +* Revision 1.12 1992/07/17 16:38:54 schemers +* Revision 1.11 1992/07/17 16:28:38 schemers + + move socket create call so I could do a setuid(getuid()) before the + fopen call is made. Once the socket is created root privs aren't needed + to send stuff out on it. + + moved num_timeout counter. It really was for debug purposes and didn't + make sense to the general public :-) Now it is the number of timeouts + (pings that didn't get received with the time limit). + + +* Revision 1.10 1992/07/16 16:24:38 schemers +* Revision 1.9 1992/07/16 16:00:04 schemers +* Revision 1.8 1992/07/16 05:44:41 schemers + +Added _NO_PROTO stuff for older compilers, and _POSIX_SOURCE +for unistd.h, and _POSIX_SOURCE for stdlib.h. Also added +check for __cplusplus. + +Now compiles ok under Ultrix 3.1, and Sun4 using cc. Also compiled +ok using g++ 2.2.2. + +Changed '-a' and '-u' flags to be mutually exclusive (makes sense, since +specifiying both '-a' and '-u' is the same as not specifiying anything. +Since '-a' and '-u' are mutually exclusive, these options now only print +the hostname, and not the 'is alive' or 'is unreachable' messages. +This makes it much easier to do stuff like: + +#!/usr/local/bin/perl +$hosts_to_backup=`cat /etc/hosts.backup|fping -a`; + +Since you don't have to strip off the 'is alive' messages. + +Changed usage to and stats to print to stderr instead of stdout. + +----------------------------------------------------------------------------- + +RCS header info from original fping.c package (no longer required) + +/* + *************************************************** + * + * Standard RCS Header information (see co(1)) + * + * $Author: schemers $ + * + * $Date: 1997/01/08 20:29:33 $ + * + * $Revision: 2.2 $ + * + * $Locker: $ + * + * $Source: /afs/ir/group/networking/src/fping/fping-2.2/src/RCS/fping.c,v $ + * + * $State: Exp $ + * + * $Log: fping.c,v $ + * + * Revision 2.2 1997/01/08 20:29:33 schemers + * changes for autoconf/automake + * + * Revision 2.1 1997/01/08 19:07:18 schemers + * checked in RL "Bob"'s changes before configure'ing + * + * Revision 2.0 1994/10/31 21:26:23 schemers + * many changes by RL "Bob" Morgan + * add timing data collection, loop mode, per-packet output, etc + * + * Revision 1.24 1993/12/10 23:11:39 schemers + * commented out seteuid(getuid()) since it isn't needed + * + * Revision 1.23 1993/12/10 18:33:41 schemers + * Took out the -f option for non-root users. This can be enabled by + * defining ENABLE_F_OPTION before compiling. There is a call to + * access before opening the file, but there is a race condition. + * Reading from stdin is much safer. + * + * Revision 1.22 1993/11/16 19:49:24 schemers + * Took out setuid(getuid()) and used access() system call to + * check for access to the file specified with "-f". + * + * Revision 1.21 1993/07/20 18:08:19 schemers + * commented out the test to make sure the ping packet came from the + * same IP address as the one we sent to. This could cause problems on + * multi-homed hosts. + * + * Revision 1.20 1993/02/23 00:16:38 schemers + * fixed syntax error (should have compiled before checking in...) + * + * Revision 1.19 1993/02/23 00:15:15 schemers + * turned off printing of "is alive" when -a is specified. + * + * Revision 1.18 1992/07/28 15:16:44 schemers + * added a fflush(stdout) call before the summary is sent to stderr, so + * everything shows up in the right order. + * + * Revision 1.17 1992/07/23 03:29:42 schemers + * fixed declaration of timeval_diff. + * + * Revision 1.16 1992/07/22 19:24:37 schemers + * Modified file reading so it would skip blanks lines or lines starting + * with a '#'. Now you can do something like: + * + * fping -ad < /etc/hosts + * + * Revision 1.15 1992/07/21 17:07:18 schemers + * Put in sanity checks so only root can specify "dangerous" options. + * Changed usage to show switchs in alphabetical order. + * + * Revision 1.14 1992/07/21 16:40:52 schemers + * Now when sendto returns an error, the host is considered unreachable and + * and the error message (from errno) is displayed. + * + * Revision 1.13 1992/07/17 21:02:17 schemers + * changed default timeout to 2500 msec (for WANs), and default try + * to 3. This gives 10 second overall timeout. + * + * Added -e option for showing elapsed (round-trip) time on packets + * + * Modified -s option to inlude to round-trip stats + * + * Added #ifndef DEFAULT_* stuff its easier to change the defaults + * + * Reorganized main loop. + * + * cleaned up timeval stuff. removed set_timeval and timeval_expired + * since they aren't needed anymore. Just use timeval_diff. + * + * Revision 1.12 1992/07/17 16:38:54 schemers + * move socket create call so I could do a setuid(getuid()) before the + * fopen call is made. Once the socket is created root privs aren't needed + * to send stuff out on it. + * + * Revision 1.11 1992/07/17 16:28:38 schemers + * moved num_timeout counter. It really was for debug purposes and didn't + * make sense to the general public :-) Now it is the number of timeouts + * (pings that didn't get received with the time limit). + * + * Revision 1.10 1992/07/16 16:24:38 schemers + * changed usage() to use fprintf(stderr,"..."); + * + * Revision 1.9 1992/07/16 16:00:04 schemers + * Added _NO_PROTO stuff for older compilers, and _POSIX_SOURCE + * for unistd.h, and _POSIX_SOURCE for stdlib.h. Also added + * check for __cplusplus. + * + * Revision 1.8 1992/07/16 05:44:41 schemers + * changed -a and -u to only show hostname in results. This is + * for easier parsing. Also added -v flag + * + * Revision 1.7 1992/07/14 18:45:23 schemers + * initialized last_time in add_host function + * + * Revision 1.6 1992/07/14 18:32:40 schemers + * changed select to use FD_ macros + * + * Revision 1.5 1992/07/14 17:21:22 schemers + * standardized exit status codes + * + * Revision 1.4 1992/06/26 15:25:35 schemers + * changed name from rrping to fping + * + * Revision 1.3 1992/06/24 15:39:32 schemers + * added -d option for unreachable systems + * + * Revision 1.2 1992/06/23 03:01:23 schemers + * misc fixes from R.L. "Bob" Morgan + * + * Revision 1.1 1992/06/19 18:23:52 schemers + * Initial revision + * + *-------------------------------------------------- + * Copyright (c) 1992, 1994, 1997 Board of Trustees + * Leland Stanford Jr. University + *************************************************** + */ + + diff --git a/INSTALL b/INSTALL old mode 100755 new mode 100644 diff --git a/Makefile.am b/Makefile.am old mode 100755 new mode 100644 index 1341eda..7b4f953 --- a/Makefile.am +++ b/Makefile.am @@ -1,5 +1,5 @@ sbin_PROGRAMS = fping -fping_SOURCES = fping.c options.h linux.h +fping_SOURCES = fping.c options.h man_MANS = fping.8 AUTOMAKE_OPTIONS=foreign -EXTRA_DIST = $(man_MANS) +EXTRA_DIST = $(man_MANS) autogen.sh diff --git a/Makefile.in b/Makefile.in old mode 100755 new mode 100644 index f6b6716..2eb572d --- a/Makefile.in +++ b/Makefile.in @@ -1,6 +1,9 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated by automake 1.11 from Makefile.am. +# @configure_input@ -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -10,386 +13,690 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. +@SET_MAKE@ -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include - -DESTDIR = - pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ - -top_builddir = . - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -transform = @program_transform_name@ - +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -CC = @CC@ -CPP = @CPP@ -MAKEINFO = @MAKEINFO@ -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ - -sbin_PROGRAMS = fping -fping_SOURCES = fping.c options.h linux.h -man_MANS = fping.8 -AUTOMAKE_OPTIONS = foreign -EXTRA_DIST = $(man_MANS) +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +sbin_PROGRAMS = fping$(EXEEXT) +subdir = . +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure COPYING ChangeLog INSTALL config.guess \ + config.sub depcomp install-sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -PROGRAMS = $(sbin_PROGRAMS) - - -DEFS = @DEFS@ -I. -I$(srcdir) -I. -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -fping_OBJECTS = fping.o +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" +PROGRAMS = $(sbin_PROGRAMS) +am_fping_OBJECTS = fping.$(OBJEXT) +fping_OBJECTS = $(am_fping_OBJECTS) fping_LDADD = $(LDADD) -fping_DEPENDENCIES = -fping_LDFLAGS = -CFLAGS = @CFLAGS@ -COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +SOURCES = $(fping_SOURCES) +DIST_SOURCES = $(fping_SOURCES) +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man8dir = $(mandir)/man8 -MANS = $(man_MANS) - NROFF = nroff -DIST_COMMON = README ./stamp-h.in COPYING ChangeLog INSTALL Makefile.am \ -Makefile.in acconfig.h aclocal.m4 config.h.in configure configure.in \ -install-sh missing mkinstalldirs - - -DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) - -TAR = tar +MANS = $(man_MANS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d "$(distdir)" \ + || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr "$(distdir)"; }; } +DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best -SOURCES = $(fping_SOURCES) -OBJECTS = $(fping_OBJECTS) +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +fping_SOURCES = fping.c options.h +man_MANS = fping.8 +AUTOMAKE_OPTIONS = foreign +EXTRA_DIST = $(man_MANS) autogen.sh +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-am -all: all-redirect .SUFFIXES: -.SUFFIXES: .S .c .o .s -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps Makefile - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): configure.in - cd $(srcdir) && $(ACLOCAL) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) +.SUFFIXES: .c .o .obj +am--refresh: + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) - cd $(srcdir) && $(AUTOCONF) -config.h: stamp-h - @if test ! -f $@; then \ - rm -f stamp-h; \ - $(MAKE) stamp-h; \ - else :; fi -stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES= CONFIG_HEADERS=config.h \ - $(SHELL) ./config.status - @echo timestamp > stamp-h 2> /dev/null -$(srcdir)/config.h.in: $(srcdir)/stamp-h.in +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 @if test ! -f $@; then \ - rm -f $(srcdir)/stamp-h.in; \ - $(MAKE) $(srcdir)/stamp-h.in; \ + rm -f stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi -$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h - cd $(top_srcdir) && $(AUTOHEADER) - @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null - -mostlyclean-hdr: -clean-hdr: +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ distclean-hdr: - -rm -f config.h - -maintainer-clean-hdr: - -mostlyclean-sbinPROGRAMS: - -clean-sbinPROGRAMS: - -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS) - -distclean-sbinPROGRAMS: - -maintainer-clean-sbinPROGRAMS: - + -rm -f config.h stamp-h1 install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(sbindir) - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - if test -f $$p; then \ - echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ - $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ - else :; fi; \ - done + test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) - list='$(sbin_PROGRAMS)'; for p in $$list; do \ - rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ - done - -.c.o: - $(COMPILE) -c $< + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(sbindir)" && rm -f $$files -.s.o: - $(COMPILE) -c $< - -.S.o: - $(COMPILE) -c $< +clean-sbinPROGRAMS: + -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS) +fping$(EXEEXT): $(fping_OBJECTS) $(fping_DEPENDENCIES) + @rm -f fping$(EXEEXT) + $(LINK) $(fping_OBJECTS) $(fping_LDADD) $(LIBS) mostlyclean-compile: - -rm -f *.o core *.core - -clean-compile: + -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c -maintainer-clean-compile: +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fping.Po@am__quote@ -fping: $(fping_OBJECTS) $(fping_DEPENDENCIES) - @rm -f fping - $(LINK) $(fping_LDFLAGS) $(fping_OBJECTS) $(fping_LDADD) $(LIBS) - -install-man8: - $(mkinstalldirs) $(DESTDIR)$(man8dir) - @list='$(man8_MANS)'; \ - l2='$(man_MANS)'; for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ +.c.o: +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` +install-man8: $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)" + @list=''; test -n "$(man8dir)" || exit 0; \ + { for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.8[a-z]*$$/p'; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ + done; } uninstall-man8: - @list='$(man8_MANS)'; \ - l2='$(man_MANS)'; for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \ - rm -f $(DESTDIR)$(man8dir)/$$inst; \ - done -install-man: $(MANS) - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-man8 -uninstall-man: @$(NORMAL_UNINSTALL) - $(MAKE) $(AM_MAKEFLAGS) uninstall-man8 - + @list=''; test -n "$(man8dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.8[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + test -z "$$files" || { \ + echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(man8dir)" && rm -f $$files; } + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - here=`pwd` && cd $(srcdir) \ - && mkid -f$$here/ID $$unique $(LISP) - -TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) - tags=; \ +TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ - || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS) - -mostlyclean-tags: - -clean-tags: + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: - -rm -f TAGS ID + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -maintainer-clean-tags: - -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) +distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically \`make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist - -rm -rf $(distdir) - GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz - mkdir $(distdir)/=build - mkdir $(distdir)/=inst - dc_install_base=`cd $(distdir)/=inst && pwd`; \ - cd $(distdir)/=build \ - && ../configure --srcdir=.. --prefix=$$dc_install_base \ + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) dist - -rm -rf $(distdir) - @banner="$(distdir).tar.gz is ready for distribution"; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes" -dist: distdir - -chmod -R a+r $(distdir) - GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) - -rm -rf $(distdir) -dist-all: distdir - -chmod -R a+r $(distdir) - GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) - -rm -rf $(distdir) -distdir: $(DISTFILES) - -rm -rf $(distdir) - mkdir $(distdir) - -chmod 777 $(distdir) - @for file in $(DISTFILES); do \ - d=$(srcdir); \ - if test -d $$d/$$file; then \ - cp -pr $$d/$$file $(distdir)/$$file; \ - else \ - test -f $(distdir)/$$file \ - || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ - || cp -p $$d/$$file $(distdir)/$$file || :; \ - fi; \ - done -info-am: -info: info-am -dvi-am: -dvi: dvi-am + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @$(am__cd) '$(distuninstallcheck_dir)' \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 check-am: all-am check: check-am -installcheck-am: -installcheck: installcheck-am -all-recursive-am: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -install-exec-am: install-sbinPROGRAMS +all-am: Makefile $(PROGRAMS) $(MANS) config.h +installdirs: + for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am install-exec: install-exec-am - -install-data-am: install-man install-data: install-data-am +uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -install: install-am -uninstall-am: uninstall-sbinPROGRAMS uninstall-man -uninstall: uninstall-am -all-am: Makefile $(PROGRAMS) $(MANS) config.h -all-redirect: all-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install -installdirs: - $(mkinstalldirs) $(DESTDIR)$(sbindir) $(DESTDIR)$(mandir)/man8 - +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -rm -f config.cache config.log stamp-h stamp-h[0-9]* + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: -mostlyclean-am: mostlyclean-hdr mostlyclean-sbinPROGRAMS \ - mostlyclean-compile mostlyclean-tags \ - mostlyclean-generic + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am -mostlyclean: mostlyclean-am +clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am -clean-am: clean-hdr clean-sbinPROGRAMS clean-compile clean-tags \ - clean-generic mostlyclean-am +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-tags -clean: clean-am +dvi: dvi-am -distclean-am: distclean-hdr distclean-sbinPROGRAMS distclean-compile \ - distclean-tags distclean-generic clean-am +dvi-am: -distclean: distclean-am - -rm -f config.status +html: html-am -maintainer-clean-am: maintainer-clean-hdr maintainer-clean-sbinPROGRAMS \ - maintainer-clean-compile maintainer-clean-tags \ - maintainer-clean-generic distclean-am - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." +html-am: + +info: info-am + +info-am: + +install-data-am: install-man + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-sbinPROGRAMS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man8 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: maintainer-clean: maintainer-clean-am - -rm -f config.status - -.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ -mostlyclean-sbinPROGRAMS distclean-sbinPROGRAMS clean-sbinPROGRAMS \ -maintainer-clean-sbinPROGRAMS uninstall-sbinPROGRAMS \ -install-sbinPROGRAMS mostlyclean-compile distclean-compile \ -clean-compile maintainer-clean-compile install-man8 uninstall-man8 \ -install-man uninstall-man tags mostlyclean-tags distclean-tags \ -clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ -check-am installcheck-am installcheck all-recursive-am install-exec-am \ -install-exec install-data-am install-data install-am install \ -uninstall-am uninstall all-redirect all-am all installdirs \ -mostlyclean-generic distclean-generic clean-generic \ -maintainer-clean-generic clean mostlyclean distclean maintainer-clean + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-man uninstall-sbinPROGRAMS + +uninstall-man: uninstall-man8 + +.MAKE: all install-am install-strip + +.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \ + clean-generic clean-sbinPROGRAMS ctags dist dist-all \ + dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-xz \ + dist-zip distcheck distclean distclean-compile \ + distclean-generic distclean-hdr distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am html html-am info \ + info-am install install-am install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-man8 install-pdf install-pdf-am install-ps \ + install-ps-am install-sbinPROGRAMS install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ + uninstall-am uninstall-man uninstall-man8 \ + uninstall-sbinPROGRAMS # Tell versions [3.59,3.63) of GNU make to not export all variables. diff --git a/README b/README old mode 100755 new mode 100644 index 08a7ca6..326fa51 --- a/README +++ b/README @@ -12,7 +12,7 @@ fping website: http://www.fping.com Original author: Roland Schemers (schemers@stanford.edu) Previous maintainer: RL "Bob" Morgan (morgan@stanford.edu) IPv6 Support: Jeroen Massar (jeroen@unfix.org / jeroen@ipng.nl) - + to enable IPV6 compile with -DIPV6 Suggestions and patches: diff --git a/aclocal.m4 b/aclocal.m4 old mode 100755 new mode 100644 index f23ba29..d360465 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,70 +1,831 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 - -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. - -# Do all the work for Automake. This macro actually does too much -- -# some checks are only needed if your package does certain things. -# But this isn't really a big deal. - -# serial 1 - -dnl Usage: -dnl AM_INIT_AUTOMAKE(package,version, [no-define]) - -AC_DEFUN(AM_INIT_AUTOMAKE, -[AC_REQUIRE([AC_PROG_INSTALL]) -PACKAGE=[$1] -AC_SUBST(PACKAGE) -VERSION=[$2] -AC_SUBST(VERSION) -dnl test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +# generated automatically by aclocal 1.11 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],, +[m4_warning([this file was generated for autoconf 2.63. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.11' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.11], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.11])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 9 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 10 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 5 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 16 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.62])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless `enable' is passed literally. +# For symmetry, `disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], +[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 6 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) fi -ifelse([$3],, -AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) -AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) -AC_REQUIRE([AM_SANITY_CHECK]) -AC_REQUIRE([AC_ARG_PROGRAM]) -dnl FIXME This is truly gross. -missing_dir=`cd $ac_aux_dir && pwd` -AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) -AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) -AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) -AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) -AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) -AC_REQUIRE([AC_PROG_MAKE_SET])]) +]) +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # -# Check to make sure that the build environment is sane. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 +# Free Software Foundation, Inc. # +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 -AC_DEFUN(AM_SANITY_CHECK, +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 -echo timestamp > conftestfile +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` - if test "[$]*" = "X"; then + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftestfile` + set X `ls -t "$srcdir/configure" conftest.file` fi - if test "[$]*" != "X $srcdir/configure conftestfile" \ - && test "[$]*" != "X conftestfile $srcdir/configure"; then + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a @@ -74,7 +835,7 @@ if ( alias in your environment]) fi - test "[$]2" = conftestfile + test "$[2]" = conftest.file ) then # Ok. @@ -83,45 +844,148 @@ else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi -rm -f conftest* AC_MSG_RESULT(yes)]) -dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) -dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, -[AC_MSG_CHECKING(for working $2) -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if ($2 --version) < /dev/null > /dev/null 2>&1; then - $1=$2 - AC_MSG_RESULT(found) -else - $1="$3/missing $2" - AC_MSG_RESULT(missing) +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) fi -AC_SUBST($1)]) +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Like AC_CONFIG_HEADER, but automatically create stamp file. - -AC_DEFUN(AM_CONFIG_HEADER, -[AC_PREREQ([2.12]) -AC_CONFIG_HEADER([$1]) -dnl When config.status generates a header, we must update the stamp-h file. -dnl This file resides in the same directory as the config header -dnl that is generated. We must strip everything past the first ":", -dnl and everything past the last "/". -AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl -ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, -<>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, -<>; do - case " <<$>>CONFIG_HEADERS " in - *" <<$>>am_file "*<<)>> - echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx +# Copyright (C) 2006, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false ;; esac - am_indx=`expr "<<$>>am_indx" + 1` -done<<>>dnl>>) -changequote([,]))]) + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR diff --git a/autogen.sh b/autogen.sh new file mode 100755 index 0000000..99882f3 --- /dev/null +++ b/autogen.sh @@ -0,0 +1,4 @@ +#!/bin/sh +PATH="/usr/pack/automake-1.11-to/amd64-linux-debian3.1/:/usr/pack/automake-1.11-to/amd64-linux-ubuntu8.04/bin:$PATH" +export PATH +autoreconf --force --install --verbose diff --git a/config.guess b/config.guess new file mode 100755 index 0000000..da83314 --- /dev/null +++ b/config.guess @@ -0,0 +1,1561 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 +# Free Software Foundation, Inc. + +timestamp='2009-04-27' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[456]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:[3456]*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T | authenticamd | genuineintel) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^LIBC/{ + s: ::g + p + }'`" + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/config.h.in b/config.h.in old mode 100755 new mode 100644 index 712dc0c..3d72756 --- a/config.h.in +++ b/config.h.in @@ -1,32 +1,70 @@ -/* config.h.in. Generated automatically from configure.in by autoheader. */ +/* config.h.in. Generated from configure.in by autoheader. */ + + #ifndef CONFIG_H #define CONFIG_H -/* VERSION (from configure.in) */ -#undef VERSION +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the `nsl' library (-lnsl). */ +#undef HAVE_LIBNSL + +/* Define to 1 if you have the `socket' library (-lsocket). */ +#undef HAVE_LIBSOCKET + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H -/* Define if you have the header file. */ +/* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H -/* Define if you have the header file. */ +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the header file. */ #undef HAVE_SYS_FILE_H -/* Define if you have the header file. */ +/* Define to 1 if you have the header file. */ #undef HAVE_SYS_SELECT_H -/* Define if you have the header file. */ -#undef HAVE_UNISTD_H +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H -/* Define if you have the nsl library (-lnsl). */ -#undef HAVE_LIBNSL +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H -/* Define if you have the socket library (-lsocket). */ -#undef HAVE_LIBSOCKET +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H /* Name of package */ #undef PACKAGE +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + /* Version number of package */ #undef VERSION @@ -38,3 +76,5 @@ #endif #endif /* CONFIG_H */ + + diff --git a/config.sub b/config.sub new file mode 100755 index 0000000..a39437d --- /dev/null +++ b/config.sub @@ -0,0 +1,1686 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 +# Free Software Foundation, Inc. + +timestamp='2009-04-17' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nios | nios2 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/configure b/configure index 31da3b3..d8812bc 100755 --- a/configure +++ b/configure @@ -1,111 +1,759 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by Autoconf 2.50. +# Generated by GNU Autoconf 2.63 for fping 2.4b2_to4-ipv6. # -# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## -# Be Bourne compatible +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } fi +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + # Name of the executable. -as_me=`echo "$0" |sed 's,.*[\\/],,'` +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done -if expr a : '\(a\)' >/dev/null 2>&1; then + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell bug-autoconf@gnu.org about your system, + echo including any error possibly output before this message. + echo This can help us improve future autoconf versions. + echo Configuration will now proceed without shell functions. +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln else as_ln_s='cp -p' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null -as_executable_p="test -f" +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' else - as_unset=false + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' fi +as_executable_p=$as_test_x -# NLS nuisances. -$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; } -$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; } -$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; } -$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; } -$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; } -$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; } -$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; } -$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; } +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" -# CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; } + +exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -exec 6>&1 - # # Initializations. # ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= cross_compiling=no subdirs= -MFLAGS= MAKEFLAGS= +MFLAGS= +MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - -# Avoid depending upon Character Ranges. -ac_cr_az='abcdefghijklmnopqrstuvwxyz' -ac_cr_AZ='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -ac_cr_09='0123456789' -ac_cr_alnum=$ac_cr_az$ac_cr_AZ$ac_cr_09 - -# Sed expression to map a string onto a valid sh and CPP variable names. -ac_tr_sh="sed y%*+%pp%;s%[^_$ac_cr_alnum]%_%g" -ac_tr_cpp="sed y%*$ac_cr_az%P$ac_cr_AZ%;s%[^_$ac_cr_alnum]%_%g" +# Identity of this package. +PACKAGE_NAME='fping' +PACKAGE_TARNAME='fping' +PACKAGE_VERSION='2.4b2_to4-ipv6' +PACKAGE_STRING='fping 2.4b2_to4-ipv6' +PACKAGE_BUGREPORT='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +EGREP +GREP +CPP +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_os +target_vendor +target_cpu +target +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_maintainer_mode +enable_dependency_tracking +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' -ac_unique_file="fping.c" # Initialize some variables set by options. ac_init_help= ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null @@ -128,41 +776,48 @@ x_libraries=NONE # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' +datarootdir='${prefix}/share' +datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -# Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' ac_prev= +ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" + eval $ac_prev=\$ac_option ac_prev= continue fi - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac # Accept the important Cygnus configure options, so we can diagnose typos. - case $ac_option in + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; @@ -184,33 +839,61 @@ do --config-cache | -C) cache_file=config.cache ;; - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) + -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$ac_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$ac_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; esac - eval "enable_$ac_feature='$ac_optarg'" ;; + eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -237,6 +920,12 @@ do -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; @@ -261,13 +950,16 @@ do | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) + | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) @@ -280,7 +972,7 @@ do with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) + | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ @@ -332,6 +1024,16 @@ do | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; @@ -382,26 +1084,38 @@ do ac_init_version=: ;; -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$ac_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; esac - eval "with_$ac_package='$ac_optarg'" ;; + eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$ac_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. @@ -421,7 +1135,7 @@ do | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) { echo "$as_me: error: unrecognized option: $ac_option + -*) { $as_echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; @@ -429,18 +1143,17 @@ Try \`$0 --help' for more information." >&2 *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$ac_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" + eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$ac_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; @@ -449,35 +1162,53 @@ done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 + { $as_echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir \ - exec_prefix prefix +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 + { (exit 1); exit 1; }; } ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir do - eval ac_val=$`echo $ac_var` + eval ac_val=\$$ac_var + # Remove trailing slashes. case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - NONE ) ;; - *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac + { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. +# FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias -# FIXME: should be removed in autoconf 3.0. +# FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes @@ -489,62 +1220,77 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { $as_echo "$as_me: error: working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo "$ac_prog" | sed 's%[\\/][^\\/][^\\/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then + if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2 +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources in $srcdir" >&2 +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 { (exit 1); exit 1; }; } - fi + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. fi -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done # # Report the --help message. @@ -552,8 +1298,8 @@ ac_cv_env_CPP_value=$CPP if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. - cat < if you have libraries in a nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. -EOF +_ACEOF +ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. - ac_popdir=`pwd` - for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue - cd $ac_subdir - # A "../" for each directory in /$ac_subdir. - ac_dots=`echo $ac_subdir | - sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'` - - case $srcdir in - .) # No --srcdir option. We are building in place. - ac_sub_srcdir=$srcdir ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_sub_srcdir=$srcdir/$ac_subdir ;; - *) # Relative path. - ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;; - esac - - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_sub_srcdir/configure.gnu; then - echo - $SHELL $ac_sub_srcdir/configure.gnu --help=recursive - elif test -f $ac_sub_srcdir/configure; then - echo - $SHELL $ac_sub_srcdir/configure --help=recursive - elif test -f $ac_sub_srcdir/configure.ac || - test -f $ac_sub_srcdir/configure.in; then - echo - $ac_configure --help + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive else - echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2 - fi - cd $ac_popdir + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } done fi -test -n "$ac_init_help" && exit 0 +test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then - cat <<\EOF + cat <<\_ACEOF +fping configure 2.4b2_to4-ipv6 +generated by GNU Autoconf 2.63 -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. -EOF - exit 0 +_ACEOF + exit fi -exec 5>config.log -cat >&5 <config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by $as_me, which was -generated by GNU Autoconf 2.50. Invocation command line was +It was created by fping $as_me 2.4b2_to4-ipv6, which was +generated by GNU Autoconf 2.63. Invocation command line was $ $0 $@ -EOF +_ACEOF +exec 5>>config.log { cat <<_ASUNAME -## ---------- ## -## Platform. ## -## ---------- ## +## --------- ## +## Platform. ## +## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` @@ -708,110 +1497,237 @@ uname -v = `(uname -v) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -PATH = $PATH - _ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" +done +IFS=$as_save_IFS + } >&5 -cat >&5 <&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF -EOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= -ac_sep= -for ac_arg +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 do - case $ac_arg in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - ac_sep=" " ;; - *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg" - ac_sep=" " ;; - esac - # Get rid of the leading space. + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. - echo >&5 - echo "## ----------------- ##" >&5 - echo "## Cache variables. ##" >&5 - echo "## ----------------- ##" >&5 - echo >&5 - # The following way of writing the cache mishandles newlines in values, -{ + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$ac_cr_alnum]*_cv_[_$ac_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( *) - sed -n \ - "s/^\\([_$ac_cr_alnum]*_cv_[_$ac_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} >&5 - sed "/^$/d" confdefs.h >conftest.log - if test -s conftest.log; then - echo >&5 - echo "## ------------ ##" >&5 - echo "## confdefs.h. ##" >&5 - echo "## ------------ ##" >&5 - echo >&5 - cat conftest.log >&5 - fi - (echo; echo) >&5 - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" >&5 - echo "$as_me: exit $exit_status" >&5 - rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files && + esac | + sort +) + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------------- ## +## File substitutions. ## +## ------------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status - ' 0 +' 0 for ac_signal in 1 2 13 15; do - trap 'ac_status=$?; ac_signal='$ac_signal'; { (exit $ac_status); exit $ac_status; }' $ac_signal + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h +rm -f -r conftest* confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + # Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + ac_site_file1=$CONFIG_SITE +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site fi -for ac_site_file in $CONFIG_SITE; do +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue if test -r "$ac_site_file"; then - { echo "$as_me:812: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - cat "$ac_site_file" >&5 + { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done @@ -820,108 +1736,269 @@ if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then - { echo "$as_me:823: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} + { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; esac fi else - { echo "$as_me:831: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} + { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. -ac_suggest_removing_cache=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { echo "$as_me:847: WARNING: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: WARNING: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_suggest_removing_cache=: ;; + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; ,set) - { echo "$as_me:851: WARNING: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: WARNING: \`$ac_var' was not set in the previous run" >&2;} - ac_suggest_removing_cache=: ;; + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:857: WARNING: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: WARNING: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:859: WARNING: former value: $ac_old_val" >&5 -echo "$as_me: WARNING: former value: $ac_old_val" >&2;} - { echo "$as_me:861: WARNING: current value: $ac_new_val" >&5 -echo "$as_me: WARNING: current value: $ac_new_val" >&2;} - ac_suggest_removing_cache=: + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi done -if $ac_suggest_removing_cache; then - { echo "$as_me:868: WARNING: changes in the environment can compromise the build" >&5 -echo "$as_me: WARNING: changes in the environment can compromise the build" >&2;} - { echo "$as_me:870: WARNING: consider removing $cache_file and starting over" >&5 -echo "$as_me: WARNING: consider removing $cache_file and starting over" >&2;} +if $ac_cache_corrupted; then + { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } fi + + + + + + + + + + + + + + + + + + + + + + + + ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac -echo "#! $SHELL" >conftest.sh -echo "exit 0" >>conftest.sh -chmod +x conftest.sh -if { (echo "$as_me:889: PATH=\".;.\"; conftest.sh") >&5 - (PATH=".;."; conftest.sh) 2>&5 - ac_status=$? - echo "$as_me:892: \$? = $ac_status" >&5 - (exit $ac_status); }; then - ac_path_separator=';' -else - ac_path_separator=: -fi -PATH_SEPARATOR="$ac_path_separator" -rm -f conftest.sh + ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break - elif test -f $ac_dir/install.sh; then + elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break - elif test -f $ac_dir/shtool; then + elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then - { { echo "$as_me:918: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 -echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if test "${ac_cv_build+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +$as_echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if test "${ac_cv_host+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +$as_echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:$LINENO: checking target system type" >&5 +$as_echo_n "checking target system type... " >&6; } +if test "${ac_cv_target+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "x$target_alias" = x; then + ac_cv_target=$ac_cv_host +else + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} { (exit 1); exit 1; }; } fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +$as_echo "$ac_cv_target" >&6; } +case $ac_cv_target in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 +$as_echo "$as_me: error: invalid value of canonical target" >&2;} + { (exit 1); exit 1; }; };; +esac +target=$ac_cv_target +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_target +shift +target_cpu=$1 +target_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +target_os=$* +IFS=$ac_save_IFS +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- +am__api_version='1.11' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or @@ -934,58 +2011,79 @@ ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:938: checking for a BSD compatible install" >&5 -echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6 +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_save_IFS=$IFS; IFS=$ac_path_separator - for ac_dir in $PATH; do - IFS=$ac_save_IFS - # Account for people who put trailing slashes in PATH elements. - case $ac_dir/ in - / | ./ | .// | /cC/* \ - | /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \ - | /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if $as_executable_p "$ac_dir/$ac_prog"; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && - grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && - grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi fi fi done - ;; - esac - done + done + ;; +esac + +done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi -echo "$as_me:987: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. @@ -995,383 +2093,597 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -echo "$as_me:998: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 -echo timestamp > conftestfile +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5 +$as_echo "$as_me: error: unsafe absolute working directory name" >&2;} + { (exit 1); exit 1; }; };; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5 +$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;} + { (exit 1); exit 1; }; };; +esac + # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftestfile` + set X `ls -t "$srcdir/configure" conftest.file` fi - if test "$*" != "X $srcdir/configure conftestfile" \ - && test "$*" != "X conftestfile $srcdir/configure"; then + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". - { { echo "$as_me:1021: error: ls -t appears to fail. Make sure there is not a broken + { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 -echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi - test "$2" = conftestfile + test "$2" = conftest.file ) then # Ok. : else - { { echo "$as_me:1034: error: newly created file is older than distributed files! + { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 -echo "$as_me: error: newly created file is older than distributed files! +$as_echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi -rm -f conftest* -echo "$as_me:1041: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -if test "$program_transform_name" = s,x,x,; then - program_transform_name= -else - # Double any \ or $. echo might interpret backslashes. - cat <<\EOF >conftest.sed -s,\\,\\\\,g; s,\$,$$,g -EOF - program_transform_name=`echo $program_transform_name | sed -f conftest.sed` - rm -f conftest.sed -fi +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } test "$program_prefix" != NONE && - program_transform_name="s,^,${program_prefix},;$program_transform_name" + program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && - program_transform_name="s,\$\$,${program_suffix},;$program_transform_name" - -# sed with no file args requires a program. -test -z "$program_transform_name" && program_transform_name="s,x,x," - -echo "$as_me:1062: checking whether ${MAKE-make} sets \${MAKE}" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftest.make + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:1082: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - SET_MAKE= +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " else - echo "$as_me:1086: result: no" >&5 -echo "${ECHO_T}no" >&6 - SET_MAKE="MAKE=${MAKE-make}" + am_missing_run= + { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi -PACKAGE=fping - -VERSION=2.4b2_to - -if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then - { { echo "$as_me:1096: error: source directory already configured; run \"make distclean\" there first" >&5 -echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } -fi - -cat >>confdefs.h <>confdefs.h <&5 -echo $ECHO_N "checking for working aclocal... $ECHO_C" >&6 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (aclocal --version) < /dev/null > /dev/null 2>&1; then - ACLOCAL=aclocal - echo "$as_me:1117: result: found" >&5 -echo "${ECHO_T}found" >&6 -else - ACLOCAL="$missing_dir/missing aclocal" - echo "$as_me:1121: result: missing" >&5 -echo "${ECHO_T}missing" >&6 -fi - -echo "$as_me:1125: checking for working autoconf" >&5 -echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (autoconf --version) < /dev/null > /dev/null 2>&1; then - AUTOCONF=autoconf - echo "$as_me:1132: result: found" >&5 -echo "${ECHO_T}found" >&6 -else - AUTOCONF="$missing_dir/missing autoconf" - echo "$as_me:1136: result: missing" >&5 -echo "${ECHO_T}missing" >&6 -fi - -echo "$as_me:1140: checking for working automake" >&5 -echo $ECHO_N "checking for working automake... $ECHO_C" >&6 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (automake --version) < /dev/null > /dev/null 2>&1; then - AUTOMAKE=automake - echo "$as_me:1147: result: found" >&5 -echo "${ECHO_T}found" >&6 -else - AUTOMAKE="$missing_dir/missing automake" - echo "$as_me:1151: result: missing" >&5 -echo "${ECHO_T}missing" >&6 -fi - -echo "$as_me:1155: checking for working autoheader" >&5 -echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (autoheader --version) < /dev/null > /dev/null 2>&1; then - AUTOHEADER=autoheader - echo "$as_me:1162: result: found" >&5 -echo "${ECHO_T}found" >&6 -else - AUTOHEADER="$missing_dir/missing autoheader" - echo "$as_me:1166: result: missing" >&5 -echo "${ECHO_T}missing" >&6 -fi - -echo "$as_me:1170: checking for working makeinfo" >&5 -echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (makeinfo --version) < /dev/null > /dev/null 2>&1; then - MAKEINFO=makeinfo - echo "$as_me:1177: result: found" >&5 -echo "${ECHO_T}found" >&6 -else - MAKEINFO="$missing_dir/missing makeinfo" - echo "$as_me:1181: result: missing" >&5 -echo "${ECHO_T}missing" >&6 +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac fi -ac_config_headers="$ac_config_headers config.h" - -ac_config_commands="$ac_config_commands default-1" - -#VERSION=2.4b2 -#PACKAGE=fping - -cat >>confdefs.h <&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_CC="${ac_tool_prefix}gcc" -echo "$as_me:1219: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done +done +IFS=$as_save_IFS fi fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:1227: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } else - echo "$as_me:1230: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi + fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:1239: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_ac_ct_CC="gcc" -echo "$as_me:1254: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done +IFS=$as_save_IFS fi fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:1262: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } else - echo "$as_me:1265: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi - CC=$ac_ct_CC + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi else - CC="$ac_cv_prog_CC" + STRIP="$ac_cv_prog_STRIP" fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:1278: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then + $as_echo_n "(cached) " >&6 else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_CC="${ac_tool_prefix}cc" -echo "$as_me:1293: found $ac_dir/$ac_word" >&5 -break + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done done +IFS=$as_save_IFS -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:1301: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:1304: result: no" >&5 -echo "${ECHO_T}no" >&6 fi + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version + MKDIR_P="$ac_install_sh -d" + fi fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:1313: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AWK+set}" = set; then + $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_ac_ct_CC="cc" -echo "$as_me:1328: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done +IFS=$as_save_IFS fi fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:1336: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:$LINENO: result: $AWK" >&5 +$as_echo "$AWK" >&6; } else - echo "$as_me:1339: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='fping' + VERSION='2.4b2_to4-ipv6' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + + +{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + +ac_config_headers="$ac_config_headers config.h" + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi + + fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:1352: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue -fi -ac_cv_prog_CC="cc" -echo "$as_me:1372: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done +IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. @@ -1382,113 +2694,178 @@ if test $ac_prog_rejected = yes; then # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift - set dummy "$ac_dir/$ac_word" ${1+"$@"} - shift - ac_cv_prog_CC="$@" + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:1394: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:1397: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:1408: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_CC="$ac_tool_prefix$ac_prog" -echo "$as_me:1423: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done +done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:1431: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:1434: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:1447: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_ac_ct_CC="$ac_prog" -echo "$as_me:1462: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done +done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:1470: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - echo "$as_me:1473: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$ac_ct_CC" && break done - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi fi fi -test -z "$CC" && { { echo "$as_me:1485: error: no acceptable cc found in \$PATH" >&5 -echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} - { (exit 1); exit 1; }; } + +test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } + +# Provide some information about the compiler. +$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF -#line 1490 "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ int main () @@ -1499,121 +2876,192 @@ main () } _ACEOF ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe" +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compiler, and finding out an intuition +# It will help us diagnose broken compilers, and finding out an intuition # of exeext. -echo "$as_me:1506: checking for C compiler default output" >&5 -echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:1509: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 +{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { (ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link_default") 2>&5 ac_status=$? - echo "$as_me:1512: \$? = $ac_status" >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - for ac_file in `ls a.exe conftest.exe a.* conftest conftest.* 2>/dev/null`; do + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; - a.out ) # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; - * ) break;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; esac done +test "$ac_cv_exeext" = no && ac_cv_exeext= + else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:1529: error: C compiler cannot create executables" >&5 -echo "$as_me: error: C compiler cannot create executables" >&2;} - { (exit 77); exit 77; }; } + ac_file='' +fi + +{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +if test -z "$ac_file"; then + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } fi ac_exeext=$ac_cv_exeext -echo "$as_me:1535: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 -# Check the compiler produces executables we can run. If not, either +# Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. -echo "$as_me:1540: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' - { (eval echo "$as_me:1546: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 ac_status=$? - echo "$as_me:1549: \$? = $ac_status" >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else - { { echo "$as_me:1556: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'." >&2;} - { (exit 1); exit 1; }; } + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi fi fi -echo "$as_me:1564: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } -rm -f a.out a.exe conftest$ac_cv_exeext +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either +# Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. -echo "$as_me:1571: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:1573: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:1576: checking for executable suffix" >&5 -echo $ECHO_N "checking for executable suffix... $ECHO_C" >&6 -if { (eval echo "$as_me:1578: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 ac_status=$? - echo "$as_me:1581: \$? = $ac_status" >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. -for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; + break;; * ) break;; esac done else - { { echo "$as_me:1597: error: cannot compute EXEEXT: cannot compile and link" >&5 -echo "$as_me: error: cannot compute EXEEXT: cannot compile and link" >&2;} - { (exit 1); exit 1; }; } + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi rm -f conftest$ac_cv_exeext -echo "$as_me:1603: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -echo "$as_me:1609: checking for object suffix" >&5 -echo $ECHO_N "checking for object suffix... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF -#line 1615 "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ int main () @@ -1624,40 +3072,55 @@ main () } _ACEOF rm -f conftest.o conftest.obj -if { (eval echo "$as_me:1627: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>&5 ac_status=$? - echo "$as_me:1630: \$? = $ac_status" >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:1642: error: cannot compute OBJEXT: cannot compile" >&5 -echo "$as_me: error: cannot compute OBJEXT: cannot compile" >&2;} - { (exit 1); exit 1; }; } + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -echo "$as_me:1649: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -echo "$as_me:1653: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF -#line 1659 "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ int main () @@ -1671,41 +3134,59 @@ main () } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:1674: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:1677: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:1680: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? - echo "$as_me:1683: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_compiler_gnu=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no fi -rm -f conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -echo "$as_me:1695: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` +{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:1701: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -#line 1707 "configure" -#include "confdefs.h" + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ int main () @@ -1716,248 +3197,560 @@ main () } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:1719: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:1722: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:1725: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? - echo "$as_me:1728: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_prog_cc_g=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:1738: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:1765: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:1768: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:1771: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:1774: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - ''\ - '#include ' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -#line 1786 "configure" -#include "confdefs.h" -#include -$ac_declaration +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + int main () { -exit (42); + ; return 0; } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:1799: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:1802: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:1805: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? - echo "$as_me:1808: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -continue -fi -rm -f conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -#line 1818 "configure" -#include "confdefs.h" -$ac_declaration + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + int main () { -exit (42); + ; return 0; } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:1830: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:1833: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:1836: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? - echo "$as_me:1839: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi -rm -f conftest.$ac_objext conftest.$ac_ext -done -echo '#ifdef __cplusplus' >>confdefs.h -echo $ac_declaration >>confdefs.h -echo '#endif' >>confdefs.h +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi -rm -f conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:$LINENO: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:$LINENO: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac + + ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:1868: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do - # break 2 since there is a loop in there. ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF -#line 1890 "configure" -#include "confdefs.h" -#include - Syntax error +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error _ACEOF -if { (eval echo "$as_me:1895: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:1901: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi + rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF -#line 1924 "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:1928: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:1934: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break fi + rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then - break 2 + break fi done @@ -1968,80 +3761,96 @@ fi else ac_cv_prog_CPP=$CPP fi -echo "$as_me:1971: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 +{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 +$as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF -#line 1981 "configure" -#include "confdefs.h" -#include - Syntax error +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error _ACEOF -if { (eval echo "$as_me:1986: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:1992: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi + rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF -#line 2015 "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:2019: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:2025: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break fi + rm -f conftest.err conftest.$ac_ext done @@ -2050,9 +3859,13 @@ rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else - { { echo "$as_me:2053: error: C preprocessor \"$CPP\" fails sanity check" >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} - { (exit 1); exit 1; }; } + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi ac_ext=c @@ -2072,58 +3885,79 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:2076: checking for a BSD compatible install" >&5 -echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6 +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_save_IFS=$IFS; IFS=$ac_path_separator - for ac_dir in $PATH; do - IFS=$ac_save_IFS - # Account for people who put trailing slashes in PATH elements. - case $ac_dir/ in - / | ./ | .// | /cC/* \ - | /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \ - | /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if $as_executable_p "$ac_dir/$ac_prog"; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && - grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && - grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi fi fi done - ;; - esac - done + done + ;; +esac + +done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi -echo "$as_me:2125: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. @@ -2133,240 +3967,329 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -echo "$as_me:2136: checking for gethostbyname" >&5 -echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 + + + +{ $as_echo "$as_me:$LINENO: checking for gethostbyname" >&5 +$as_echo_n "checking for gethostbyname... " >&6; } if test "${ac_cv_func_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF -#line 2142 "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. + For example, HP-UX 11i declares gettimeofday. */ +#define gethostbyname innocuous_gethostbyname + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char gethostbyname (); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ + which can conflict with char gethostbyname (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef gethostbyname + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char gethostbyname (); -char (*f) (); - -int -main () -{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) +#if defined __stub_gethostbyname || defined __stub___gethostbyname choke me -#else -f = gethostbyname; #endif +int +main () +{ +return gethostbyname (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:2173: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:2176: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:2179: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? - echo "$as_me:2182: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_func_gethostbyname=yes else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_func_gethostbyname=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_gethostbyname=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:2192: result: $ac_cv_func_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +$as_echo "$ac_cv_func_gethostbyname" >&6; } if test $ac_cv_func_gethostbyname = no; then -echo "$as_me:2197: checking for gethostbyname in -lnsl" >&5 -echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +$as_echo_n "checking for gethostbyname in -lnsl... " >&6; } if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lnsl $LIBS" cat >conftest.$ac_ext <<_ACEOF -#line 2205 "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char gethostbyname (); int main () { -gethostbyname (); +return gethostbyname (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:2224: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:2227: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:2230: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? - echo "$as_me:2233: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_nsl_gethostbyname=yes else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_nsl_gethostbyname=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_nsl_gethostbyname=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:2244: result: $ac_cv_lib_nsl_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 -if test $ac_cv_lib_nsl_gethostbyname = yes; then - cat >>confdefs.h <&5 +$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; } +if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then + cat >>confdefs.h <<_ACEOF #define HAVE_LIBNSL 1 -EOF +_ACEOF LIBS="-lnsl $LIBS" fi fi -echo "$as_me:2256: checking for connect" >&5 -echo $ECHO_N "checking for connect... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking for connect" >&5 +$as_echo_n "checking for connect... " >&6; } if test "${ac_cv_func_connect+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF -#line 2262 "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define connect to an innocuous variant, in case declares connect. + For example, HP-UX 11i declares gettimeofday. */ +#define connect innocuous_connect + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char connect (); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ + which can conflict with char connect (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef connect + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char connect (); -char (*f) (); - -int -main () -{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_connect) || defined (__stub___connect) +#if defined __stub_connect || defined __stub___connect choke me -#else -f = connect; #endif +int +main () +{ +return connect (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:2293: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:2296: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:2299: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? - echo "$as_me:2302: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_func_connect=yes else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_func_connect=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_connect=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:2312: result: $ac_cv_func_connect" >&5 -echo "${ECHO_T}$ac_cv_func_connect" >&6 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +$as_echo "$ac_cv_func_connect" >&6; } if test $ac_cv_func_connect = no; then -echo "$as_me:2317: checking for connect in -lsocket" >&5 -echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6 +{ $as_echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 +$as_echo_n "checking for connect in -lsocket... " >&6; } if test "${ac_cv_lib_socket_connect+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsocket $LIBS" cat >conftest.$ac_ext <<_ACEOF -#line 2325 "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char connect (); int main () { -connect (); +return connect (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:2344: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:2347: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:2350: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? - echo "$as_me:2353: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_socket_connect=yes else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_socket_connect=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_socket_connect=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:2364: result: $ac_cv_lib_socket_connect" >&5 -echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6 -if test $ac_cv_lib_socket_connect = yes; then - cat >>confdefs.h <&5 +$as_echo "$ac_cv_lib_socket_connect" >&6; } +if test "x$ac_cv_lib_socket_connect" = x""yes; then + cat >>confdefs.h <<_ACEOF #define HAVE_LIBSOCKET 1 -EOF +_ACEOF LIBS="-lsocket $LIBS" @@ -2374,66 +4297,561 @@ fi fi -for ac_header in unistd.h sys/file.h stdlib.h sys/select.h -do -ac_ac_Header=`echo "ac_cv_header_$ac_header" | $ac_tr_sh` -echo "$as_me:2380: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$ac_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + + + + + + + +{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if test "${ac_cv_path_GREP+set}" = set; then + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -#line 2386 "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:2390: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:2396: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } fi else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - eval "$ac_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - eval "$ac_ac_Header=no" -fi -rm -f conftest.err conftest.$ac_ext + ac_cv_path_GREP=$GREP fi -echo "$as_me:2415: result: `eval echo '${'$ac_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$ac_ac_Header'}'`" >&6 -if test `eval echo '${'$ac_ac_Header'}'` = yes; then - cat >>confdefs.h <&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" -ac_config_files="$ac_config_files Makefile" -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. + +{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + + + +for ac_header in unistd.h sys/file.h stdlib.h sys/select.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +$as_echo_n "checking $ac_header usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +$as_echo_n "checking $ac_header presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + + ;; +esac +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + +fi +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. # -# `ac_cv_env_foo' variables (set or unset) will be overriden when +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. @@ -2441,39 +4859,59 @@ _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. +# So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -{ +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$ac_cr_alnum]*_cv_[_$ac_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$ac_cr_alnum]*_cv_[_$ac_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} | + esac | + sort +) | sed ' + /^ac_cv_env_/b end t clear - : clear + :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if cmp -s $cache_file confcache; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else - echo "not updating unwritable cache $cache_file" + { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache @@ -2482,141 +4920,422 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= fi -DEFS=-DHAVE_CONFIG_H +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi : ${CONFIG_STATUS=./config.status} +ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:2505: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF +{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 #! $SHELL -# Generated automatically by configure. +# Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. -debug=false -SHELL=\${CONFIG_SHELL-$SHELL} -ac_cs_invocation="\$0 \$@" +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } -_ACEOF + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} -cat >>$CONFIG_STATUS <<\_ACEOF -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -# Name of the executable. -as_me=`echo "$0" |sed 's,.*[\\/],,'` +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -if expr a : '\(a\)' >/dev/null 2>&1; then +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln else as_ln_s='cp -p' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null -as_executable_p="test -f" +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' else - as_unset=false + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' fi +as_executable_p=$as_test_x -# NLS nuisances. -$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; } -$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; } -$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; } -$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; } -$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; } -$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; } -$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; } -$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; } +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; } exec 6>&1 +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by fping $as_me 2.4b2_to4-ipv6, which was +generated by GNU Autoconf 2.63. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + _ACEOF -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" -cat >>$CONFIG_STATUS <<\EOF +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. -Usage: $0 [OPTIONS] [FILE]... +Usage: $0 [OPTION]... [FILE]... -h, --help print this help, then exit - -V, --version print version number, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet, --silent + do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] + --file=FILE[:TEMPLATE] instantiate the configuration file FILE - --header=FILE[:TEMPLATE] + --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: @@ -2629,106 +5348,144 @@ Configuration commands: $config_commands Report bugs to ." -EOF -cat >>$CONFIG_STATUS <>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_version="\\ -config.status -configured by $0, generated by GNU Autoconf 2.50, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" +fping config.status 2.4b2_to4-ipv6 +configured by $0, generated by GNU Autoconf 2.63, + with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. +Copyright (C) 2008 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" -EOF -cat >>$CONFIG_STATUS <<\EOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - shift - set dummy "$ac_option" "$ac_optarg" ${1+"$@"} - shift + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift ;; - -*);; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_need_defaults=false;; esac - case $1 in + case $ac_option in # Handling of the options. -EOF -cat >>$CONFIG_STATUS <>$CONFIG_STATUS <<\EOF - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:2681: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) - shift - CONFIG_FILES="$CONFIG_FILES $1" + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) - shift - CONFIG_HEADERS="$CONFIG_HEADERS $1" + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" ac_need_defaults=false;; - - # Handling of arguments. - 'Makefile' ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - 'default-1' ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; - 'config.h' ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + --he | --h) + # Conflict between --help and --header + { $as_echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; # This is an error. - -*) { { echo "$as_me:2705: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} + -*) { $as_echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; - *) { { echo "$as_me:2710: error: invalid argument: $1" >&5 -echo "$as_me: error: invalid argument: $1" >&2;} - { (exit 1); exit 1; }; };; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + esac shift done -exec 5>>config.log -cat >&5 << _ACEOF +ac_configure_extra_args= -## ----------------------- ## -## Running config.status. ## -## ----------------------- ## +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi -This file was extended by $as_me 2.50, executed with - > $ac_cs_invocation -on `(hostname || uname -n) 2>/dev/null | sed 1q` +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF -EOF -cat >>$CONFIG_STATUS <<\EOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + + # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely @@ -2739,505 +5496,793 @@ if $ac_need_defaults; then test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi -# Create a temporary directory, and hook for its removal unless debugging. +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. $debug || { - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit $?); exit $?; }' 1 2 13 15 + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 } - # Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} + { - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { - tmp=$TMPDIR/cs$$-$RANDOM - (umask 077 && mkdir $tmp) + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") } || { - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 + $as_echo "$as_me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } -EOF +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then -cat >>$CONFIG_STATUS </dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi -cat >>$CONFIG_STATUS <"$tmp/subs1.awk" && +_ACEOF -# -# CONFIG_FILES section. -# -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@DEFS@,$DEFS,;t t -s,@LIBS@,$LIBS,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@PACKAGE@,$PACKAGE,;t t -s,@VERSION@,$VERSION,;t t -s,@ACLOCAL@,$ACLOCAL,;t t -s,@AUTOCONF@,$AUTOCONF,;t t -s,@AUTOMAKE@,$AUTOMAKE,;t t -s,@AUTOHEADER@,$AUTOHEADER,;t t -s,@MAKEINFO@,$MAKEINFO,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@CPP@,$CPP,;t t -CEOF - -EOF - - cat >>$CONFIG_STATUS <<\EOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } +ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\).*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\).*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +$as_echo "$as_me: error: could not setup config files machinery" >&2;} + { (exit 1); exit 1; }; } +_ACEOF + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" -EOF -cat >>$CONFIG_STATUS <<\EOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - { case "$ac_dir" in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy="$ac_dir" -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || mkdir "$as_incr_dir" - ;; - esac -done; } +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. - ac_dir_suffix="/`echo $ac_dir|sed 's,^\./,,'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo "$ac_dir_suffix" | sed 's,/[^/]*,../,g'` +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_t=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_t"; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} + { (exit 1); exit 1; }; } else - ac_dir_suffix= ac_dots= + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi +done - case $srcdir in - .) ac_srcdir=. - if test -z "$ac_dots"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_dots | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_dots$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_dots$srcdir ;; +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +$as_echo "$as_me: error: could not setup config headers machinery" >&2;} + { (exit 1); exit 1; }; } +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 +$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + ac_file_inputs="$ac_file_inputs '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; + esac + ;; esac + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_dots$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF - if test x"$ac_file" != x-; then - { echo "$as_me:2945: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated automatically by config.status. */ - configure_input="Generated automatically from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:2963: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo $f;; - *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:2976: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -EOF -cat >>$CONFIG_STATUS <>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub $extrasub -EOF -cat >>$CONFIG_STATUS <<\EOF +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -EOF -cat >>$CONFIG_STATUS <<\EOF +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } -# -# CONFIG_HEADER section. -# +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='[ ].*$,\1#\2' -ac_dC=' ' -ac_dD=',;t' -# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='$,\1#\2define\3' -ac_uC=' ' -ac_uD=',;t' - -for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + rm -f "$tmp/stdin" case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - test x"$ac_file" != x- && { echo "$as_me:3037: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:3048: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } - echo $f;; - *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:3061: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } - # Remove the trailing spaces. - sed 's/[ ]*$//' $ac_file_inputs >$tmp/in - -EOF - -# Transform confdefs.h into two sed scripts, `conftest.defines' and -# `conftest.undefs', that substitutes the proper values into -# config.h.in to produce config.h. The first handles `#define' -# templates, and the second `#undef' templates. -# And first: Protect against being on the right side of a sed subst in -# config.status. Protect against being in an unquoted here document -# in config.status. -rm -f conftest.defines conftest.undefs -# Using a here document instead of a string reduces the quoting nightmare. -# Putting comments in sed scripts is not portable. -# -# `end' is used to avoid that the second main sed command (meant for -# 0-ary CPP macros) applies to n-ary macro definitions. -# See the Autoconf documentation for `clear'. -cat >confdef2sed.sed <<\EOF -s/[\\&,]/\\&/g -s,[\\$`],\\&,g -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\(\([^ (][^ (]*\)([^)]*)\)[ ]*\(.*\)$,${ac_dA}\2${ac_dB}\1${ac_dC}\3${ac_dD},gp -t end -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp -: end -EOF -# If some macros were called several times there might be several times -# the same #defines, which is useless. Nevertheless, we may not want to -# sort them, since we want the *last* AC-DEFINE to be honored. -uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines -sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs -rm -f confdef2sed.sed - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >>conftest.undefs <<\EOF -s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, -EOF - -# Break up conftest.defines because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS -echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS -echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS -echo ' :' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.defines >/dev/null -do - # Write a limited-size here document to $tmp/defines.sed. - echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#define' lines. - echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/defines.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail - rm -f conftest.defines - mv conftest.tail conftest.defines -done -rm -f conftest.defines -echo ' fi # egrep' >>$CONFIG_STATUS -echo >>$CONFIG_STATUS - -# Break up conftest.undefs because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #undef templates' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.undefs >/dev/null -do - # Write a limited-size here document to $tmp/undefs.sed. - echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#undef' - echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/undefs.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail - rm -f conftest.undefs - mv conftest.tail conftest.undefs -done -rm -f conftest.undefs - -cat >>$CONFIG_STATUS <<\EOF - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated automatically by config.status. */ - if test x"$ac_file" = x-; then - echo "/* Generated automatically by configure. */" >$tmp/config.h - else - echo "/* $ac_file. Generated automatically by configure. */" >$tmp/config.h - fi - cat $tmp/in >>$tmp/config.h - rm -f $tmp/in + ;; + :H) + # + # CONFIG_HEADER + # if test x"$ac_file" != x-; then - if cmp -s $ac_file $tmp/config.h 2>/dev/null; then - { echo "$as_me:3178: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} else - ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - { case "$ac_dir" in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy="$ac_dir" -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || mkdir "$as_incr_dir" - ;; - esac -done; } - - fi - rm -f $ac_file - mv $tmp/config.h $ac_file + rm -f "$ac_file" + mv "$tmp/config.h" "$ac_file" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } fi else - cat $tmp/config.h - rm -f $tmp/config.h + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +$as_echo "$as_me: error: could not create -" >&2;} + { (exit 1); exit 1; }; } fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac done -EOF -cat >>$CONFIG_STATUS <<\EOF +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - case $ac_dest in - default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;; + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; esac -done -EOF + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + + esac +done # for ac_tag -cat >>$CONFIG_STATUS <<\EOF { (exit 0); exit 0; } -EOF +_ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save +test $ac_write_fail = 0 || + { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + + # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open @@ -3248,11 +6293,19 @@ ac_clean_files=$ac_clean_files_save # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null - $SHELL $CONFIG_STATUS || ac_cs_success=false + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/configure.in b/configure.in old mode 100755 new mode 100644 index 59611d5..e5a85a7 --- a/configure.in +++ b/configure.in @@ -1,13 +1,15 @@ dnl Process this file with autoconf to produce a configure script. -AC_INIT(fping.c) -AM_INIT_AUTOMAKE(fping, 2.4b2_to_ipv6) -AM_CONFIG_HEADER(config.h) -#VERSION=2.4b2 -#PACKAGE=fping -AC_SUBST(PACKAGE) -AC_SUBST(VERSION) -AC_DEFINE_UNQUOTED(VERSION,"$VERSION") +dnl Minimum Autoconf version required. +AC_PREREQ(2.59) + +AC_INIT([fping],[2.4b2_to4-ipv6]) + +AC_CANONICAL_TARGET +AM_INIT_AUTOMAKE +AM_MAINTAINER_MODE + +AC_CONFIG_HEADERS([config.h]) dnl Checks for programs. @@ -26,7 +28,24 @@ if test $ac_cv_func_connect = no; then AC_CHECK_LIB(socket, connect) fi +AH_TOP([ +#ifndef CONFIG_H +#define CONFIG_H +]) + +AH_BOTTOM([ +/* some OSes do not define this ... lets take a wild guess */ + +#ifndef INADDR_NONE +# define INADDR_NONE 0xffffffffU +#endif + +#endif /* CONFIG_H */ + +]) + dnl Checks for header files. AC_CHECK_HEADERS(unistd.h sys/file.h stdlib.h sys/select.h) AC_OUTPUT(Makefile) + diff --git a/depcomp b/depcomp new file mode 100755 index 0000000..df8eea7 --- /dev/null +++ b/depcomp @@ -0,0 +1,630 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2009-04-28.21; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free +# Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u="sed s,\\\\\\\\,/,g" + depmode=msvisualcpp +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> "$depfile" + echo >> "$depfile" + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/fping.8 b/fping.8 old mode 100755 new mode 100644 index a1e8411..607b548 --- a/fping.8 +++ b/fping.8 @@ -131,6 +131,8 @@ a target will be made, not including the first try. Print cumulative statistics upon exit. .IP \fB-S\fIaddr\fR 5 Set source address. +.IP \fB-I\fIif\fR 5 +Set the interface (requires SO_BINDTODEVICE support) .IP \fB-t\fIn\fR 5 Initial target timeout in milliseconds (default 500). In the default mode, this is the amount of time that @@ -141,6 +143,8 @@ multiplied by the backoff factor. Select timeout in seconds (default 10). .IP \fB-u\fR 5 Show targets that are unreachable. +.IP \fB-T\fIn\fR 5 +Set the typ of service flag (TOS). \fIn\fR can be either decimal or hexadecimal (0xh) format. .IP \fB-v\fR 5 Print .B fping diff --git a/fping.c b/fping.c old mode 100755 new mode 100644 index 98ee09d..6db4cf7 --- a/fping.c +++ b/fping.c @@ -20,8 +20,9 @@ * * Original author: Roland Schemers * IPv6 Support: Jeroen Massar - * Bugfixes, byte order & senseful seq.-numbers: Stephan Fuhrmann (stephan.fuhrmann AT 1und1.de) * Improved main loop: David Schweikert + * Debian Merge, TOS settings: Tobi Oetiker + * Bugfixes, byte order & senseful seq.-numbers: Stephan Fuhrmann (stephan.fuhrmann AT 1und1.de) * * * Redistribution and use in source and binary forms are permitted @@ -121,8 +122,8 @@ extern int h_errno; /*** Constants ***/ -#define REV_DATE "2002/01/16 00:33:42" -#define EMAIL "david@remote.net" +#define REV_DATE "2010/12/21 11:07:00" +#define EMAIL "dzubint@vcn.bc.ca" /*** Ping packet defines ***/ @@ -184,7 +185,7 @@ char *icmp_type_str[19] = "", "", "ICMP Time Exceeded", /* 11 */ - "ICMP Parameter Problem", /* 12 */ + "ICMP Paramter Problem", /* 12 */ "ICMP Timestamp Request", /* 13 */ "ICMP Timestamp Reply", /* 14 */ "ICMP Information Request", /* 15 */ @@ -425,6 +426,8 @@ int main( int argc, char **argv ) struct protoent *proto; char *buf; uid_t uid; + int tos = 0; + #ifndef IPV6 struct sockaddr_in sa; #else @@ -544,7 +547,7 @@ int main( int argc, char **argv ) /* get command line options */ - while( ( c = getopt( argc, argv, "gedhlmnqusaAvz:t:i:p:f:r:c:b:C:Q:B:S:I:T:" ) ) != EOF ) + while( ( c = getopt( argc, argv, "gedhlmnqusaAvz:t:i:p:f:r:c:b:C:Q:B:S:I:T:O:" ) ) != EOF ) { switch( c ) { @@ -659,7 +662,7 @@ int main( int argc, char **argv ) #endif /* DEBUG || _DEBUG */ case 'v': - printf( "%s: Version %s $Date: %s $\n", argv[0], VERSION, REV_DATE ); + printf( "%s: Version %s $Date: 2009-12-31 16:57:28 +0100 $\n", argv[0], VERSION, REV_DATE ); printf( "%s: comments to %s\n", argv[0], EMAIL ); exit( 0 ); @@ -706,11 +709,10 @@ int main( int argc, char **argv ) #ifdef SO_BINDTODEVICE if (setsockopt(s, SOL_SOCKET, SO_BINDTODEVICE, optarg, strlen(optarg))) - err(1, "setsockopt(AF_INET, SO_BINDTODEVICE)"); + perror("binding to specific interface (SO_BINTODEVICE)"); #else - fprintf( stderr, - "Warning: SO_BINDTODEVICE not supported, argument -I %s ignored\n", - optarg ); + printf( "%s: cant bind to a particular net interface since SO_BINDTODEVICE is not supported on your os.\n", argv[0] ); + exit(3);; #endif break; @@ -718,7 +720,13 @@ int main( int argc, char **argv ) if ( ! ( select_time = ( u_int )atoi( optarg ) * 100 ) ) usage(); break; - + case 'O': + if (sscanf(optarg,"%i",&tos)){ + if ( setsockopt(s, IPPROTO_IP, IP_TOS, &tos, sizeof(tos))) { + perror("setting type of service octet IP_TOS"); + } + } + break; default: usage(); break; @@ -757,7 +765,7 @@ int main( int argc, char **argv ) if( ( ping_data_size > MAX_PING_DATA ) || ( ping_data_size < MIN_PING_DATA ) ) { - fprintf( stderr, "%s: data size %u not valid, must be between %u and %u\n", + fprintf( stderr, "%s: data size %u not valid, must be between %lu and %u\n", prog, ping_data_size, MIN_PING_DATA, MAX_PING_DATA ); usage(); @@ -800,6 +808,7 @@ int main( int argc, char **argv ) }/* IF */ + trials = ( count > retry + 1 ) ? count : retry + 1; #if defined( DEBUG ) || defined( _DEBUG ) @@ -930,7 +939,6 @@ int main( int argc, char **argv ) int iBitpos; int iMask = 1; int failed = 0; - unsigned long uTemp; /* two possible forms are allowed here */ @@ -1315,7 +1323,7 @@ void print_per_system_stats() void print_per_system_stats( void ) #endif /* _NO_PROTO */ { - int i, j, k, avg; + int i, j, avg; HOST_ENTRY *h; char *buf; int bufsize; @@ -1424,11 +1432,10 @@ void print_per_system_splits() void print_per_system_splits( void ) #endif /* _NO_PROTO */ { - int i, j, k, avg; + int i, avg; HOST_ENTRY *h; char *buf; int bufsize; - int resp; struct tm *curr_tm; bufsize = max_hostname_len + 1; @@ -1568,6 +1575,7 @@ int send_ping( int s, HOST_ENTRY *h ) FPING_ICMPHDR *icp; PING_DATA *pdp; int n; + int myseq; buffer = ( char* )malloc( ( size_t )ping_pkt_size ); if( !buffer ) @@ -1577,7 +1585,7 @@ int send_ping( int s, HOST_ENTRY *h ) icp = ( FPING_ICMPHDR* )buffer; gettimeofday( &h->last_send_time, &tz ); - int myseq = h->num_sent * num_hosts + h->i; + myseq = h->num_sent * num_hosts + h->i; max_seq_sent = myseq > max_seq_sent ? myseq : max_seq_sent; #ifndef IPV6 @@ -1935,7 +1943,6 @@ int handle_random_icmp( FPING_ICMPHDR *p, int psize, FPING_SOCKADDR *addr ) #endif /* _NO_PROTO */ { FPING_ICMPHDR *sent_icmp; - struct ip *sent_ip; u_char *c; HOST_ENTRY *h; #ifdef IPV6 @@ -2701,7 +2708,7 @@ int u_sec; void u_sleep( int u_sec ) #endif /* _NO_PROTO */ { - int nfound, slen, n; + int nfound; struct timeval to; fd_set readset, writeset; @@ -2744,7 +2751,8 @@ int s; char *buf; int len; FPING_SOCKADDR *saddr; int timo; int recvfrom_wto( int s, char *buf, int len, FPING_SOCKADDR *saddr, int timo ) #endif /* _NO_PROTO */ { - int nfound, slen, n; + unsigned int slen; + int nfound, n; struct timeval to; fd_set readset, writeset; @@ -2916,7 +2924,7 @@ void usage( void ) fprintf( stderr, " -f file read list of targets from a file ( - means stdin) (only if no -g specified)\n" ); fprintf( stderr, " -g generate target list (only if no -f specified)\n" ); fprintf( stderr, " (specify the start and end IP in the target list, or supply a IP netmask)\n" ); - fprintf( stderr, " (ex. %s -g 192.168.1.0 192.168.1.255 or %s -g 192.168.1.0/24)\n", prog, prog ); + fprintf( stderr, " (ex. %s -g 192.168.1.0 192.168.1.255 or %s -g 192.168.1.0/24)\n", prog, prog ); fprintf( stderr, " -i n interval between sending ping packets (in millisec) (default %d)\n", interval / 100 ); fprintf( stderr, " -l loop sending pings forever\n" ); fprintf( stderr, " -m ping multiple interfaces on target host\n" ); @@ -2927,11 +2935,16 @@ void usage( void ) fprintf( stderr, " -Q n same as -q, but show summary every n seconds\n" ); fprintf( stderr, " -r n number of retries (default %d)\n", DEFAULT_RETRY ); fprintf( stderr, " -s print final stats\n" ); +#ifdef SO_BINDTODEVICE + fprintf( stderr, " -I if bind to a particular interface\n"); +#endif fprintf( stderr, " -S addr set source address\n" ); fprintf( stderr, " -t n individual target initial timeout (in millisec) (default %d)\n", timeout / 100 ); fprintf( stderr, " -T n set select timeout (default %d)\n", select_time / 100 ); fprintf( stderr, " -u show targets that are unreachable\n" ); + fprintf( stderr, " -O n set the type of service (tos) flag on the ICMP packets\n" ); fprintf( stderr, " -v show version\n" ); + fprintf( stderr, " targets list of targets to check (if no -f specified)\n" ); fprintf( stderr, "\n"); exit( 3 ); diff --git a/install-sh b/install-sh index 5871924..6781b98 100755 --- a/install-sh +++ b/install-sh @@ -1,7 +1,38 @@ -#! /bin/sh -# +#!/bin/sh # install - install a program, script, or datafile -# This comes from X11R5. + +scriptversion=2009-04-28.21; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it @@ -9,230 +40,481 @@ # # This script is compatible with the BSD install script, but was written # from scratch. -# +nl=' +' +IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec else - true + doit_exec=$doit fi -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - else - instcmd=mkdir - fi -else +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. +posix_mkdir= - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic +src= +dst= +dir_arg= +dst_arg= - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi +copy_on_change=false +no_target_directory= -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" +Options: + --help display this help and exit. + --version display version info and exit. -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. -pathcomp='' +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift +while test $# -ne 0; do + case $1 in + -c) ;; - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi + -C) copy_on_change=true;; - pathcomp="${pathcomp}/" -done -fi + -d) dir_arg=true;; -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && + -g) chgrpcmd="$chgrpprog $2" + shift;; - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else + --help) echo "$usage"; exit $?;; -# If we're going to rename the final executable, determine the name now. + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi + -o) chowncmd="$chownprog $2" + shift;; -# don't allow the sed command to completely eliminate the filename + -s) stripcmd=$stripprog;; - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi + -t) dst_arg=$2 + shift;; -# Make a temp file name in the proper directory. + -T) no_target_directory=true;; - dsttmp=$dstdir/#inst.$$# + --version) echo "$0 $scriptversion"; exit $?;; -# Move or copy the file name to the temp name + --) shift + break;; - $doit $instcmd $src $dsttmp && + -*) echo "$0: invalid option: $1" >&2 + exit 1;; - trap "rm -f ${dsttmp}" 0 && + *) break;; + esac + shift +done -# and set any options; do chmod last to preserve setuid bits +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi -# Now rename the file to the real destination. +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dst_arg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst;; + esac - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi -fi && + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done -exit 0 +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/missing b/missing index 7789652..28055d2 100755 --- a/missing +++ b/missing @@ -1,7 +1,11 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -# Copyright (C) 1996, 1997 Free Software Foundation, Inc. -# Franc,ois Pinard , 1996. + +scriptversion=2009-04-28.21; # UTC + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -14,16 +18,48 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi -case "$1" in +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; -h|--h|--he|--hel|--help) echo "\ @@ -35,21 +71,32 @@ error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file - yacc create \`y.tab.[ch]', if possible, from existing .[ch]" + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + +Send bug reports to ." + exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing - GNU libit 0.0" + echo "missing $scriptversion (GNU Automake)" + exit $? ;; -*) @@ -58,35 +105,77 @@ Supported PROGRAM values: exit 1 ;; - aclocal) +esac + +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) + # Not GNU programs, they don't have --version. + ;; + + tar*) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $program in + aclocal*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acinclude.m4' or \`configure.in'. You might want +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; - autoconf) + autoconf*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`configure.in'. You might want to install the +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; - autoheader) + autoheader*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acconfig.h' or \`configure.in'. You might want +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in` + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do - case "$f" in + case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; @@ -95,10 +184,10 @@ WARNING: \`$1' is missing on your system. You should only need it if touch $touch_files ;; - automake) + automake*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | @@ -106,81 +195,170 @@ WARNING: \`$1' is missing on your system. You should only need it if while read f; do touch "$f"; done ;; - bison|yacc) + autom4te*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison*|yacc*) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi - if [ ! -f y.tab.h ]; then + if test ! -f y.tab.h; then echo >y.tab.h fi - if [ ! -f y.tab.c ]; then + if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; - lex|flex) + lex*|flex*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi - if [ ! -f lex.yy.c ]; then + if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; - makeinfo) + help2man*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit $? + fi + ;; + + makeinfo*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 touch $file ;; + tar*) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case $firstarg in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case $firstarg in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + *) echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequirements for installing + it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 @@ -188,3 +366,11 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your esac exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/options.h b/options.h old mode 100755 new mode 100644